33 | | <img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/GeniDesktop/Manual/gettingStarted/Create_sliver_jacks/2.png" alt="Jacks" width="400" title="Jacks" /> |
34 | | <br /> |
35 | | <b>Figure 1-2</b> <i>Jacks after it has loaded.</i> |
36 | | </td> |
37 | | </tr> |
38 | | <tr> |
39 | | <td > |
40 | | <ol type='a' start='3'> |
41 | | <li>Click the black <b>VM</b> box and drag it onto the canvas. This icon represents a generic <code>default-vm</code> which the aggregate has a well known default for (for InstaGENI it is a Xen VM and for ExoGENI it is an ExoSmall).</li> |
42 | | <li>Repeat the above step. You should now see two <b>VM</b> boxes on the canvas.</li> |
43 | | <li>Now click near one of the VM boxes on the canvas, then click and drag towards the other VM. Release when you reach the other VM. You should now see a line and a box representing a link connecting the two VMs.</li> |
44 | | <li>The canvas should now look like the picture on the right.</li> |
| 15 | 1. Depending upon how you want to add resources to your slice, you will need to click on the appropriate button. For this example, we will click on '''Create New''' which will direct us to the Jacks RSPEC editor. |
70 | | <img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/GeniDesktop/Manual/gettingStarted/Create_sliver_jacks/4.png" alt="Relabel VM" width="400" title="Relabel VM" /> |
71 | | <br /> |
72 | | <b>Figure 1-4</b> <i>Binding the topology to an aggregate.</i> |
73 | | </td> |
74 | | </tr> |
75 | | <tr> |
76 | | <td > |
77 | | <ol type='a' start='10'> |
78 | | <li>Now click on the unlabeled box in the middle of the link.</li> |
79 | | <li>Enter an IP Address for the "node-0/client" interface of <i>10.1.1.1</i>.</li> |
80 | | <li>Enter a Mask of <i>255.255.255.0</i>.</li> |
81 | | <li>Scroll down further and set IP Address of the "node-1/server" interface to <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li> |
82 | | </ol> |
83 | | <i><b>NOTE</b>: You can also use the <b>"Auto IP"</b> button at the top left of the page if you want JACKS to automatically assign the IP Addresses</i> |
84 | | </td> |
85 | | <td> |
| 23 | [[Image(2.png)]] |
102 | | <img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/GeniDesktop/Manual/gettingStarted/Create_sliver_jacks/5.png" alt="Two VMs connected by a link" width="400" title="Two VMs connected by a link" /> |
103 | | <br /> |
104 | | <b>Figure 1-6</b> <i>Binding the topology to an aggregate.</i> |
105 | | </td> |
106 | | </tr> |
107 | | <tr> |
108 | | <td > |
109 | | <ol type='a' start='17'> |
110 | | <li>If your resource reservation was accepted by the Aggregate Managers, you would see something similar to Figure 1-7 followed by Figure 1-8</li> |
111 | | <li>The screen then transitions to the the Genidesktop page for that slice where you can perform slice/sliver related operations</li> |
112 | | </ol> |
113 | | </td> |
114 | | <td> |
| 27 | 3. Click and drag a Xen VM box onto the canvas. Click and drag another Xen VM box onto the canvas. Now click near one of the Xen VM boxes on the canvas, then click and drag towards the other Xen VM. Release when you reach the other Xen VM. You should now see a line and a box representing a link connecting the two Xen VMs. When you are finished, Jacks should look like the picture below. |
116 | | <img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/GeniDesktop/Manual/gettingStarted/Create_sliver_jacks/6.png" alt="Reserving Resources" width="400" title="Reserving Resources" /> |
117 | | <br /> |
118 | | <b>Figure 1-7</b> <i>Successfull reserved resources</i> |
119 | | </td> |
120 | | </tr> |
121 | | </tr> |
122 | | </table> |
123 | | }}} |
| 29 | [[Image(3.png)]] |
| 30 | |
| 31 | [[BR]] |
| 32 | |
| 33 | 4. Click the '''Site 1''' box and select the aggregate you want. If you would like to save this topology for future use, click the "Save to Cloud For Future Use" checkbox and fill in the required details. |
| 34 | |
| 35 | [[Image(4.png)]] |
| 36 | |
| 37 | [[BR]] |
| 38 | |
| 39 | 5. Click the '''Allocate Resources Using This RSPEC''' button at the top of the page. |
| 40 | |
| 41 | [[Image(5.png)]] |
| 42 | |
| 43 | [[BR]] |
| 44 | |
| 45 | 6. If your resource reservation is successful, you will be redirected to the GENI Desktop and see something similar to the image below. |
| 46 | |
| 47 | [[Image(6.png)]] |
| 48 | |
| 49 | [[BR]] |
| 50 | |
| 51 | [wiki:GENIExperimenter/Tutorials/GENIDesktop/05032016#ExercisesTasks Back to Tutorial] |