wiki:GeniNetworkStitchingConfirmationTestStatus/HAWAII

Version 13 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

University of Hawaii Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The HAWAII site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2017-04-19T16:35:52Z" >
<aggregate id="urn:publicid:IDN+instageni.hawaii.edu+authority+cm" url="https://www.instageni.hawaii.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2017-04-19T16:35:52Z</start>
    <end type="time">2017-04-19T16:35:52Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.hawaii.edu+node+procurve2">
  <port id="urn:publicid:IDN+instageni.hawaii.edu+stitchport+procurve2:1.24.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.hawaii.edu+interface+procurve2:1.24.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+rtsw.losa.net.internet2.edu:et-2/3/0.0:hawaii-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>1700-1719</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1.rspec:

$ stitcher.py createsliver IG-ST-1 IG-ST-1.rspec -o
12:37:06 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
12:37:06 INFO    : Reading slice IG-ST-1 credential...
12:37:06 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2017-04-26 16:36:55 UTC
12:37:06 INFO    : Calling SCS...
12:37:12 INFO    : Multi-AM reservation will include resources from these aggregates:
12:37:12 INFO    : 	<Aggregate gpo-ig>
12:37:12 INFO    : 	<Aggregate al2s>
12:37:12 INFO    : 	<Aggregate hawaii-ig>
12:37:12 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:37:41 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:37:41 INFO    : Stitcher doing createsliver at <Aggregate hawaii-ig>...
12:38:03 INFO    : ... Allocation at <Aggregate hawaii-ig> complete.
12:38:03 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
12:38:12 INFO    : ... Allocation at <Aggregate al2s> complete.
12:38:12 INFO    : All aggregates are complete.
12:38:12 INFO    : Your resources expire at 2017-04-25T16:27:12 (UTC). 
12:38:12 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each HAWAII and GPO aggregate:

$ readyToLogin.py IG-ST-1 --useSliceAggregates

ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25426  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

ig-ha's geni_status is: ready 
User lnevers logs in to ig-ha using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.hawaii.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI HAWAII VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   423 MBytes  59.0 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec   240 MBytes  33.5 Mbits/sec
[  4]  0.0-60.2 sec   106 MBytes  14.7 Mbits/sec
[  3]  0.0-60.3 sec   104 MBytes  14.5 Mbits/sec
[  6]  0.0-60.4 sec  80.0 MBytes  11.1 Mbits/sec
[  7]  0.0-60.5 sec  93.1 MBytes  12.9 Mbits/sec
[SUM]  0.0-60.5 sec   623 MBytes  86.4 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  57.1 MBytes  7.97 Mbits/sec
[  7]  0.0-60.3 sec  62.8 MBytes  8.74 Mbits/sec
[  9]  0.0-60.3 sec  65.6 MBytes  9.13 Mbits/sec
[  4]  0.0-60.3 sec  95.2 MBytes  13.2 Mbits/sec
[ 12]  0.0-60.3 sec  62.8 MBytes  8.72 Mbits/sec
[ 10]  0.0-60.4 sec  43.6 MBytes  6.06 Mbits/sec
[ 11]  0.0-60.4 sec  46.1 MBytes  6.40 Mbits/sec
[  6]  0.0-60.6 sec  42.6 MBytes  5.90 Mbits/sec
[  8]  0.0-60.6 sec  76.0 MBytes  10.5 Mbits/sec
[  5]  0.0-60.8 sec   116 MBytes  16.0 Mbits/sec
[SUM]  0.0-60.8 sec   668 MBytes  92.2 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI HAWAII VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512802 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   682 MBytes  95.4 Mbits/sec   0.094 ms 26233/512801 (5.1%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI HAWAII VM

60 packets transmitted, 60 received, 0% packet loss, time 59087ms
rtt min/avg/max/mdev = 119.686/120.010/121.539/0.327 ms

Iperf InstaGENI HAWAII VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   323 MBytes  45.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  97.2 MBytes  13.6 Mbits/sec
[  6]  0.0-60.1 sec   101 MBytes  14.1 Mbits/sec
[  5]  0.0-60.1 sec   269 MBytes  37.6 Mbits/sec
[  4]  0.0-60.2 sec  79.9 MBytes  11.1 Mbits/sec
[  7]  0.0-60.3 sec  49.1 MBytes  6.84 Mbits/sec
[SUM]  0.0-60.3 sec   596 MBytes  83.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.1 sec  57.1 MBytes  7.97 Mbits/sec
[ 11]  0.0-60.1 sec  59.8 MBytes  8.34 Mbits/sec
[  4]  0.0-60.2 sec  86.5 MBytes  12.1 Mbits/sec
[  5]  0.0-60.2 sec  85.5 MBytes  11.9 Mbits/sec
[ 12]  0.0-60.2 sec  44.9 MBytes  6.25 Mbits/sec
[  6]  0.0-60.2 sec  74.2 MBytes  10.3 Mbits/sec
[  3]  0.0-60.3 sec  62.1 MBytes  8.64 Mbits/sec
[  8]  0.0-60.3 sec  48.5 MBytes  6.74 Mbits/sec
[  9]  0.0-60.4 sec  43.0 MBytes  5.97 Mbits/sec
[  7]  0.0-60.6 sec  57.4 MBytes  7.95 Mbits/sec
[SUM]  0.0-60.6 sec   619 MBytes  85.7 Mbits/sec

Iperf InstaGENI HAWAII VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512796 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   688 MBytes  96.0 Mbits/sec   0.097 ms 21862/512795 (4.3%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI HAWAII VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 119.660/119.880/120.292/0.288 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
12:50:36 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
12:50:36 INFO    : Reading slice IG-ST-2 credential...
12:50:37 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2017-04-26 16:50:30 UTC
12:50:37 INFO    : Calling SCS...
12:50:37 INFO    : Multi-AM reservation will include resources from these aggregates:
12:50:37 INFO    : 	<Aggregate gpo-ig>
12:50:37 INFO    : 	<Aggregate al2s>
12:50:37 INFO    : 	<Aggregate hawaii-ig>
12:50:38 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:50:58 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:50:58 INFO    : Stitcher doing createsliver at <Aggregate hawaii-ig>...
12:51:20 INFO    : ... Allocation at <Aggregate hawaii-ig> complete.
12:51:20 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
12:51:34 INFO    : ... Allocation at <Aggregate al2s> complete.
12:51:34 INFO    : All aggregates are complete.
12:51:34 INFO    : Your resources expire at 2017-04-25T16:40:38 (UTC). 
12:51:34 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each HAWAII and GPO aggregate:

$ readyToLogin.py IG-ST-2 --useSliceAggregates

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"

lnevers@scorpia:~/geni-tools-2.10/stitch-test/HAWAII$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59080ms
rtt min/avg/max/mdev = 119.729/122.045/240.811/15.472 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 119.795/122.181/242.575/15.700 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
10:57:22 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
10:57:22 INFO    : Reading slice IG-ST-3 credential...
10:57:22 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2017-04-26 16:52:47 UTC
10:57:22 INFO    : Calling SCS...
10:57:23 INFO    : Multi-AM reservation will include resources from these aggregates:
10:57:23 INFO    : 	<Aggregate uwashington-ig>
10:57:23 INFO    : 	<Aggregate gpo-ig>
10:57:23 INFO    : 	<Aggregate al2s>
10:57:23 INFO    : 	<Aggregate hawaii-ig>
10:57:23 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
10:57:44 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
10:57:44 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
10:58:11 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
10:58:11 INFO    : Stitcher doing createsliver at <Aggregate hawaii-ig>...
10:58:31 INFO    : ... Allocation at <Aggregate hawaii-ig> complete.
10:58:31 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
10:58:45 INFO    : ... Allocation at <Aggregate al2s> complete.
10:58:45 INFO    : All aggregates are complete.
10:58:45 INFO    : Your resources expire at 2017-04-26T14:47:23 (UTC). 
10:58:45 INFO    : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the HAWAII host:

$ readyToLogin.py IG-ST-3 --useSliceAggregates

ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 25426  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

ig-ha's geni_status is: ready 
User lnevers logs in to ig-ha using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.hawaii.edu

ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu

Login to the HAWAII host and ping each remote:

#ping GPO IG 
lnevers@ig-hawaii:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59091ms
rtt min/avg/max/mdev = 119.728/119.900/120.039/0.212 ms


# Washington IG
lnevers@ig-hawaii:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59075ms
rtt min/avg/max/mdev = 73.056/73.212/73.541/0.186 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 
11:08:55 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
11:08:55 INFO    : Reading slice IG-ST-4 credential...
11:08:55 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2017-04-27 15:08:54 UTC
11:08:55 INFO    : Calling SCS...
11:08:55 INFO    : Multi-AM reservation will include resources from these aggregates:
11:08:55 INFO    : 	<Aggregate hawaii-ig>
11:08:55 INFO    : 	<Aggregate al2s>
11:08:55 INFO    : 	<Aggregate gpo-eg>
11:08:55 INFO    : Stitcher doing createsliver at <Aggregate hawaii-ig>...
11:09:14 INFO    : ... Allocation at <Aggregate hawaii-ig> complete.
11:09:14 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
11:09:24 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
11:09:24 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
11:09:26 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739', 'code': {'geni_code': 24}}
11:09:26 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate al2s>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739.))
11:09:26 INFO    : Deleting existing reservations...
11:09:26 INFO    : Doing deletesliver at <Aggregate hawaii-ig>...
11:09:29 INFO    : Deleted reservation at <Aggregate hawaii-ig>.
11:09:29 INFO    : Doing deletesliver at <Aggregate gpo-eg>...
11:09:32 INFO    : Deleted reservation at <Aggregate gpo-eg>.
11:09:32 INFO    : Calling SCS for the 2nd time...
11:09:33 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


11:10:03 INFO    : Multi-AM reservation will include resources from these aggregates:
11:10:03 INFO    : 	<Aggregate hawaii-ig>
11:10:03 INFO    : 	<Aggregate al2s>
11:10:03 INFO    : 	<Aggregate gpo-eg>
11:10:03 INFO    : Stitcher doing createsliver at <Aggregate hawaii-ig>...
11:10:46 INFO    : ... Allocation at <Aggregate hawaii-ig> complete.
11:10:46 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
11:10:55 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
11:10:55 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
11:11:04 INFO    : ... Allocation at <Aggregate al2s> complete.
11:11:04 INFO    : All aggregates are complete.
11:11:04 INFO    : Your resources expire at 2017-04-26T15:00:03 (UTC). 
11:11:04 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each HAWAII and GPO aggregate:

$ readyToLogin.py IG-ST-4 --useSliceAggregates

eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.11

ig-ha's geni_status is: ready 
User lnevers logs in to ig-ha using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.hawaii.edu

Measurements

Iperf ExoGENI GPO VM to InstaGENI HAWAII VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   136 MBytes  19.0 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  25.6 MBytes  3.58 Mbits/sec
[  4]  0.0-60.1 sec  31.8 MBytes  4.43 Mbits/sec
[  6]  0.0-60.2 sec  27.5 MBytes  3.83 Mbits/sec
[  3]  0.0-60.7 sec  26.1 MBytes  3.61 Mbits/sec
[  7]  0.0-60.8 sec  28.2 MBytes  3.90 Mbits/sec
[SUM]  0.0-60.8 sec   139 MBytes  19.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.4 sec  11.2 MBytes  1.56 Mbits/sec
[  5]  0.0-60.6 sec  12.5 MBytes  1.73 Mbits/sec
[  6]  0.0-60.6 sec  16.1 MBytes  2.23 Mbits/sec
[  7]  0.0-60.7 sec  17.9 MBytes  2.47 Mbits/sec
[  9]  0.0-60.7 sec  11.8 MBytes  1.62 Mbits/sec
[ 10]  0.0-60.8 sec  16.8 MBytes  2.31 Mbits/sec
[  3]  0.0-60.9 sec  11.9 MBytes  1.64 Mbits/sec
[  4]  0.0-61.1 sec  20.9 MBytes  2.87 Mbits/sec
[  8]  0.0-61.2 sec  13.6 MBytes  1.87 Mbits/sec
[ 11]  0.0-61.9 sec  9.25 MBytes  1.25 Mbits/sec
[SUM]  0.0-61.9 sec   142 MBytes  19.2 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI HAWAII VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.5 sec   140 MBytes  19.4 Mbits/sec   0.046 ms 412772/512818 (80%)
[  3]  0.0-60.5 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI HAWAII VM

60 packets transmitted, 60 received, 0% packet loss, time 59105ms
rtt min/avg/max/mdev = 119.572/119.789/120.804/0.202 ms

Iperf InstaGENI HAWAII VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2017-04-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec   128 MBytes  17.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.1 sec  27.1 MBytes  3.85 Mbits/sec
[  7]  0.0-59.1 sec  21.9 MBytes  3.11 Mbits/sec
[  6]  0.0-60.0 sec  26.5 MBytes  3.70 Mbits/sec
[  4]  0.0-60.1 sec  26.1 MBytes  3.64 Mbits/sec
[  5]  0.0-60.9 sec  36.6 MBytes  5.04 Mbits/sec
[SUM]  0.0-60.9 sec   138 MBytes  19.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  15.9 MBytes  2.21 Mbits/sec
[  3]  0.0-60.6 sec  14.1 MBytes  1.96 Mbits/sec
[ 12]  0.0-60.7 sec  9.38 MBytes  1.30 Mbits/sec
[  9]  0.0-60.7 sec  14.6 MBytes  2.02 Mbits/sec
[ 11]  0.0-60.7 sec  14.2 MBytes  1.97 Mbits/sec
[  6]  0.0-60.8 sec  15.4 MBytes  2.12 Mbits/sec
[ 10]  0.0-60.8 sec  13.8 MBytes  1.90 Mbits/sec
[  8]  0.0-61.1 sec  13.9 MBytes  1.91 Mbits/sec
[  4]  0.0-61.5 sec  15.8 MBytes  2.15 Mbits/sec
[  7]  0.0-61.7 sec  13.2 MBytes  1.80 Mbits/sec
[SUM]  0.0-61.7 sec   140 MBytes  19.1 Mbits/sec

Iperf InstaGENI HAWAII VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512633 datagrams
[  3] Server Report:
[  3]  0.0-59.8 sec   138 MBytes  19.4 Mbits/sec  14.506 ms 414092/512629 (81%)
[  3]  0.0-59.8 sec  1 datagrams received out-of-order

Ping from InstaGENI HAWAII VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59109ms
rtt min/avg/max/mdev = 119.645/119.859/120.807/0.457 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exist in the HAWAII Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs. - Incorrectly AM URL, updated GST#6249. TODO
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, No longer possible.
  1. Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6a IG-ST-6.rspec -o
09:16:39 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:16:39 INFO    : Reading slice IG-ST-6 credential...
09:16:40 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2017-05-01 18:24:36 UTC
09:16:40 INFO    : Calling SCS...
09:16:40 INFO    : Multi-AM reservation will include resources from these aggregates:
09:16:40 INFO    : 	<Aggregate nysernet-ig>
09:16:40 INFO    : 	<Aggregate al2s>
09:16:40 INFO    : 	<Aggregate hawaii-ig>
09:16:40 INFO    : Stitcher doing createsliver at <Aggregate nysernet-ig>...
09:17:03 INFO    : ... Allocation at <Aggregate nysernet-ig> complete.
09:17:03 INFO    : Stitcher doing createsliver at <Aggregate hawaii-ig>...
09:17:29 INFO    : ... Allocation at <Aggregate hawaii-ig> complete.
09:17:29 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:17:36 INFO    : ... Allocation at <Aggregate al2s> complete.
09:17:36 INFO    : All aggregates are complete.
09:17:36 INFO    : Your resources expire at 2017-05-01T13:06:40 (UTC). 
09:17:36 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-6-manifest-rspec-multiam-combined.xml'

Determined login information at each HAWAII and GPO aggregate:

$ readyToLogin.py IG-ST-6a --useSliceAggregates

ig-nyse's geni_status is: ready 
User lnevers logs in to ig-nyse using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.nysernet.org


ig-ha's geni_status is: ready 
User lnevers logs in to ig-ha using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.hawaii.edu

Measurements

Iperf InstaGENI NYSERNet VM to InstaGENI HAWAII VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-26

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   364 MBytes  50.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  87.1 MBytes  12.2 Mbits/sec
[  5]  0.0-60.2 sec   304 MBytes  42.3 Mbits/sec
[  4]  0.0-60.3 sec  46.6 MBytes  6.49 Mbits/sec
[  3]  0.0-60.4 sec  67.5 MBytes  9.38 Mbits/sec
[  6]  0.0-60.5 sec  93.6 MBytes  13.0 Mbits/sec
[SUM]  0.0-60.5 sec   599 MBytes  83.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-59.8 sec  75.9 MBytes  10.6 Mbits/sec
[  4]  0.0-59.9 sec  82.6 MBytes  11.6 Mbits/sec
[  7]  0.0-60.0 sec  63.6 MBytes  8.90 Mbits/sec
[  3]  0.0-60.0 sec  60.5 MBytes  8.46 Mbits/sec
[ 12]  0.0-60.1 sec  66.0 MBytes  9.21 Mbits/sec
[  6]  0.0-60.1 sec  59.0 MBytes  8.23 Mbits/sec
[  9]  0.0-60.2 sec  47.1 MBytes  6.57 Mbits/sec
[ 10]  0.0-60.3 sec  55.0 MBytes  7.65 Mbits/sec
[  8]  0.0-60.3 sec  56.2 MBytes  7.82 Mbits/sec
[ 11]  0.0-60.3 sec  60.1 MBytes  8.36 Mbits/sec
[SUM]  0.0-60.3 sec   626 MBytes  87.1 Mbits/sec

Iperf InstaGENI NYSERNet VM to InstaGENI HAWAII VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512801 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   666 MBytes  93.0 Mbits/sec   7.518 ms 37442/512800 (7.3%)
[  3]  0.0-60.1 sec  26 datagrams received out-of-order

Ping from InstaGENI NYSERNet VM to InstaGENI HAWAII VM

60 packets transmitted, 60 received, 0% packet loss, time 59073ms
rtt min/avg/max/mdev = 120.718/123.484/271.113/19.225 ms

Iperf InstaGENI HAWAII VM to InstaGENI NYSERNet VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-26

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   420 MBytes  58.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   154 MBytes  21.4 Mbits/sec
[  5]  0.0-60.2 sec   116 MBytes  16.2 Mbits/sec
[  4]  0.0-60.2 sec  77.9 MBytes  10.8 Mbits/sec
[  3]  0.0-60.3 sec   154 MBytes  21.4 Mbits/sec
[  7]  0.0-60.3 sec   110 MBytes  15.3 Mbits/sec
[SUM]  0.0-60.3 sec   612 MBytes  85.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.0 sec  0.00 (null)s  2459300272064687104 Bytes/sec
[  3]  0.0-60.1 sec  73.8 MBytes  10.3 Mbits/sec
[  4]  0.0-60.2 sec  75.4 MBytes  10.5 Mbits/sec
[  6]  0.0-60.3 sec  82.1 MBytes  11.4 Mbits/sec
[ 12]  0.0-60.4 sec  92.0 MBytes  12.8 Mbits/sec
[  9]  0.0-60.4 sec  60.2 MBytes  8.37 Mbits/sec
[ 11]  0.0-60.4 sec  55.9 MBytes  7.76 Mbits/sec
[  5]  0.0-60.4 sec  60.1 MBytes  8.34 Mbits/sec
[ 10]  0.0-60.5 sec  69.1 MBytes  9.59 Mbits/sec
[  7]  0.0-60.5 sec  64.8 MBytes  8.97 Mbits/sec
[SUM]  0.0-60.5 sec   630 MBytes  87.2 Mbits/sec

Iperf InstaGENI HAWAII VM to InstaGENI NYSERNet VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512772 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   681 MBytes  95.3 Mbits/sec   0.115 ms 27138/512771 (5.3%)
[  3]  0.0-60.0 sec  14 datagrams received out-of-order

Ping from InstaGENI HAWAII VM to InstaGENI NYSERNet VM

60 packets transmitted, 60 received, 0% packet loss, time 59070ms
rtt min/avg/max/mdev = 120.671/123.530/269.695/19.030 ms

Email help@geni.net for GENI support or email me with feedback on this page!