Changes between Version 32 and Version 33 of GENIWiMaxTridentcomTutorial
- Timestamp:
- 07/12/12 15:11:22 (12 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIWiMaxTridentcomTutorial
v32 v33 44 44 Participants will learn how to begin an experiment with a "fresh slate" by loading a new disk image onto their nodes and resetting the WiMAX base station to its default state.[[br]] 45 45 46 [ Demo #3] [[BR]]46 [ Demo ] [[BR]] 47 47 48 [http://witestlab.poly.edu/index.php/tutorial s/27-starting-an-experiment.htmlInstructions #3][[br]]48 [http://witestlab.poly.edu/index.php/tutorial.html?start=3 Instructions #3][[br]] 49 49 50 50 This requires coordination between different teams using the same BS, since only one team should reset a given BS at a time. … … 58 58 Participants will run a simple OMF experiment in which two nodes are configured to connect to the GENI WiMAX network and their WiMAX RSSI and CINR is stored by OML and plotted on the web interface during experiment runtime. They also learn how to use the ''result'' service of the AM. [[br]] 59 59 60 [ Demo #4] [[BR]]60 [ Demo ] [[BR]] 61 61 62 [http://witestlab.poly.edu/index.php/tutorial s/28-4-basic-wimax-rssi-experiment.htmlInstructions #4][[br]]62 [http://witestlab.poly.edu/index.php/tutorial.html?start=4 Instructions #4][[br]] 63 63 64 64 (Since several users will be running experiments on the same AM in parallel, not all users will find their web interface at port 4000.) [[br]] … … 74 74 Participants will extend the previous simple experiment. Each of their nodes will be assigned an IP address and will listen for UDP traffic from a broadcast sender, using iperf. The iperf bandwidth and packet loss will be plotted on the web interface. [[br]] 75 75 76 [ Demo #5] [[BR]]76 [ Demo ] [[BR]] 77 77 78 [http://witestlab.poly.edu/index.php/tutorial s/29-5-iperf-udp-broadcast-receiver-experiment.htmlInstructions #5][[br]]78 [http://witestlab.poly.edu/index.php/tutorial.html?start=5 Instructions #5][[br]] 79 79 80 80 This experiment does not require coordination between different teams using the same BS.[[BR]] … … 88 88 Participants will run an OML-ized script that retrieve the WiMAX BS config and stores it in an OML database. [[br]] 89 89 90 [ Demo #6] [[BR]]90 [ Demo ] [[BR]] 91 91 92 [http://witestlab.poly.edu/index.php/tutorial s/31-6-saving-bs-config-to-oml.htmlInstructions #6][[br]]92 [http://witestlab.poly.edu/index.php/tutorial.html?start=6 Instructions #6][[br]] 93 93 94 94 This experiment does not require coordination between different teams using the same BS. … … 102 102 Participants will run an OMF experiment that turns off adaptive modulation and coding, then varies the MCS used at regular intervals during experiment runtime. Participants can see the effect of varying MCS by observing the packet loss graph shown in the web interface. [[br]] 103 103 104 [ Demo #7] [[BR]]104 [ Demo ] [[BR]] 105 105 106 [http://witestlab.poly.edu/index.php/tutorial s/30-7-varying-modulation-and-coding-experiment.htmlInstructions #7][[br]]106 [http://witestlab.poly.edu/index.php/tutorial.html?start=7 Instructions #7][[br]] 107 107 108 108 This experiment requires coordination between different teams using the same BS. Only one team should change the BS settings at a time.
