Changes between Version 16 and Version 17 of GENIWiMaxTridentcomTutorial

Timestamp:

06/11/12 05:03:58 (12 years ago)

Author:

hmussman@bbn.com

Comment:

--

GENIWiMaxTridentcomTutorial

@@ -46 +46 @@
 
 
-== 2.  Starting an experiment ==
+== 4.  Starting an experiment ==
 
 '''Aim:''' Learn how to reset a GENI WiMAX testbed to a usable state before starting an experiment.
@@ -62 +62 @@
  * For the sake of consistency, we will use a common image name for every testbed - '''wmx-tutorial.ndz'''. Make sure this image is installed in the appropriate location
 
-== 3.  Basic WiMAX RSSI Experiment ==
+
+== 5.  Basic WiMAX RSSI experiment ==
 
 '''Aim:''' Learn how to run a simple OMF experiment, connect to GENI WiMAX using OMF, and view captured data during and after the experiment.
@@ -80 +81 @@
  * The result service should be accessible from the public Internet. If the address of the result service is different from the address that participants SSH into, note this address together with the credentials.
 
-== 4.  Iperf UDP Broadcast Receiver ==
+== 6.  Iperf UDP broadcast receiver experiment ==
 
 '''Aim:''' Learn how to send/receive traffic over the WiMAX link.
@@ -98 +99 @@
 
 
-== 5.  Saving BS Config to OML ==
+== 7.  Saving BS Config to OML ==
 
 '''Aim:''' Learn how to retrieve and examine WiMAX BS configuration.
@@ -112 +113 @@
 
 
-== 6.  Varying Modulation and Coding ==
+== 8.  Varying modulation and coding ==
 
 '''Aim:''' Learn how to change the configuration on a GENI WiMAX BS.
@@ -127 +128 @@
  
 
-== 7.  Multisite Demo ==
+== 9.  Multisite demo ==
 
 TBD