Changes between Version 5 and Version 6 of GIMITestPlan

Timestamp:

05/14/12 16:42:43 (12 years ago)

Author:

Jeanne Ohren

Comment:

--

GIMITestPlan

@@ -125 +125 @@
  * Verify required services have been enabled
 
+===== GIM-1A-IS-X Test Basic Measurements =====
+
+This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
+
+'''Prerequisites:'''
+
+An ExoGENI slice has been created and verified with 3 VMs using a static image with GIMI I&M packages installed.
+
+'''Procedure:'''
+
+Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
+Start, Stop, Restart basic measurement services using OMF EC.
+Verify that processes are being controlled correctly.
+Start basic measurement services.
+Verify that all tests/processes are executing successfully.
+Verify that expected data is collected on the MC
+
 ==== Dynamic Install/Debian ====
 
@@ -145 +162 @@
  * Verify full connectivity of the slice (ping and ssh)
  * Verify required services have been enabled
+
+===== GIM-1A-IS-X Test Basic Measurements =====
+
+This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
+
+'''Prerequisites:'''
+
+An ExoGENI slice has been created and verified with 3 VMs using a Fedora image with GIMI I&M packages installed.
+
+'''Procedure:'''
+
+Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
+Start, Stop, Restart basic measurement services using OMF EC.
+Verify that processes are being controlled correctly.
+Start basic measurement services.
+Verify that all tests/processes are executing successfully.
+Verify that expected data is collected on the MC
 
 === One Aggregate, Common node outside the slice ===
@@ -189 +223 @@
  * Verify full connectivity of the nodes within the slice (ping and ssh)  as well as connectivity to the common node outside the slice
  * Verify required services have been enabled.
-