Changes between Version 17 and Version 18 of GIMI-GEC16-Tutorials/GIMI-GEC16-TutorialA

Timestamp:

03/18/13 15:42:44 (11 years ago)

Author:

zink@cs.umass.edu

Comment:

--

GIMI-GEC16-Tutorials/GIMI-GEC16-TutorialA

@@ -1 @@
-
+= Combine ExoGENI/GIMI Tutorial at GEC 16 =
 == Description ==
 In this tutorial experimenters will perform SDN/OpenFlow (OF) experiments based on provisioned Layer 2 topologies in ExoGENI and VMs running OVS (which implements OF 1.0, 1.2 and 1.3) that mimic the behavior of hardware-based OF switches. The goal is to learn how to provision a topology, how to attach a controller to it, demonstrate basic packet manipulation capabilities using most likely gui-based tools that use north-bound APIs on floodlight (as an exemplar controller). 
@@ -281 +281 @@
 packet counters increase along the flow path “node1 → node3 → node5” and remain constant along the
 flow path “node5 → node3 → node4 → node2 → node1 → node0”. [[BR]]
-     
+
+= LabWiki =
+
+After the ExoGENI slice has been created and the flows in the topology are appropriately configured we will now use
+the GIMI tools to perform a measurement on top of this slice.
+
+To Perform this measurement we will make use of LabWiki. 
+
+A tutorial on how to use LabWiki for measurements can be found [http://groups.geni.net/geni/wiki/GIMI-GEC16-Tutorials/GIMI-GEC16-TutorialB/Observe here].
+In addition, we have created a [http://emmy9.casa.umass.edu/GEC16-GIMI-Tutorial/Labwiki-gec15.mp4 video] that demonstrates the usage of Labwiki.
+
 
 [[Image(Figure19a_openflow.png)]][[BR]]