Changes between Version 2 and Version 3 of GENIStitch-GENI-Status-Report-GEC19


Ignore:
Timestamp:
04/17/14 20:28:24 (10 years ago)
Author:
tlehman@maxgigapop.net
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIStitch-GENI-Status-Report-GEC19

    v2 v3  
    4040
    4141Status:
    42 We have upgraded a development instance of the MAX Aggregate Manager software to support the version of PlanetLab SFA (v3.x.x) software that includes GENI AM APIv3.  This required an upgrade of the base Fedora OS, and required some adaptations of the MAX Aggregate Manager software as well.   These changes do enable the MAX AM to support the GENI AM APIv3.  However, the SFA AM APIv3 is not backward compatible with the GENI AM APIv2 version.  As a result we will likely need to run two instances of the GENI AM API during a transition period.  This needs to be discussed further.  In addition, we are also evaluating the possibility of switching to be FOAM based as opposed to SFA.
     42We have upgraded a development instance of the MAX Aggregate Manager software to support the version of !PlanetLab SFA (v3.x.x) software that includes GENI AM APIv3.  This required an upgrade of the base Fedora OS, and required some adaptations of the MAX Aggregate Manager software as well.   These changes do enable the MAX AM to support the GENI AM APIv3.  However, the SFA AM APIv3 is not backward compatible with the GENI AM APIv2 version.  As a result we will likely need to run two instances of the GENI AM API during a transition period.  This needs to be discussed further.  In addition, we are also evaluating the possibility of switching to be FOAM based as opposed to SFA.
    4343
    4444__''GENIStitch.S5.b: GENIStitch.S5b: Extend RSpec Enhancements and SCS to support the extended stitching capabilities. Demonstrate multi-aggregate, multi-point, multi-path stitching capabilities at GEC20. Deliver revised architecture and design document to the GENI Project Manager one week prior to GEC20.''__[[BR]]