Changes between Version 7 and Version 8 of GIMITestPlan


Ignore:
Timestamp:
05/14/12 17:57:06 (12 years ago)
Author:
Jeanne Ohren
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GIMITestPlan

    v7 v8  
    6161B.  Common node outside of slice, 1-2 MPs in each aggregate
    6262
    63 C.  Common node in one aggregate, 2 MPs in the other (possible?)
    64 
    65 D.  Common node in one aggregate, 1 MP in each (possible?)
     63C.  Common node in one aggregate, 1-2 MPs in each aggregate (possible?)
    6664
    6765
     
    289287===== GIM-1A-OS-10 Send Analysis Data to iRODS =====
    290288
     289=== Two Aggregates, Common node in each aggregate ===
     290
     291==== Static Install ====
     292
     293===== GIM-2A-2CN-1.  Slice/Sliver Setup =====
     294
     295This test creates a slice on two ExoGENI aggregates with 3 VMs in each aggregate using a static image with GIMI I&M packages installed.
     296One of the VMs in each aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points.
     297
     298'''Prerequisites:'''
     299 * ExoSM has made available a static image (images?) with GIMI I&M packages installed.
     300 * The resources allocated for the MCs are externally accessible by SSH and HTTP.
     301 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     302
     303'''Procedure:'''
     304 * Using OMNI, allocate three VMs from each ExoGENI AM to a slice.
     305 * Generate and install necessary certificates on the nodes?
     306 * Enable required services (examples?) on the MC and MP nodes.
     307 * Verify full connectivity of the slice (ping and ssh)
     308 * Verify required services have been enabled
     309
     310===== GIM-2A-2CN-2 Basic Measurements =====
     311
     312===== GIM-2A-2CN-3 Send Measurement Data to iRODS =====
     313
     314===== GIM-2A-2CN-4 Visualize Results =====
     315
     316===== GIM-2A-2CN-5 Send Analysis Data to iRODS =====
     317
     318==== Dynamic Install/Debian ====
     319
     320===== GIM-2A-2CN-6.  Slice/Sliver Setup =====
     321
     322This test creates a slice on two ExoGENI aggregates with 3 VMs in each aggregate using a Debian image with GIMI I&M packages installed dynamically.
     323One of the VMs in each aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points.
     324
     325'''Prerequisites:'''
     326 * ExoSM has made available a Debian image on which to install the GIMI I&M packages.
     327 * The GIMI I&M packages are available on a public web server?
     328 * The resources allocated for the MCs are externally accessible by SSH and HTTP.
     329 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     330
     331'''Procedure:'''
     332 * Using OMNI, allocate three VMs from each ExoGENI AM to a slice.
     333 * Install the GIMI I&M packages.
     334 * Generate and install necessary certificates on the nodes?
     335 * Enable required services (examples?) on the MC and MP nodes.
     336 * Verify full connectivity of the slice (ping and ssh)
     337 * Verify required services have been enabled
     338
     339===== GIM-2A-2CN-7 Basic Measurements =====
     340
     341===== GIM-2A-2CN-8 Send Measurement Data to iRODS =====
     342
     343===== GIM-2A-2CN-9 Visualize Results =====
     344
     345===== GIM-2A-2CN-10 Send Analysis Data to iRODS =====
     346
     347=== Two Aggregates, One common node outside the slice ===
     348
     349==== Static Install ====
     350
     351===== GIM-2A-CNOS-1.  Slice/Sliver Setup =====
     352
     353This test creates a slice on two ExoGENI aggregates with 2 VMs in each aggregate using a static image with GIMI I&M packages installed.
     354The two VMs in each aggregate will be measurement points.  The common (OML server) node will be located outside the slice (in the user workspace?).
     355
     356'''Prerequisites:'''
     357 * The ExoGENI AM has made available a static image (images?) with GIMI I&M packages installed.
     358 * The common node is configured outside the slice and is externally accessible by SSH and HTTP.
     359 * The common node is accessible by the VMs within the slice (which ports?).
     360 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     361
     362'''Procedure:'''
     363 * Using OMNI, allocate two VMs from each ExoGENI AM to a slice.
     364 * Generate and install necessary certificates on the nodes?
     365 * Enable required services (examples?) on the MP nodes.
     366 * Verify full connectivity of the nodes within the slice (ping and ssh) as well as connectivity to the common node outside the slice.
     367
     368===== GIM-2A-CNOS-2 Basic Measurements =====
     369
     370===== GIM-2A-CNOS-3 Send Measurement Data to iRODS =====
     371
     372===== GIM-2A-CNOS-4 Visualize Results =====
     373
     374===== GIM-2A-CNOS-5 Send Analysis Data to iRODS =====
     375
     376==== Dynamic Install/Debian ====
     377
     378===== GIM-2A-CNOS-6.  Slice/Sliver Setup =====
     379
     380This test creates a slice on two ExoGENI aggregates with 2 VMs in each aggregate using a Debian image with GIMI I&M packages installed dynamically.
     381The two VMs in each aggregate will be measurement points.  The common (OML server) node will be located outside the slice (in the user workspace?).
     382
     383'''Prerequisites:'''
     384 * The ExoGENI AM has made available a Debian image on which to install the GIMI I&M packages.
     385 * The GIMI I&M packages are available on a public web server?
     386 * The common node is configured outside the slice and is externally accessible by SSH and HTTP.
     387 * The common node is accessible by the VMs within the slice (which ports?).
     388 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     389
     390'''Procedure:'''
     391 * Using OMNI, allocate two VMs from each ExoGENI AM to a slice.
     392 * Install the GIMI I&M packages.
     393 * Generate and install necessary certificates on the nodes?
     394 * Enable required services (examples?) on the MC and MP nodes.
     395 * Verify full connectivity of the slice (ping and ssh)
     396 * Verify required services have been enabled
     397
     398===== GIM-2A-CNOS-7 Basic Measurements =====
     399
     400===== GIM-2A-CNOS-8 Send Measurement Data to iRODS =====
     401
     402===== GIM-2A-CNOS-9 Visualize Results =====
     403
     404===== GIM-2A-CNOS-10 Send Analysis Data to iRODS =====
     405
     406=== Two Aggregates, One common node in one aggregate ===
     407
     408==== Static Install ====
     409
     410===== GIM-2A-1CN-1.  Slice/Sliver Setup =====
     411
     412This test creates a slice on two ExoGENI aggregates with 3 VMs in one aggregate and 2 VMs in the other using a static image with GIMI I&M packages installed.
     413One of the VMs in the 3-VM aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points.
     414
     415'''Prerequisites:'''
     416 * The ExoGENI AM has made available a static image (images?) with GIMI I&M packages installed.
     417 * The resource allocated for the MC is externally accessible by SSH and HTTP.
     418 * The resource allocated for the MC is accessible by all VMs in both aggregates (which ports?)
     419 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     420
     421'''Procedure:'''
     422 * Using OMNI, allocate 3 VMs from one ExoGENI AM  and 2 VMs from the other to a slice.
     423 * Generate and install necessary certificates on the nodes?
     424 * Enable required services (examples?) on the MC and MP nodes.
     425 * Verify full connectivity of the slice (ping and ssh)
     426 * Verify required services have been enabled
     427
     428===== GIM-2A-1CN-2 Basic Measurements =====
     429
     430===== GIM-2A-1CN-3 Send Measurement Data to iRODS =====
     431
     432===== GIM-2A-1CN-4 Visualize Results =====
     433
     434===== GIM-2A-1CN-5 Send Analysis Data to iRODS =====
     435
     436==== Dynamic Install/Debian ====
     437
     438===== GIM-2A-1CN-6  Slice/Sliver Setup =====
     439
     440This test creates a slice on two ExoGENI aggregates with 3 VMs in one aggregate and 2 VMs in the other aggregate using a Debian image with GIMI I&M packages installed dynamically.
     441One of the VMs in the 3-VM aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points.
     442
     443'''Prerequisites:'''
     444 * The ExoGENI AM has made available a Debian image on which to install the GIMI I&M packages.
     445 * The GIMI I&M packages are available on a public web server?
     446 * The resource allocated for the MC is externally accessible by SSH and HTTP.
     447 * The resource allocated for the MC is accessible by all VMs in both aggregates (which ports?)
     448 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     449
     450'''Procedure:'''
     451 * Using OMNI, allocate three VMs from one ExoGENI AM and two VMs from the other to a slice.
     452 * Install the GIMI I&M packages.
     453 * Generate and install necessary certificates on the nodes?
     454 * Enable required services (examples?) on the MC and MP nodes.
     455 * Verify full connectivity of the slice (ping and ssh)
     456 * Verify required services have been enabled
     457
     458===== GIM-2A-1CN-7 Basic Measurements =====
     459
     460===== GIM-2A-1CN-8 Send Measurement Data to iRODS =====
     461
     462===== GIM-2A-1CN-9 Visualize Results =====
     463
     464===== GIM-2A-1CN-10 Send Analysis Data to iRODS =====