Changes between Version 6 and Version 7 of GeniDesktop/Manual/gdfeatures/passive_tables

Timestamp:

05/13/16 16:29:50 (8 years ago)

Author:

Hussamuddin Nasir

Comment:

--

GeniDesktop/Manual/gdfeatures/passive_tables

@@ -10 +10 @@
       <tr>
        <td> <img border="0" width=412 src="http://groups.geni.net/geni/attachment/wiki/GeniDesktop/Manual/gdfeatures/passive_tables/passive_tables.png?format=raw"/></td>
-       <td valign="middle"> This modules is very useful when you want to upload the same file to multiple GENI nodes simultaneously without storing at an intermediate location. The operation is made as simple as a just a bunch of selections and clicks in the GUI interface. To use this module
+       <td valign="middle"> 
         <ol>
-         <li>Click on the <b> File Upload Direct</b> button</li>
+         <li>Click on the <b> Tables</b> button</li>
 <li>Select the node(s) from the topology view. (You can select multiple nodes by using a CTRL+Click or just a drag of the mouse over the nodes) </li>
 <li>Click on <b>Set Selection</b> button in the small window that popped up after step 1. Make sure all the nodes you select in step 2 are listed here.</li>