| 3 | | = GIMI Acceptance Test Plan = |
| 4 | | |
| 5 | | The GIMI tests will build on the GPO [http://groups.geni.net/geni/wiki/GENIRacksHome/AcceptanceTests/ExogeniAcceptanceTestsPlan ExoGENI test plan]. |
| 6 | | |
| 7 | | |
| 8 | | == Process == |
| 9 | | |
| 10 | | 1. Select [wiki:GIMITestPlan#Aggregatemanagers aggregate manager] |
| 11 | | 1. Select [wiki:GIMITestPlan#Targetresourceconfigurations target resource configuration] |
| 12 | | 1. Select [wiki:GIMITestPlan#Targetsoftwareconfigurations target software configuration] |
| 13 | | 1. Select [wiki:GIMITestPlan#Experimentcontroltools tools] |
| 14 | | 1. Select [wiki:GIMITestPlan#Extensions extension] |
| 15 | | 1. Run scripts |
| 16 | | a. get resources |
| 17 | | a. load software |
| 18 | | a. configure software |
| 19 | | a. test functions |
| 20 | | a. evaluate performance |
| 21 | | |
| 22 | | |
| 23 | | == Assumptions and Dependencies == |
| 24 | | |
| 25 | | The following assumptions are made for all tests described in this plan: |
| 26 | | |
| 27 | | GPO ProtoGENI credentials from https://pgeni.gpolab.bbn.com are used for all tests.[[BR]] |
| 28 | | GPO ProtoGENI is the Slice Authority for all tests.[[BR]] |
| 29 | | All Service Manager (SM) requests MUST be made via the Omni command line tool which uses the GENI AM API.[[BR]] |
| 30 | | In all scenarios, one experiment is always equal to one slice.[[BR]] |
| 31 | | Compute resources are VMs unless otherwise stated. |
| 32 | | |
| 33 | | == Aggregate and Service Managers == |
| 34 | | ExoSM (Service Manager) |
| 35 | | BBN ExoGENI Aggregate Manager |
| 36 | | RENCI ExoGENI Aggregate Manager |
| 37 | | |
| 38 | | == Experiment control tools == |
| 39 | | |
| 40 | | OMNI |
| 41 | | |
| 42 | | OMF EC |
| 43 | | |
| 44 | | iREEL Portal |
| 45 | | |
| 46 | | iRODS client i-commands |
| 47 | | |
| 48 | | |
| 49 | | == Target resource configurations == |
| 50 | | |
| 51 | | === 1. One aggregate (RENCI or BBN ExoGENI Rack) === |
| 52 | | |
| 53 | | A. Common node in slice, 2 MPs |
| 54 | | |
| 55 | | B. Common node out of slice, 2 MPs |
| 56 | | |
| 57 | | === 2. Two aggregates (one slice, both RENCI and BBN ExoGENI Racks) === |
| 58 | | |
| 59 | | A. 1 Common node and 1-2 MPs in each aggregate |
| 60 | | |
| 61 | | B. Common node outside of slice, 1-2 MPs in each aggregate |
| 62 | | |
| 63 | | C. Common node in one aggregate, 1-2 MPs in each aggregate (possible?) |
| 64 | | |
| 65 | | |
| 66 | | == Target software configurations == |
| 67 | | |
| 68 | | === 1. Installation === |
| 69 | | ==== a. Static install (full images) ==== |
| 70 | | * how many different images? |
| 71 | | * with rspec |
| 72 | | |
| 73 | | ==== b. Dynamic install (packages on top of generic images) ==== |
| 74 | | * which images will be supported? |
| 75 | | * with rspec? |
| 76 | | |
| 77 | | === 2. Measurement configuration === |
| 78 | | * What are the configuration parameters? |
| 79 | | |
| 80 | | === 3. Add experimenter applications === |
| 81 | | * use OMF EC enable/disable app and I&M services |
| 82 | | |
| 83 | | |
| 84 | | == Extensions == |
| 85 | | |
| 86 | | === 1. Push measurement data from MC to iRODS server === |
| 87 | | |
| 88 | | === 2. Pull measurement data from iRODS server to user workspace === |
| 89 | | * analyze and visualize the data |
| 90 | | |
| 91 | | === 3. Push the analysis data from user workspace to iRODS server === |
| 92 | | |
| 93 | | |
| 94 | | |
| 95 | | |
| 96 | | == Required services == |
| 97 | | |
| 98 | | * OMF Messaging Server |
| 99 | | * iRODS Server |
| 100 | | * iREEL Web Server |
| 101 | | |
| 102 | | == Test Matrices == |
| 103 | | |
| 104 | | '''Static Installation''' |
| 105 | | || || Slice Setup || Basic Measurement || Send Data to iRODS || Analysis and Viz || Send Analysis to iRODS || |
| 106 | | || One Agg, CN inside slice || || || || || || |
| 107 | | || One Agg, CN outside slice || || || || || || |
| 108 | | || Two Agg, CN in EACH agg || || || || || || |
| 109 | | || Two Agg, CN outside slice || || || || || || |
| 110 | | || Two Agg, CN in ONE agg || || || || || || |
| 111 | | |
| 112 | | '''Dynamic Installation on Debian''' |
| 113 | | || || Slice Setup || Basic Measurement || Send Data to iRODS || Analysis and Viz || Send Analysis to iRODS || |
| 114 | | || One Agg, CN inside slice || || || || || || |
| 115 | | || One Agg, CN outside slice || || || || || || |
| 116 | | || Two Agg, CN in EACH agg || || || || || || |
| 117 | | || Two Agg, CN outside slice || || || || || || |
| 118 | | || Two Agg, CN in ONE agg || || || || || || |
| 119 | | |
| 120 | | == Test Descriptions == |
| 121 | | |
| 122 | | === One Aggregate, Common node inside the slice === |
| 123 | | |
| 124 | | ==== Static Install ==== |
| 125 | | |
| 126 | | ===== GIM-1A-IS-1. Slice/Sliver Setup ===== |
| 127 | | |
| 128 | | This test creates a slice on one ExoGENI aggregate with 3 VMs using a static image with GIMI I&M packages installed.[[BR]] |
| 129 | | One of the VMs will be the common (OML server) node and the other two VMs will be measurement points. |
| 130 | | |
| 131 | | '''Prerequisites:''' |
| 132 | | * ExoSM has made available a static image (images?) with GIMI I&M packages installed. |
| 133 | | * The resource allocated for the MC is externally accessible by SSH and HTTP. |
| 134 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 135 | | |
| 136 | | '''Procedure:''' |
| 137 | | * Using OMNI, allocate three VMs from the same ExoGENI AM to a slice. |
| 138 | | * Generate and install necessary certificates on the nodes? |
| 139 | | * Enable required services (examples?) on the MC and MP nodes. |
| 140 | | * Verify full connectivity of the slice (ping and ssh) |
| 141 | | * Verify required services have been enabled |
| 142 | | |
| 143 | | ===== GIM-1A-IS-2 Basic Measurements ===== |
| 144 | | |
| 145 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 146 | | |
| 147 | | '''Prerequisites:''' |
| 148 | | |
| 149 | | * An ExoGENI slice has been created and verified with 3 VMs using a static image with GIMI I&M packages installed. |
| 150 | | |
| 151 | | '''Procedure:''' |
| 152 | | |
| 153 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 154 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 155 | | * Verify that processes are being controlled correctly. |
| 156 | | * Start basic measurement services. |
| 157 | | * Verify that all tests/processes are executing successfully. |
| 158 | | * Verify that expected data is collected on the MC |
| 159 | | |
| 160 | | ===== GIM-1A-IS-3 Send Measurement Data to iRODS ===== |
| 161 | | |
| 162 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 163 | | |
| 164 | | '''Prerequisites:''' |
| 165 | | |
| 166 | | * An ExoGENI slice has been created and verified with 3 VMs using a static image with GIMI I&M packages installed. |
| 167 | | * Measurement data has been collected on the common node. |
| 168 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 169 | | |
| 170 | | '''Procedure:''' |
| 171 | | |
| 172 | | * Locate the measurement data on the common node. |
| 173 | | * Use the i-put command to copy data to the appropriate location on the iRODS server. |
| 174 | | * Verify that expected data is present on the iRODS server. |
| 175 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 176 | | * Verify that the expected data is present on the iRODS server. |
| 177 | | |
| 178 | | ===== GIM-1A-IS-4 Visualize Results ===== |
| 179 | | |
| 180 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 181 | | |
| 182 | | '''Prerequisites:''' |
| 183 | | |
| 184 | | * An ExoGENI slice has been created and verified with 3 VMs using a static image with GIMI I&M packages installed. |
| 185 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 186 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 187 | | |
| 188 | | '''Procedure:''' |
| 189 | | |
| 190 | | * Locate the measurement data on the iRODS server. |
| 191 | | * Use the i-get command to copy the data to the appropriate location on the user workspace. |
| 192 | | * Verify that expected data is present on the user workspace. |
| 193 | | * View the data using the iREEL GUI on the user workspace. |
| 194 | | * Perform some analysis on the data located on the user workspace. |
| 195 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 196 | | |
| 197 | | |
| 198 | | ===== GIM-1A-IS-5 Send Analysis Data to iRODS ===== |
| 199 | | |
| 200 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 201 | | |
| 202 | | '''Prerequisites:''' |
| 203 | | |
| 204 | | * An ExoGENI slice has been created and verified with 3 VMs using a static image with GIMI I&M packages installed. |
| 205 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 206 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 207 | | |
| 208 | | '''Procedure:''' |
| 209 | | |
| 210 | | * Locate the analysis results on the user workspace. |
| 211 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 212 | | * Verify that expected results are present on the iRODS server. |
| 213 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 214 | | * Verify that the expected results are present on the iRODS server. |
| 215 | | |
| 216 | | |
| 217 | | ==== Dynamic Install/Debian ==== |
| 218 | | |
| 219 | | ===== GIM-1A-IS-6. Slice/Sliver Setup ===== |
| 220 | | |
| 221 | | This test creates a slice on one ExoGENI aggregate with 3 VMs using a Debian image with GIMI I&M packages installed dynamically.[[BR]] |
| 222 | | One of the VMs will be the common (OML server) node and the other two VMs will be measurement points. |
| 223 | | |
| 224 | | '''Prerequisites:''' |
| 225 | | * ExoSM has made available a Debian image on which to install the GIMI I&M packages. |
| 226 | | * The GIMI I&M packages are available on a public web server? |
| 227 | | * The resource allocated for the MC is externally accessible by SSH and HTTP. |
| 228 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 229 | | |
| 230 | | '''Procedure:''' |
| 231 | | * Using OMNI, allocate three VMs from the same ExoGENI AM to a slice. |
| 232 | | * Install the GIMI I&M packages. |
| 233 | | * Generate and install necessary certificates on the nodes? |
| 234 | | * Enable required services (examples?) on the MC and MP nodes. |
| 235 | | * Verify full connectivity of the slice (ping and ssh) |
| 236 | | * Verify required services have been enabled |
| 237 | | |
| 238 | | ===== GIM-1A-IS-7 Basic Measurements ===== |
| 239 | | |
| 240 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 241 | | |
| 242 | | '''Prerequisites:''' |
| 243 | | |
| 244 | | * An ExoGENI slice has been created and verified with 3 VMs using a Debian image with GIMI I&M packages installed. |
| 245 | | |
| 246 | | '''Procedure:''' |
| 247 | | |
| 248 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 249 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 250 | | * Verify that processes are being controlled correctly. |
| 251 | | * Start basic measurement services. |
| 252 | | * Verify that all tests/processes are executing successfully. |
| 253 | | * Verify that expected data is collected on the MC |
| 254 | | |
| 255 | | |
| 256 | | ===== GIM-1A-IS-8 Send Measurement Data to iRODS ===== |
| 257 | | |
| 258 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 259 | | |
| 260 | | '''Prerequisites:''' |
| 261 | | |
| 262 | | * An ExoGENI slice has been created and verified with 3 VMs using a Debian image with GIMI I&M packages installed. |
| 263 | | * Measurement data has been collected on the common node. |
| 264 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 265 | | |
| 266 | | '''Procedure:''' |
| 267 | | |
| 268 | | * Locate the measurement data on the common node. |
| 269 | | * Use the i-put command to copy the data to the appropriate location on the iRODS server. |
| 270 | | * Verify that expected data is present on the iRODS server. |
| 271 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 272 | | * Verify that the expected data is present on the iRODS server. |
| 273 | | |
| 274 | | ===== GIM-1A-IS-9 Visualize Results ===== |
| 275 | | |
| 276 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 277 | | |
| 278 | | '''Prerequisites:''' |
| 279 | | |
| 280 | | * An ExoGENI slice has been created and verified with 3 VMs using a Debian image with GIMI I&M packages installed. |
| 281 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 282 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 283 | | |
| 284 | | '''Procedure:''' |
| 285 | | |
| 286 | | * Locate the measurement data on the iRODS server. |
| 287 | | * Use the i-get command to copy the data to the appropriate location on the user workspace. |
| 288 | | * Verify that expected data is present on the user workspace. |
| 289 | | * View the data using the iREEL GUI on the user workspace. |
| 290 | | * Perform some analysis on the data located on the user workspace. |
| 291 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 292 | | |
| 293 | | |
| 294 | | ===== GIM-1A-IS-10 Send Analysis Data to iRODS ===== |
| 295 | | |
| 296 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 297 | | |
| 298 | | '''Prerequisites:''' |
| 299 | | |
| 300 | | * An ExoGENI slice has been created and verified with 3 VMs using a Debian image with GIMI I&M packages installed. |
| 301 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 302 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 303 | | |
| 304 | | '''Procedure:''' |
| 305 | | |
| 306 | | * Locate the analysis results on the user workspace. |
| 307 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 308 | | * Verify that expected results are present on the iRODS server. |
| 309 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 310 | | * Verify that the expected results are present on the iRODS server. |
| 311 | | |
| 312 | | |
| 313 | | === One Aggregate, Common node outside the slice === |
| 314 | | |
| 315 | | ==== Static Install ==== |
| 316 | | |
| 317 | | ===== GIM-1A-OS-1. Slice/Sliver Setup ===== |
| 318 | | |
| 319 | | This test creates a slice on one ExoGENI aggregate with 2 VMs using a static image with GIMI I&M packages installed.[[BR]] |
| 320 | | Both VMs will be measurement points. The common (OML server) node will be located outside the slice (in the user workspace?). |
| 321 | | |
| 322 | | '''Prerequisites:''' |
| 323 | | * ExoSM has made available a static image (images?) with GIMI I&M packages installed. |
| 324 | | * The common node is configured outside the slice and is externally accessible by SSH and HTTP. |
| 325 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 326 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 327 | | |
| 328 | | '''Procedure:''' |
| 329 | | * Using OMNI, allocate two VMs from the same ExoGENI AM to a slice. |
| 330 | | * Generate and install necessary certificates on the nodes? |
| 331 | | * Enable required services (examples?) on the MP nodes. |
| 332 | | * Verify full connectivity of the nodes within the slice (ping and ssh) as well as connectivity to the common node outside the slice. |
| 333 | | * Verify required services have been enabled. |
| 334 | | |
| 335 | | ===== GIM-1A-OS-2 Basic Measurements ===== |
| 336 | | |
| 337 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 338 | | |
| 339 | | '''Prerequisites:''' |
| 340 | | |
| 341 | | * An ExoGENI slice has been created and verified with 2 VMs using a static image with GIMI I&M packages installed. |
| 342 | | * The common (OML server) node is located on a node outside the slice and externally accessible. |
| 343 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 344 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 345 | | |
| 346 | | '''Procedure:''' |
| 347 | | |
| 348 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 349 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 350 | | * Verify that processes are being controlled correctly. |
| 351 | | * Start basic measurement services. |
| 352 | | * Verify that all tests/processes are executing successfully. |
| 353 | | * Verify that expected data is collected on the MC. |
| 354 | | |
| 355 | | ===== GIM-1A-OS-3 Send Measurement Data to iRODS ===== |
| 356 | | |
| 357 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 358 | | |
| 359 | | '''Prerequisites:''' |
| 360 | | |
| 361 | | * An ExoGENI slice has been created and verified with 2 VMs using a static image with GIMI I&M packages installed. |
| 362 | | * Measurement data has been collected on the common node. |
| 363 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 364 | | |
| 365 | | '''Procedure:''' |
| 366 | | |
| 367 | | * Locate the measurement data on the common node. |
| 368 | | * Use the i-put command to copy the data to the appropriate location on the iRODS server. |
| 369 | | * Verify that expected data is present on the iRODS server. |
| 370 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 371 | | * Verify that the expected data is present on the iRODS server. |
| 372 | | |
| 373 | | |
| 374 | | ===== GIM-1A-OS-4 Visualize Results ===== |
| 375 | | |
| 376 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 377 | | |
| 378 | | '''Prerequisites:''' |
| 379 | | |
| 380 | | * An ExoGENI slice has been created and verified with 2 VMs using a static image with GIMI I&M packages installed. |
| 381 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 382 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 383 | | |
| 384 | | '''Procedure:''' |
| 385 | | |
| 386 | | * Locate the measurement data on the iRODS server. |
| 387 | | * Use the i-get command to copy the data to the appropriate location on the user workspace. |
| 388 | | * Verify that expected data is present on the user workspace. |
| 389 | | * View the data using the iREEL GUI on the user workspace. |
| 390 | | * Perform some analysis on the data located on the user workspace. |
| 391 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 392 | | |
| 393 | | |
| 394 | | ===== GIM-1A-OS-5 Send Analysis Data to iRODS ===== |
| 395 | | |
| 396 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 397 | | |
| 398 | | '''Prerequisites:''' |
| 399 | | |
| 400 | | * An ExoGENI slice has been created and verified with 2 VMs using a static image with GIMI I&M packages installed. |
| 401 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 402 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 403 | | |
| 404 | | '''Procedure:''' |
| 405 | | |
| 406 | | * Locate the analysis results on the user workspace. |
| 407 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 408 | | * Verify that expected results are present on the iRODS server. |
| 409 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 410 | | * Verify that the expected results are present on the iRODS server. |
| 411 | | |
| 412 | | |
| 413 | | ==== Dynamic Install/Debian ==== |
| 414 | | |
| 415 | | ===== GIM-1A-OS-6. Slice/Sliver Setup ===== |
| 416 | | |
| 417 | | This test creates a slice on one ExoGENI aggregate with 2 VMs using a Debian image with GIMI I&M packages installed dynamically.[[BR]] |
| 418 | | Both VMs will be measurement points. The common (OML server) node will be located outside the slice (in the user workspace?). |
| 419 | | |
| 420 | | '''Prerequisites:''' |
| 421 | | * The aggregate/rack has made available a Debian image on which to install the GIMI I&M packages. |
| 422 | | * The GIMI I&M packages are available on a public web server? |
| 423 | | * The common node is configured outside the slice and is externally accessible by SSH and HTTP. |
| 424 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 425 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 426 | | |
| 427 | | '''Procedure:''' |
| 428 | | * Using OMNI, allocate two VMs from the same ExoGENI AM to a slice. |
| 429 | | * Install the GIMI I&M packages. |
| 430 | | * Generate and install necessary certificates on the nodes? |
| 431 | | * Enable required services (examples?) on the MC and MP nodes. |
| 432 | | * Verify full connectivity of the nodes within the slice (ping and ssh) as well as connectivity to the common node outside the slice |
| 433 | | * Verify required services have been enabled. |
| 434 | | |
| 435 | | ===== GIM-1A-OS-7 Basic Measurements ===== |
| 436 | | |
| 437 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 438 | | |
| 439 | | '''Prerequisites:''' |
| 440 | | |
| 441 | | * An ExoGENI slice has been created and verified with 2 VMs using a Debian image with GIMI I&M packages installed. |
| 442 | | * The common (OML server) node is located on a node outside the slice and externally accessible. |
| 443 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 444 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 445 | | |
| 446 | | '''Procedure:''' |
| 447 | | |
| 448 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 449 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 450 | | * Verify that processes are being controlled correctly. |
| 451 | | * Start basic measurement services. |
| 452 | | * Verify that all tests/processes are executing successfully. |
| 453 | | * Verify that expected data is collected on the MC |
| 454 | | |
| 455 | | ===== GIM-1A-OS-8 Send Measurement Data to iRODS ===== |
| 456 | | |
| 457 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 458 | | |
| 459 | | '''Prerequisites:''' |
| 460 | | |
| 461 | | * An ExoGENI slice has been created and verified with 2 VMs using a Debian image with GIMI I&M packages installed. |
| 462 | | * Measurement data has been collected on the common node. |
| 463 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 464 | | |
| 465 | | '''Procedure:''' |
| 466 | | |
| 467 | | * Locate the measurement data on the common node. |
| 468 | | * Use the i-put command to copy the data to the appropriate location on the iRODS server. |
| 469 | | * Verify that expected data is present on the iRODS server. |
| 470 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 471 | | * Verify that the expected data is present on the iRODS server. |
| 472 | | |
| 473 | | |
| 474 | | ===== GIM-1A-OS-9 Visualize Results ===== |
| 475 | | |
| 476 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 477 | | |
| 478 | | '''Prerequisites:''' |
| 479 | | |
| 480 | | * An ExoGENI slice has been created and verified with 2 VMs using a Debian image with GIMI I&M packages installed. |
| 481 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 482 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 483 | | |
| 484 | | '''Procedure:''' |
| 485 | | |
| 486 | | * Locate the measurement data on the iRODS server. |
| 487 | | * Use the i-get command to copy the data to the appropriate location on the user workspace. |
| 488 | | * Verify that expected data is present on the user workspace. |
| 489 | | * View the data using the iREEL GUI on the user workspace. |
| 490 | | * Perform some analysis on the data located on the user workspace. |
| 491 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 492 | | |
| 493 | | |
| 494 | | ===== GIM-1A-OS-10 Send Analysis Data to iRODS ===== |
| 495 | | |
| 496 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 497 | | |
| 498 | | '''Prerequisites:''' |
| 499 | | |
| 500 | | * An ExoGENI slice has been created and verified with 2 VMs using a Debian image with GIMI I&M packages installed. |
| 501 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 502 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 503 | | |
| 504 | | '''Procedure:''' |
| 505 | | |
| 506 | | * Locate the analysis results on the user workspace. |
| 507 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 508 | | * Verify that expected results are present on the iRODS server. |
| 509 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 510 | | * Verify that the expected results are present on the iRODS server. |
| 511 | | |
| 512 | | |
| 513 | | === Two Aggregates, Common node in each aggregate === |
| 514 | | |
| 515 | | ==== Static Install ==== |
| 516 | | |
| 517 | | ===== GIM-2A-2CN-1. Slice/Sliver Setup ===== |
| 518 | | |
| 519 | | This test creates a slice on two ExoGENI aggregates with 3 VMs in each aggregate using a static image with GIMI I&M packages installed.[[BR]] |
| 520 | | One of the VMs in each aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points. |
| 521 | | |
| 522 | | '''Prerequisites:''' |
| 523 | | * ExoSM has made available a static image (images?) with GIMI I&M packages installed. |
| 524 | | * The resources allocated for the MCs are externally accessible by SSH and HTTP. |
| 525 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 526 | | |
| 527 | | '''Procedure:''' |
| 528 | | * Using OMNI, allocate three VMs from each ExoGENI AM to a slice. |
| 529 | | * Generate and install necessary certificates on the nodes? |
| 530 | | * Enable required services (examples?) on the MC and MP nodes. |
| 531 | | * Verify full connectivity of the slice (ping and ssh) |
| 532 | | * Verify required services have been enabled |
| 533 | | |
| 534 | | ===== GIM-2A-2CN-2 Basic Measurements ===== |
| 535 | | |
| 536 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 537 | | |
| 538 | | '''Prerequisites:''' |
| 539 | | |
| 540 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 541 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. |
| 542 | | |
| 543 | | '''Procedure:''' |
| 544 | | |
| 545 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the appropriate MC (MPs push to the MC in the same aggregate). |
| 546 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 547 | | * Verify that processes are being controlled correctly. |
| 548 | | * Start basic measurement services. |
| 549 | | * Verify that all tests/processes are executing successfully. |
| 550 | | * Verify that expected data is collected on each of the MCs |
| 551 | | |
| 552 | | ===== GIM-2A-2CN-3 Send Measurement Data to iRODS ===== |
| 553 | | |
| 554 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 555 | | |
| 556 | | '''Prerequisites:''' |
| 557 | | |
| 558 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 559 | | * Measurement data has been collected on the common nodes. |
| 560 | | * The iRODS client has been installed on the common nodes and configured to use the appropriate iRODS account. |
| 561 | | |
| 562 | | '''Procedure:''' |
| 563 | | |
| 564 | | * Locate the measurement data on the common nodes. |
| 565 | | * Use the i-put command to copy the data to the appropriate location on the iRODS server. |
| 566 | | * Verify that expected data is present on the iRODS server. |
| 567 | | * Use irsync to copy measurement data to the appropriate location on the iRODS server. |
| 568 | | * Verify that the expected data is present on the iRODS server. |
| 569 | | |
| 570 | | |
| 571 | | ===== GIM-2A-2CN-4 Visualize Results ===== |
| 572 | | |
| 573 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 574 | | |
| 575 | | '''Prerequisites:''' |
| 576 | | |
| 577 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 578 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 579 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 580 | | |
| 581 | | '''Procedure:''' |
| 582 | | |
| 583 | | * Locate the measurement data on the iRODS server. |
| 584 | | * Use the i-get command to copy the data to the appropriate location on the user workspace. |
| 585 | | * Verify that expected data is present on the user workspace. |
| 586 | | * View the data using the iREEL GUI on the user workspace. |
| 587 | | * Perform some analysis on the data located on the user workspace. |
| 588 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 589 | | |
| 590 | | |
| 591 | | ===== GIM-2A-2CN-5 Send Analysis Data to iRODS ===== |
| 592 | | |
| 593 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 594 | | |
| 595 | | '''Prerequisites:''' |
| 596 | | |
| 597 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 598 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 599 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 600 | | |
| 601 | | '''Procedure:''' |
| 602 | | |
| 603 | | * Locate the analysis results on the user workspace. |
| 604 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 605 | | * Verify that expected results are present on the iRODS server. |
| 606 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 607 | | * Verify that the expected results are present on the iRODS server. |
| 608 | | |
| 609 | | |
| 610 | | ==== Dynamic Install/Debian ==== |
| 611 | | |
| 612 | | ===== GIM-2A-2CN-6. Slice/Sliver Setup ===== |
| 613 | | |
| 614 | | This test creates a slice on two ExoGENI aggregates with 3 VMs in each aggregate using a Debian image with GIMI I&M packages installed dynamically.[[BR]] |
| 615 | | One of the VMs in each aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points. |
| 616 | | |
| 617 | | '''Prerequisites:''' |
| 618 | | * ExoSM has made available a Debian image on which to install the GIMI I&M packages. |
| 619 | | * The GIMI I&M packages are available on a public web server? |
| 620 | | * The resources allocated for the MCs are externally accessible by SSH and HTTP. |
| 621 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 622 | | |
| 623 | | '''Procedure:''' |
| 624 | | * Using OMNI, allocate three VMs from each ExoGENI AM to a slice. |
| 625 | | * Install the GIMI I&M packages. |
| 626 | | * Generate and install necessary certificates on the nodes? |
| 627 | | * Enable required services (examples?) on the MC and MP nodes. |
| 628 | | * Verify full connectivity of the slice (ping and ssh) |
| 629 | | * Verify required services have been enabled |
| 630 | | |
| 631 | | ===== GIM-2A-2CN-7 Basic Measurements ===== |
| 632 | | |
| 633 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 634 | | |
| 635 | | '''Prerequisites:''' |
| 636 | | |
| 637 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a Debian image with GIMI I&M packages installed. |
| 638 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. |
| 639 | | |
| 640 | | '''Procedure:''' |
| 641 | | |
| 642 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the appropriate MC (MPs push to the MC in the same aggregate). |
| 643 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 644 | | * Verify that processes are being controlled correctly. |
| 645 | | * Start basic measurement services. |
| 646 | | * Verify that all tests/processes are executing successfully. |
| 647 | | * Verify that expected data is collected on each of the MCs |
| 648 | | |
| 649 | | ===== GIM-2A-2CN-8 Send Measurement Data to iRODS ===== |
| 650 | | |
| 651 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 652 | | |
| 653 | | '''Prerequisites:''' |
| 654 | | |
| 655 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a Debian image with GIMI I&M packages installed. |
| 656 | | * Measurement data has been collected on the common nodes. |
| 657 | | * The iRODS client has been installed on the common nodes and configured to use the appropriate iRODS account. |
| 658 | | |
| 659 | | '''Procedure:''' |
| 660 | | |
| 661 | | * Locate the measurement data on the common nodes. |
| 662 | | * Use the i-put command to copy the measurement data to the appropriate location on the iRODS server. |
| 663 | | * Verify that expected data is present on the iRODS server. |
| 664 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 665 | | * Verify that the expected data is present on the iRODS server. |
| 666 | | |
| 667 | | |
| 668 | | ===== GIM-2A-2CN-9 Visualize Results ===== |
| 669 | | |
| 670 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 671 | | |
| 672 | | '''Prerequisites:''' |
| 673 | | |
| 674 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a Debian image with GIMI I&M packages installed. |
| 675 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 676 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 677 | | |
| 678 | | '''Procedure:''' |
| 679 | | |
| 680 | | * Locate the measurement data on the iRODS server. |
| 681 | | * Use the i-get command to copy the measurement data to the appropriate location on the user workspace. |
| 682 | | * Verify that expected data is present on the user workspace. |
| 683 | | * View the data using the iREEL GUI on the user workspace. |
| 684 | | * Perform some analysis on the data located on the user workspace. |
| 685 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 686 | | |
| 687 | | |
| 688 | | ===== GIM-2A-2CN-10 Send Analysis Data to iRODS ===== |
| 689 | | |
| 690 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 691 | | |
| 692 | | '''Prerequisites:''' |
| 693 | | |
| 694 | | * An ExoGENI slice has been created and verified with 2 common node VMs and 4 MP VMs using a Debian image with GIMI I&M packages installed. |
| 695 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 696 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 697 | | |
| 698 | | '''Procedure:''' |
| 699 | | |
| 700 | | * Locate the analysis results on the user workspace. |
| 701 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 702 | | * Verify that expected results are present on the iRODS server. |
| 703 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 704 | | * Verify that the expected results are present on the iRODS server. |
| 705 | | |
| 706 | | |
| 707 | | === Two Aggregates, One common node outside the slice === |
| 708 | | |
| 709 | | ==== Static Install ==== |
| 710 | | |
| 711 | | ===== GIM-2A-CNOS-1. Slice/Sliver Setup ===== |
| 712 | | |
| 713 | | This test creates a slice on two ExoGENI aggregates with 2 VMs in each aggregate using a static image with GIMI I&M packages installed.[[BR]] |
| 714 | | The two VMs in each aggregate will be measurement points. The common (OML server) node will be located outside the slice (in the user workspace?). |
| 715 | | |
| 716 | | '''Prerequisites:''' |
| 717 | | * The ExoGENI AM has made available a static image (images?) with GIMI I&M packages installed. |
| 718 | | * The common node is configured outside the slice and is externally accessible by SSH and HTTP. |
| 719 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 720 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 721 | | |
| 722 | | '''Procedure:''' |
| 723 | | * Using OMNI, allocate two VMs from each ExoGENI AM to a slice. |
| 724 | | * Generate and install necessary certificates on the nodes? |
| 725 | | * Enable required services (examples?) on the MP nodes. |
| 726 | | * Verify full connectivity of the nodes within the slice (ping and ssh) as well as connectivity to the common node outside the slice. |
| 727 | | |
| 728 | | ===== GIM-2A-CNOS-2 Basic Measurements ===== |
| 729 | | |
| 730 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 731 | | |
| 732 | | '''Prerequisites:''' |
| 733 | | |
| 734 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a static image with GIMI I&M packages installed. |
| 735 | | * The common (OML server) node is located on a node outside the slice and externally accessible. |
| 736 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 737 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. |
| 738 | | |
| 739 | | '''Procedure:''' |
| 740 | | |
| 741 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 742 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 743 | | * Verify that processes are being controlled correctly. |
| 744 | | * Start basic measurement services. |
| 745 | | * Verify that all tests/processes are executing successfully. |
| 746 | | |
| 747 | | ===== GIM-2A-CNOS-3 Send Measurement Data to iRODS ===== |
| 748 | | |
| 749 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 750 | | |
| 751 | | '''Prerequisites:''' |
| 752 | | |
| 753 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a static image with GIMI I&M packages installed. |
| 754 | | * Measurement data has been collected on the common node. |
| 755 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 756 | | |
| 757 | | '''Procedure:''' |
| 758 | | |
| 759 | | * Locate the measurement data on the common node. |
| 760 | | * Use the i-put command to copy the measurement data to the appropriate location on the iRODS server. |
| 761 | | * Verify that expected data is present on the iRODS server. |
| 762 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 763 | | * Verify that the expected data is present on the iRODS server. |
| 764 | | |
| 765 | | |
| 766 | | ===== GIM-2A-CNOS-4 Visualize Results ===== |
| 767 | | |
| 768 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 769 | | |
| 770 | | '''Prerequisites:''' |
| 771 | | |
| 772 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a static image with GIMI I&M packages installed. |
| 773 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 774 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 775 | | |
| 776 | | '''Procedure:''' |
| 777 | | |
| 778 | | * Locate the measurement data on the iRODS server. |
| 779 | | * Use the i-get command to copy the measurement data to the appropriate location on the user workspace. |
| 780 | | * Verify that expected data is present on the user workspace. |
| 781 | | * View the data using the iREEL GUI on the user workspace. |
| 782 | | * Perform some analysis on the data located on the user workspace. |
| 783 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 784 | | |
| 785 | | |
| 786 | | ===== GIM-2A-CNOS-5 Send Analysis Data to iRODS ===== |
| 787 | | |
| 788 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 789 | | |
| 790 | | '''Prerequisites:''' |
| 791 | | |
| 792 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a static image with GIMI I&M packages installed. |
| 793 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 794 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 795 | | |
| 796 | | '''Procedure:''' |
| 797 | | |
| 798 | | * Locate the analysis results on the user workspace. |
| 799 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 800 | | * Verify that expected results are present on the iRODS server. |
| 801 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 802 | | * Verify that the expected results are present on the iRODS server. |
| 803 | | |
| 804 | | |
| 805 | | ==== Dynamic Install/Debian ==== |
| 806 | | |
| 807 | | ===== GIM-2A-CNOS-6. Slice/Sliver Setup ===== |
| 808 | | |
| 809 | | This test creates a slice on two ExoGENI aggregates with 2 VMs in each aggregate using a Debian image with GIMI I&M packages installed dynamically.[[BR]] |
| 810 | | The two VMs in each aggregate will be measurement points. The common (OML server) node will be located outside the slice (in the user workspace?). |
| 811 | | |
| 812 | | '''Prerequisites:''' |
| 813 | | * The ExoGENI AM has made available a Debian image on which to install the GIMI I&M packages. |
| 814 | | * The GIMI I&M packages are available on a public web server? |
| 815 | | * The common node is configured outside the slice and is externally accessible by SSH and HTTP. |
| 816 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 817 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 818 | | |
| 819 | | '''Procedure:''' |
| 820 | | * Using OMNI, allocate two VMs from each ExoGENI AM to a slice. |
| 821 | | * Install the GIMI I&M packages. |
| 822 | | * Generate and install necessary certificates on the nodes? |
| 823 | | * Enable required services (examples?) on the MC and MP nodes. |
| 824 | | * Verify full connectivity of the slice (ping and ssh) |
| 825 | | * Verify required services have been enabled |
| 826 | | |
| 827 | | ===== GIM-2A-CNOS-7 Basic Measurements ===== |
| 828 | | |
| 829 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 830 | | |
| 831 | | '''Prerequisites:''' |
| 832 | | |
| 833 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 834 | | * The common (OML server) node is located on a node outside the slice and externally accessible. |
| 835 | | * The common node is accessible by the VMs within the slice (which ports?). |
| 836 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. |
| 837 | | |
| 838 | | '''Procedure:''' |
| 839 | | |
| 840 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 841 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 842 | | * Verify that processes are being controlled correctly. |
| 843 | | * Start basic measurement services. |
| 844 | | * Verify that all tests/processes are executing successfully. |
| 845 | | |
| 846 | | ===== GIM-2A-CNOS-8 Send Measurement Data to iRODS ===== |
| 847 | | |
| 848 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 849 | | |
| 850 | | '''Prerequisites:''' |
| 851 | | |
| 852 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 853 | | * Measurement data has been collected on the common node. |
| 854 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 855 | | |
| 856 | | '''Procedure:''' |
| 857 | | |
| 858 | | * Locate the measurement data on the common node. |
| 859 | | * Use the i-put command to copy the measurement data to the appropriate location on the iRODS server. |
| 860 | | * Verify that expected data is present on the iRODS server. |
| 861 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 862 | | * Verify that the expected data is present on the iRODS server. |
| 863 | | |
| 864 | | |
| 865 | | ===== GIM-2A-CNOS-9 Visualize Results ===== |
| 866 | | |
| 867 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 868 | | |
| 869 | | '''Prerequisites:''' |
| 870 | | |
| 871 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 872 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 873 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 874 | | |
| 875 | | '''Procedure:''' |
| 876 | | |
| 877 | | * Locate the measurement data on the iRODS server. |
| 878 | | * Use the i-get command to copy the measurement data to the appropriate location on the user workspace. |
| 879 | | * Verify that expected data is present on the user workspace. |
| 880 | | * View the data using the iREEL GUI on the user workspace. |
| 881 | | * Perform some analysis on the data located on the user workspace. |
| 882 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 883 | | |
| 884 | | |
| 885 | | ===== GIM-2A-CNOS-10 Send Analysis Data to iRODS ===== |
| 886 | | |
| 887 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 888 | | |
| 889 | | '''Prerequisites:''' |
| 890 | | |
| 891 | | * An ExoGENI slice has been created and verified with 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 892 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 893 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 894 | | |
| 895 | | '''Procedure:''' |
| 896 | | |
| 897 | | * Locate the analysis results on the user workspace. |
| 898 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 899 | | * Verify that expected results are present on the iRODS server. |
| 900 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 901 | | * Verify that the expected results are present on the iRODS server. |
| 902 | | |
| 903 | | |
| 904 | | === Two Aggregates, One common node in one aggregate === |
| 905 | | |
| 906 | | ==== Static Install ==== |
| 907 | | |
| 908 | | ===== GIM-2A-1CN-1. Slice/Sliver Setup ===== |
| 909 | | |
| 910 | | This test creates a slice on two ExoGENI aggregates with 3 VMs in one aggregate and 2 VMs in the other using a static image with GIMI I&M packages installed.[[BR]] |
| 911 | | One of the VMs in the 3-VM aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points. |
| 912 | | |
| 913 | | '''Prerequisites:''' |
| 914 | | * The ExoGENI AM has made available a static image (images?) with GIMI I&M packages installed. |
| 915 | | * The resource allocated for the MC is externally accessible by SSH and HTTP. |
| 916 | | * The resource allocated for the MC is accessible by all VMs in both aggregates (which ports?) |
| 917 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 918 | | |
| 919 | | '''Procedure:''' |
| 920 | | * Using OMNI, allocate 3 VMs from one ExoGENI AM and 2 VMs from the other to a slice. |
| 921 | | * Generate and install necessary certificates on the nodes? |
| 922 | | * Enable required services (examples?) on the MC and MP nodes. |
| 923 | | * Verify full connectivity of the slice (ping and ssh) |
| 924 | | * Verify required services have been enabled |
| 925 | | |
| 926 | | ===== GIM-2A-1CN-2 Basic Measurements ===== |
| 927 | | |
| 928 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 929 | | |
| 930 | | '''Prerequisites:''' |
| 931 | | |
| 932 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 933 | | * The common node is accessible by all MP VMs within the slice (which ports?). |
| 934 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. |
| 935 | | |
| 936 | | '''Procedure:''' |
| 937 | | |
| 938 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 939 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 940 | | * Verify that processes are being controlled correctly. |
| 941 | | * Start basic measurement services. |
| 942 | | * Verify that all tests/processes are executing successfully. |
| 943 | | |
| 944 | | |
| 945 | | ===== GIM-2A-1CN-3 Send Measurement Data to iRODS ===== |
| 946 | | |
| 947 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 948 | | |
| 949 | | '''Prerequisites:''' |
| 950 | | |
| 951 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 952 | | * Measurement data has been collected on the common node. |
| 953 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 954 | | |
| 955 | | '''Procedure:''' |
| 956 | | |
| 957 | | * Locate the measurement data on the common node. |
| 958 | | * Use the i-put command to copy the measurement data to the appropriate location on the iRODS server. |
| 959 | | * Verify that expected data is present on the iRODS server. |
| 960 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 961 | | * Verify that the expected data is present on the iRODS server. |
| 962 | | |
| 963 | | |
| 964 | | ===== GIM-2A-1CN-4 Visualize Results ===== |
| 965 | | |
| 966 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 967 | | |
| 968 | | '''Prerequisites:''' |
| 969 | | |
| 970 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 971 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 972 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 973 | | |
| 974 | | '''Procedure:''' |
| 975 | | |
| 976 | | * Locate the measurement data on the iRODS server. |
| 977 | | * Use the i-get command to copy the measurement data to the appropriate location on the user workspace. |
| 978 | | * Verify that expected data is present on the user workspace. |
| 979 | | * View the data using the iREEL GUI on the user workspace. |
| 980 | | * Perform some analysis on the data located on the user workspace. |
| 981 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 982 | | |
| 983 | | |
| 984 | | ===== GIM-2A-1CN-5 Send Analysis Data to iRODS ===== |
| 985 | | |
| 986 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 987 | | |
| 988 | | '''Prerequisites:''' |
| 989 | | |
| 990 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a static image with GIMI I&M packages installed. |
| 991 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 992 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 993 | | |
| 994 | | '''Procedure:''' |
| 995 | | |
| 996 | | * Locate the analysis results on the user workspace. |
| 997 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 998 | | * Verify that expected results are present on the iRODS server. |
| 999 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 1000 | | * Verify that the expected results are present on the iRODS server. |
| 1001 | | |
| 1002 | | |
| 1003 | | ==== Dynamic Install/Debian ==== |
| 1004 | | |
| 1005 | | ===== GIM-2A-1CN-6 Slice/Sliver Setup ===== |
| 1006 | | |
| 1007 | | This test creates a slice on two ExoGENI aggregates with 3 VMs in one aggregate and 2 VMs in the other aggregate using a Debian image with GIMI I&M packages installed dynamically.[[BR]] |
| 1008 | | One of the VMs in the 3-VM aggregate will be the common (OML server) node and the other two VMs in each aggregate will be measurement points. |
| 1009 | | |
| 1010 | | '''Prerequisites:''' |
| 1011 | | * The ExoGENI AM has made available a Debian image on which to install the GIMI I&M packages. |
| 1012 | | * The GIMI I&M packages are available on a public web server? |
| 1013 | | * The resource allocated for the MC is externally accessible by SSH and HTTP. |
| 1014 | | * The resource allocated for the MC is accessible by all VMs in both aggregates (which ports?) |
| 1015 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. (Is this required for slice set-up?) |
| 1016 | | |
| 1017 | | '''Procedure:''' |
| 1018 | | * Using OMNI, allocate three VMs from one ExoGENI AM and two VMs from the other to a slice. |
| 1019 | | * Install the GIMI I&M packages. |
| 1020 | | * Generate and install necessary certificates on the nodes? |
| 1021 | | * Enable required services (examples?) on the MC and MP nodes. |
| 1022 | | * Verify full connectivity of the slice (ping and ssh) |
| 1023 | | * Verify required services have been enabled |
| 1024 | | |
| 1025 | | ===== GIM-2A-1CN-7 Basic Measurements ===== |
| 1026 | | |
| 1027 | | This case tests basic measurement configuration on the measurement points. ''' Need to be more specific here ''' |
| 1028 | | |
| 1029 | | '''Prerequisites:''' |
| 1030 | | |
| 1031 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 1032 | | * The common node in one of the aggregates is accessible by all MP VMs within the slice (which ports?). |
| 1033 | | * A messaging (XMPP) server is available and accessible by all nodes in the slice. |
| 1034 | | |
| 1035 | | '''Procedure:''' |
| 1036 | | |
| 1037 | | * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC. |
| 1038 | | * Start, Stop, Restart basic measurement services using OMF EC. |
| 1039 | | * Verify that processes are being controlled correctly. |
| 1040 | | * Start basic measurement services. |
| 1041 | | * Verify that all tests/processes are executing successfully. |
| 1042 | | |
| 1043 | | ===== GIM-2A-1CN-8 Send Measurement Data to iRODS ===== |
| 1044 | | |
| 1045 | | This test sends the measurement data collected on the common node to the iRODS server using the iRODS client i-commands. |
| 1046 | | |
| 1047 | | '''Prerequisites:''' |
| 1048 | | |
| 1049 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 1050 | | * Measurement data has been collected on the common node. |
| 1051 | | * The iRODS client has been installed on the common node and configured to use the appropriate iRODS account. |
| 1052 | | |
| 1053 | | '''Procedure:''' |
| 1054 | | |
| 1055 | | * Locate the measurement data on the common node. |
| 1056 | | * Use the i-put command to copy the measurement data to the appropriate location on the iRODS server. |
| 1057 | | * Verify that expected data is present on the iRODS server. |
| 1058 | | * Use irsync to copy data to the appropriate location on the iRODS server. |
| 1059 | | * Verify that the expected data is present on the iRODS server. |
| 1060 | | |
| 1061 | | |
| 1062 | | ===== GIM-2A-1CN-9 Visualize Results ===== |
| 1063 | | |
| 1064 | | This test pulls the collected measurement data from the iRODS server to the user workspace to be analyzed and visualized. |
| 1065 | | |
| 1066 | | '''Prerequisites:''' |
| 1067 | | |
| 1068 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 1069 | | * Measurement data has been sent to the appropriate location on the iRODS server. |
| 1070 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 1071 | | |
| 1072 | | '''Procedure:''' |
| 1073 | | |
| 1074 | | * Locate the measurement data on the iRODS server. |
| 1075 | | * Use the i-get command to copy the measurement data to the appropriate location on the user workspace. |
| 1076 | | * Verify that expected data is present on the user workspace. |
| 1077 | | * View the data using the iREEL GUI on the user workspace. |
| 1078 | | * Perform some analysis on the data located on the user workspace. |
| 1079 | | * View the analysis results using the iREEL GUI on the user workspace. |
| 1080 | | |
| 1081 | | |
| 1082 | | ===== GIM-2A-1CN-10 Send Analysis Data to iRODS ===== |
| 1083 | | |
| 1084 | | This test copies the results of data analysis from the user workspace to the iRODS server. |
| 1085 | | |
| 1086 | | '''Prerequisites:''' |
| 1087 | | |
| 1088 | | * An ExoGENI slice has been created and verified with one common node VM and 4 MP VMs using a Debian image with GIMI I&M packages installed dynamically. |
| 1089 | | * Measurement data on the user workspace has been analyzed to produce analysis results. |
| 1090 | | * The iRODS client has been installed on the user workspace and configured to use the appropriate iRODS account. |
| 1091 | | |
| 1092 | | '''Procedure:''' |
| 1093 | | |
| 1094 | | * Locate the analysis results on the user workspace. |
| 1095 | | * Use the i-put command to copy results to the appropriate location on the iRODS server. |
| 1096 | | * Verify that expected results are present on the iRODS server. |
| 1097 | | * Use irsync to copy results to the appropriate location on the iRODS server. |
| 1098 | | * Verify that the expected results are present on the iRODS server. |
| 1099 | | |
| | 2 | This page has been moved to [wiki:GIMIAcceptanceTests/TestPlan]. |
