wiki:GENIRacksHome/USIgniteInstageniRacks/ConfirmationTestStatus/UTD-IGN

Version 34 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

University of Texas at Dallas InstaGENI US Ignite Confirmation Tests

Test Plan details for IG-CT-XX at InstaGENI Confirmation Tests and for IG-ST-XX at GENI Network Stitching Confirmation Tests .

For site overall test status see the InstaGENI New Site Confirmation Tests Status page.

Note: Omni nick_names for site aggregates used for these tests are:

utdallas-ig=urn:publicid:IDN+instageni.utdallas.edu+authority+cm,https://instageni.utdallas.edu:12369/protogeni/xmlrpc/am/2.0

IG-CT-1 - Access to New Site VM resources

Aggregate Version:

$ omni getversion -a utdallas-ig

The InstaGENI version in "'code_tag':'a4dcba972ec27a89499cbe5500ed6d071a854551'" is the same as the other InstaGENI US Ignite sites:

Site InstaGENI Code tag
louisiana-edu a4dcba972ec27a89499cbe5500ed6d071a854551
utdallas-edu a4dcba972ec27a89499cbe5500ed6d071a854551
uvm-edu a4dcba972ec27a89499cbe5500ed6d071a854551

Get list of "available" compute resources:

$ omni -a utdallas-ig listresources --available -o

Verified that Advertisement RSpec only includes available resources, as requested:

$ egrep "node comp|available now" rspec-instageni-utdallas-edu.xml 
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="procurve2"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+procurve2"  exclusive="true" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="pc4"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc4"  exclusive="true" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="pc1"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc1"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="pc2"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc2"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="interconnect-al2s"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+interconnect-al2s"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="pc3"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc3"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="pc5"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc5"  exclusive="true" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" component_name="internet"  component_id="urn:publicid:IDN+instageni.utdallas.edu+node+internet"  exclusive="true" >
  <available now="true" />

Created a slice and a 4 VMs sliver using the RSpec IG-CT-1.rspec:

$ stitcher createsliver -a utdallas-ig IG-CT-1 IG-CT-1.rspec
09:22:30 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:22:30 INFO    : Not a bound multi-aggregate request - let Omni handle this.
09:22:30 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
09:22:30 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
09:22:30 INFO    : Using control framework portal
09:22:30 INFO    : Member Authority is https://ch.geni.net/MA (from config)
09:22:30 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
09:22:30 INFO    : Substituting AM nickname utdallas-ig with URL https://instageni.utdallas.edu:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.utdallas.edu+authority+cm
09:22:30 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1 expires on 2017-05-16 13:18:22 UTC
09:22:30 INFO    : Creating sliver(s) from rspec file IG-CT-1.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1
09:22:52 INFO    :  (PG log url - look here for details on any failures: https://www.instageni.utdallas.edu/spewlogfile.php3?logfile=2020436c5409993315d8b3185462f9b0)
09:22:52 INFO    : Got return from CreateSliver for slice IG-CT-1 at utdallas-ig:
09:22:52 INFO    : <?xml version="1.0" ?>
09:22:52 INFO    :   <!-- Reserved resources for:
	Slice: IG-CT-1
	at AM:
	URN: urn:publicid:IDN+instageni.utdallas.edu+authority+cm
	URL: https://instageni.utdallas.edu:12369/protogeni/xmlrpc/am/2.0
 -->
09:22:52 INFO    :   <rspec expires="2017-05-16T13:18:22Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd">    

    <node client_id="xen1" component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc3" component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+18">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc3.instageni.utdallas.edu" port="25010" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc3.instageni.utdallas.edu" port="25010" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc3.instageni.utdallas.edu" port="25010" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc3.instageni.utdallas.edu" port="25010" username="lnevers"/>      <rs:console server="pc3.instageni.utdallas.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen1:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc3:eth1" mac_address="02e5b9466d3b" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+23">      
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm3-1" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen1.IG-CT-1.ch-geni-net.instageni.utdallas.edu"/>  </node>  
    <node client_id="xen2" component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc2" component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+19">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25010" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25010" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25010" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25010" username="lnevers"/>      <rs:console server="pc2.instageni.utdallas.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen2:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc2:eth1" mac_address="021f5442d698" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+24">      
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm2-1" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen2.IG-CT-1.ch-geni-net.instageni.utdallas.edu"/>  </node>  
    <node client_id="xen3" component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc2" component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+20">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25011" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25011" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25011" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc2.instageni.utdallas.edu" port="25011" username="lnevers"/>      <rs:console server="pc2.instageni.utdallas.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen3:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc2:eth1" mac_address="02c150400cf7" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+25">      
            <ip address="192.168.1.3" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm2-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen3.IG-CT-1.ch-geni-net.instageni.utdallas.edu"/>  </node>  
    <node client_id="xen4" component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc1" component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+17">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25010" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25010" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25010" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25010" username="lnevers"/>      <rs:console server="pc1.instageni.utdallas.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen4:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc1:eth1" mac_address="02c62925c8ba" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+26">      
            <ip address="192.168.1.4" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm1-1" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen4.IG-CT-1.ch-geni-net.instageni.utdallas.edu"/>  </node>  
    <link client_id="lan0" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+22" vlantag="259">    
        <component_manager name="urn:publicid:IDN+instageni.utdallas.edu+authority+cm"/>    
        <interface_ref client_id="xen1:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc3:eth1" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+23"/>    
        <interface_ref client_id="xen2:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc2:eth1" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+24"/>    
        <interface_ref client_id="xen3:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc2:eth1" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+25"/>    
        <interface_ref client_id="xen4:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+26"/>    
        <link_type name="lan"/>    
    </link>  
  <rs:site_info xmlns:rs="http://www.protogeni.net/resources/rspec/ext/site-info/1">    <rs:location country="US" latitude="32.99473" longitude="-96.75258"/>  </rs:site_info></rspec>
09:22:52 INFO    : Reservation at utdallas-ig in slice IG-CT-1 expires at 2017-05-16 13:18:22 (UTC).
Got Reserved resources RSpec from instageni-utdallas-edu. Reservation at utdallas-ig in slice IG-CT-1 expires at 2017-05-16 13:18:22 (UTC).

The following is login information for the sliver:

$ readyToLogin -a utdallas-ig IG-CT-1
<...>
xen4's geni_status is: ready 
User lnevers logs in to xen4 using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utdallas.edu

xen3's geni_status is: ready 
User lnevers logs in to xen3 using:
	ssh -p 25011  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.utdallas.edu

xen2's geni_status is: ready 
User lnevers logs in to xen2 using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.utdallas.edu

xen1's geni_status is: changing 
User lnevers logs in to xen1 using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.utdallas.edu

Measurements

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

Iperf InstaGENI UTDallas VM-2 to VM-1 (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   687 MBytes  96.0 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec   119 MBytes  16.7 Mbits/sec
[  4]  0.0-60.2 sec   112 MBytes  15.7 Mbits/sec
[  7]  0.0-60.2 sec   169 MBytes  23.5 Mbits/sec
[  3]  0.0-60.5 sec   104 MBytes  14.5 Mbits/sec
[  6]  0.0-60.6 sec   195 MBytes  27.0 Mbits/sec
[SUM]  0.0-60.6 sec   699 MBytes  96.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  9]  0.0-60.1 sec  63.4 MBytes  8.85 Mbits/sec
[  3]  0.0-60.1 sec  73.2 MBytes  10.2 Mbits/sec
[  6]  0.0-60.2 sec  69.9 MBytes  9.74 Mbits/sec
[ 12]  0.0-60.2 sec  60.5 MBytes  8.43 Mbits/sec
[  5]  0.0-60.3 sec  75.4 MBytes  10.5 Mbits/sec
[  4]  0.0-60.3 sec  76.0 MBytes  10.6 Mbits/sec
[  8]  0.0-60.5 sec  67.1 MBytes  9.31 Mbits/sec
[ 11]  0.0-60.5 sec  66.8 MBytes  9.25 Mbits/sec
[ 10]  0.0-60.5 sec  66.2 MBytes  9.18 Mbits/sec
[  7]  0.0-60.6 sec  76.1 MBytes  10.5 Mbits/sec
[SUM]  0.0-60.6 sec   695 MBytes  96.2 Mbits/sec

Iperf InstaGENI UTDallas VM-2 to the VM-1 (UDP) - UDP buffer size: 208.0 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512819 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   688 MBytes  96.2 Mbits/sec   0.016 ms 22118/512818 (4.3%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI UTDallas VM-2 to the VM-1

60 packets transmitted, 60 received, 0% packet loss, time 59001ms
rtt min/avg/max/mdev = 0.519/0.643/5.524/0.636 ms

IG-CT-2 - Access to New Site bare metal and VM resources

Created a slice and a sliver with one VM and one Raw PC using RSpec IG-CT-2.rspec

$ stitcher createsliver -a utdallas-ig IG-CT-2 IG-CT-2.rspec
09:55:54 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:55:54 INFO    : Not a bound multi-aggregate request - let Omni handle this.
09:55:54 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
09:55:54 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
09:55:54 INFO    : Using control framework portal
09:55:54 INFO    : Member Authority is https://ch.geni.net/MA (from config)
09:55:54 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
09:55:54 INFO    : Substituting AM nickname utdallas-ig with URL https://instageni.utdallas.edu:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.utdallas.edu+authority+cm
09:55:55 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2 expires on 2017-05-16 13:54:59 UTC
09:55:55 INFO    : Creating sliver(s) from rspec file IG-CT-2.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2
09:56:15 INFO    :  (PG log url - look here for details on any failures: https://www.instageni.utdallas.edu/spewlogfile.php3?logfile=0dcb4fb09a46c55a81a7b08e4feabbe9)
09:56:15 INFO    : Got return from CreateSliver for slice IG-CT-2 at utdallas-ig:
09:56:15 INFO    : <?xml version="1.0" ?>
09:56:15 INFO    :   <!-- Reserved resources for:
	Slice: IG-CT-2
	at AM:
	URN: urn:publicid:IDN+instageni.utdallas.edu+authority+cm
	URL: https://instageni.utdallas.edu:12369/protogeni/xmlrpc/am/2.0
 -->
09:56:15 INFO    :   <rspec expires="2017-05-16T13:54:59Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd">    

   <node client_id="VM" component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc1" component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+27">    
        <sliver_type name="emulab-xen"/>    
        <interface client_id="VM:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc1:eth1" mac_address="02bdb746b0c7" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+31">      
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm1-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM.IG-CT-2.ch-geni-net.instageni.utdallas.edu"/>    <services>      <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25042" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25042" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25042" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc1.instageni.utdallas.edu" port="25042" username="lnevers"/>      <rs:console server="pc1.instageni.utdallas.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>  </node>  
    <node client_id="PC" component_id="urn:publicid:IDN+instageni.utdallas.edu+node+pc5" component_manager_id="urn:publicid:IDN+instageni.utdallas.edu+authority+cm" exclusive="true" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+28">    
       <sliver_type name="raw-pc"> </sliver_type>    
        <interface client_id="PC:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc5:eth1" mac_address="02742eda5a90" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+32">      
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="dl360" name="pc5" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host ipv4="129.110.253.17" name="PC.IG-CT-2.ch-geni-net.instageni.utdallas.edu"/>    <services>      <login authentication="ssh-keys" hostname="pc5.instageni.utdallas.edu" port="22" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc5.instageni.utdallas.edu" port="22" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc5.instageni.utdallas.edu" port="22" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc5.instageni.utdallas.edu" port="22" username="lnevers"/>    </services>  </node>  
    <link client_id="lan0" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+30" vlantag="260">    
        <component_manager name="urn:publicid:IDN+instageni.utdallas.edu+authority+cm"/>    
        <interface_ref client_id="VM:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+31"/>    
        <interface_ref client_id="PC:if0" component_id="urn:publicid:IDN+instageni.utdallas.edu+interface+pc5:eth1" sliver_id="urn:publicid:IDN+instageni.utdallas.edu+sliver+32"/>    
        <link_type name="lan"/>    
    </link>  
  <rs:site_info xmlns:rs="http://www.protogeni.net/resources/rspec/ext/site-info/1">    <rs:location country="US" latitude="32.99473" longitude="-96.75258"/>  </rs:site_info></rspec>
09:56:15 INFO    : Reservation at utdallas-ig in slice IG-CT-2 expires at 2017-05-16 13:54:59 (UTC).
Got Reserved resources RSpec from instageni-utdallas-edu. Reservation at utdallas-ig in slice IG-CT-2 expires at 2017-05-16 13:54:59 (UTC).

Determined login information:

$ readyToLogin -a utdallas-ig IG-CT-2
<...>
PC's geni_status is: ready 
User lnevers logs in to PC using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.utdallas.edu

VM's geni_status is: ready 
User lnevers logs in to VM using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utdallas.edu

Measurements

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

Iperf InstaGENI UTDallas PC to VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   686 MBytes  95.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   158 MBytes  22.0 Mbits/sec
[  3]  0.0-60.0 sec   122 MBytes  17.0 Mbits/sec
[  7]  0.0-60.1 sec   124 MBytes  17.3 Mbits/sec
[  5]  0.0-60.1 sec   164 MBytes  22.9 Mbits/sec
[  6]  0.0-60.1 sec   119 MBytes  16.6 Mbits/sec
[SUM]  0.0-60.1 sec   687 MBytes  95.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  68.8 MBytes  9.60 Mbits/sec
[  6]  0.0-60.1 sec  68.8 MBytes  9.60 Mbits/sec
[  4]  0.0-60.1 sec  68.8 MBytes  9.60 Mbits/sec
[  8]  0.0-60.1 sec  68.8 MBytes  9.60 Mbits/sec
[ 12]  0.0-60.2 sec  68.9 MBytes  9.60 Mbits/sec
[ 10]  0.0-60.2 sec  68.8 MBytes  9.58 Mbits/sec
[  7]  0.0-60.2 sec  68.8 MBytes  9.58 Mbits/sec
[  3]  0.0-60.2 sec  68.8 MBytes  9.58 Mbits/sec
[  9]  0.0-60.2 sec  68.8 MBytes  9.58 Mbits/sec
[ 11]  0.0-60.2 sec  68.8 MBytes  9.58 Mbits/sec
[SUM]  0.0-60.2 sec   688 MBytes  95.8 Mbits/sec

Iperf InstaGENI UTDallas PC to the VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   693 MBytes  96.9 Mbits/sec
[  3] Sent 494182 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   693 MBytes  96.8 Mbits/sec   0.005 ms  124/494181 (0.025%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI UTDallas PC to VM

60 packets transmitted, 60 received, 0% packet loss, time 59000ms
rtt min/avg/max/mdev = 0.332/0.373/0.584/0.039 ms

Iperf InstaGENI UTDallas VM to PC (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   686 MBytes  95.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec   136 MBytes  19.0 Mbits/sec
[  3]  0.0-60.0 sec   139 MBytes  19.4 Mbits/sec
[  7]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec
[  5]  0.0-60.1 sec   138 MBytes  19.2 Mbits/sec
[  4]  0.0-60.1 sec   132 MBytes  18.5 Mbits/sec
[SUM]  0.0-60.1 sec   685 MBytes  95.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-59.1 sec  67.1 MBytes  9.53 Mbits/sec
[ 10]  0.0-59.1 sec  68.4 MBytes  9.70 Mbits/sec
[ 11]  0.0-59.1 sec  70.4 MBytes  9.98 Mbits/sec
[ 12]  0.0-59.2 sec  66.6 MBytes  9.44 Mbits/sec
[  5]  0.0-59.2 sec  68.5 MBytes  9.71 Mbits/sec
[  7]  0.0-59.2 sec  68.5 MBytes  9.71 Mbits/sec
[  8]  0.0-59.2 sec  67.2 MBytes  9.53 Mbits/sec
[  9]  0.0-59.3 sec  68.8 MBytes  9.73 Mbits/sec
[  4]  0.0-60.0 sec  69.1 MBytes  9.66 Mbits/sec
[  3]  0.0-60.1 sec  70.1 MBytes  9.79 Mbits/sec
[SUM]  0.0-60.1 sec   685 MBytes  95.6 Mbits/sec

Iperf InstaGENI UTDallas VM to the PC (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512813 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   695 MBytes  97.1 Mbits/sec   0.028 ms 17328/512812 (3.4%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI UTDallas VM to PC

60 packets transmitted, 60 received, 0% packet loss, time 58997ms
rtt min/avg/max/mdev = 0.309/0.334/0.388/0.026 ms

IG-CT-3 - Multiple sites experiment

Created a slice and a sliver with one VM at UTDallas and one VMi at GPO using RSpec IG-CT-3.rspec. Used stitcher to create both the UTDallas and GPO slivers:

$ stitcher createsliver IG-CT-3c IG-CT-3.rspec 
10:38:51 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
10:38:51 INFO    : Reading slice IG-CT-3c credential...
10:38:51 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-3c expires on 2017-05-16 14:38:51 UTC
10:38:51 INFO    : Multi-AM reservation will include resources from these aggregates:
10:38:51 INFO    : 	<Aggregate utdallas-ig>
10:38:51 INFO    : 	<Aggregate nysernet-ig>
10:38:51 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
10:39:11 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
10:39:11 INFO    : Stitcher doing createsliver at <Aggregate nysernet-ig>...
10:39:46 INFO    : ... Allocation at <Aggregate nysernet-ig> complete.
10:39:46 INFO    : All aggregates are complete.
10:39:46 INFO    : Your resources expire at 2017-05-15T14:28:51 (UTC). 
10:39:46 INFO    : Saved combined reservation RSpec at 2 AM(s) to file '/home/lnevers/gcf-test/instarspec/UTDallas/IG-CT-3c-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-CT-3c at 2 Aggregates, creating 1 GRE link(s).10:38:51 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
10:38:51 INFO    : Reading slice IG-CT-3c credential...
10:38:51 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-3c expires on 2017-05-16 14:38:51 UTC
10:38:51 INFO    : Multi-AM reservation will include resources from these aggregates:
10:38:51 INFO    : 	<Aggregate utdallas-ig>
10:38:51 INFO    : 	<Aggregate nysernet-ig>
10:38:51 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
10:39:11 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
10:39:11 INFO    : Stitcher doing createsliver at <Aggregate nysernet-ig>...
10:39:46 INFO    : ... Allocation at <Aggregate nysernet-ig> complete.
10:39:46 INFO    : All aggregates are complete.
10:39:46 INFO    : Your resources expire at 2017-05-15T14:28:51 (UTC). 
10:39:46 INFO    : Saved combined reservation RSpec at 2 AM(s) to file '/home/lnevers/gcf-test/instarspec/UTDallas/IG-CT-3c-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-CT-3c at 2 Aggregates, creating 1 GRE link(s).

Determined login information at each UTDallas and GPO aggregate:

$ readyToLogin IG-CT-3c --useSliceAggregates
ig-utd's geni_status is: ready 
User lnevers logs in to ig-utd using:
	ssh -p 25074  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.utdallas.edu

ig-nyse's geni_status is: ready 
User lnevers logs in to ig-nyse using:
	ssh -p 25170  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.nysernet.org

Measurements

Iperf InstaGENI GPO VM to UTDallas VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   236 GBytes  33.8 Gbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  50.3 GBytes  7.19 Gbits/sec
[  3]  0.0-60.0 sec  49.6 GBytes  7.10 Gbits/sec
[  4]  0.0-60.0 sec  50.0 GBytes  7.16 Gbits/sec
[  5]  0.0-60.0 sec  50.6 GBytes  7.25 Gbits/sec
[  6]  0.0-60.0 sec  50.4 GBytes  7.21 Gbits/sec
[SUM]  0.0-60.0 sec   251 GBytes  35.9 Gbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  19.4 GBytes  2.78 Gbits/sec
[  3]  0.0-60.0 sec  19.3 GBytes  2.76 Gbits/sec
[  6]  0.0-60.0 sec  19.6 GBytes  2.80 Gbits/sec
[ 10]  0.0-60.0 sec  19.4 GBytes  2.78 Gbits/sec
[  7]  0.0-60.0 sec  19.5 GBytes  2.79 Gbits/sec
[  8]  0.0-60.0 sec  19.6 GBytes  2.81 Gbits/sec
[  9]  0.0-60.0 sec  19.5 GBytes  2.79 Gbits/sec
[ 11]  0.0-60.0 sec  19.4 GBytes  2.78 Gbits/sec
[ 12]  0.0-60.0 sec  19.4 GBytes  2.78 Gbits/sec
[  5]  0.0-60.0 sec  18.4 GBytes  2.63 Gbits/sec
[SUM]  0.0-60.0 sec   194 GBytes  27.7 Gbits/sec

Iperf InstaGENI GPO VM to UTDallas VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth        Jitter   Lost/Total Datagrams
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec   0.001 ms    0/512771 (0%)
[  3] Sent 512772 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec   0.000 ms    0/512771 (0%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the UTDallas VM

60 packets transmitted, 60 received, 0% packet loss, time 58999ms
rtt min/avg/max/mdev = 0.022/0.022/0.035/0.006 ms

Iperf InstaGENI UTDallas VM to GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   534 MBytes  74.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.1 sec   159 MBytes  22.2 Mbits/sec
[  5]  0.0-60.2 sec  78.5 MBytes  10.9 Mbits/sec
[  3]  0.0-60.2 sec  93.0 MBytes  13.0 Mbits/sec
[  6]  0.0-60.2 sec   177 MBytes  24.7 Mbits/sec
[  7]  0.0-60.2 sec   147 MBytes  20.5 Mbits/sec
[SUM]  0.0-60.2 sec   655 MBytes  91.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  75.0 MBytes  10.5 Mbits/sec
[  7]  0.0-60.1 sec  50.0 MBytes  6.98 Mbits/sec
[  5]  0.0-60.1 sec  51.1 MBytes  7.13 Mbits/sec
[ 11]  0.0-60.2 sec  48.4 MBytes  6.74 Mbits/sec
[ 12]  0.0-60.2 sec  65.1 MBytes  9.08 Mbits/sec
[  4]  0.0-60.2 sec  66.0 MBytes  9.19 Mbits/sec
[  8]  0.0-60.2 sec  64.5 MBytes  8.98 Mbits/sec
[ 10]  0.0-60.3 sec  90.5 MBytes  12.6 Mbits/sec
[  9]  0.0-60.4 sec  44.8 MBytes  6.22 Mbits/sec
[  6]  0.0-60.5 sec   101 MBytes  14.0 Mbits/sec
[SUM]  0.0-60.5 sec   656 MBytes  90.9 Mbits/sec

Iperf InstaGENI UTDallas VM to GPO VM (UDP) - 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512809 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   567 MBytes  79.2 Mbits/sec   0.116 ms 108517/512808 (21%)
[  3]  0.0-60.0 sec  4 datagrams received out-of-order

Ping from InstaGENI UTDallas VM to GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59066ms
rtt min/avg/max/mdev = 77.169/77.330/77.556/0.127 ms

IG-CT-4 - Multiple sites OpenFlow experiment and interoperability

Meso-scale no longer supported, see Stitching OpenFlow test IG-ST-6 status.

IG-CT-5 - Experiment Monitoring

GENI Monitoring

Check for site's compute aggregate availability and External Checks for site aggregates:

Check for status for one of the site VM Servers:

Check for status of GPO Check for Stitching:

IG-CT-6 - Administrative Tests

Sent request for administrative account to site contact from the UTDallas InstaGENI aggregate page. Followed instructions at the InstaGENI Administration page for account request. A local administrator account was requested by joining the emulab-ops group at https://www.instageni.utdallas.edu/joinproject.php3. Once the administrative account was approved and the membership to emulab-ops was granted, proceeded to execute administrative tests.

LNM:~$ ssh control.instageni.utdallas.edu
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-117-generic x86_64)

 * Documentation:  https://help.ubuntu.com/

  System information as of Mon May 15 19:19:23 UTC 2017

  System load:     0.0               IP address for xenbr0: 129.110.253.3
  Usage of /:      25.2% of 5.65GB   IP address for xenbr1: 10.1.1.254
  Memory usage:    1%                IP address for xenbr2: 10.2.1.254
  Swap usage:      0%                IP address for xenbr3: 10.3.1.254
  Processes:       388               IP address for tun0:   10.8.0.1
  Users logged in: 0

  Graph this data and manage this system at:
    https://landscape.canonical.com/
New release '16.04.2 LTS' available.
Run 'do-release-upgrade' to upgrade to it.

Last login: Mon May 15 19:19:24 2017 from 128.89.73.1
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

lnevers@utdallas:~$ sudo whoami
root
lnevers@utdallas:~$ uname -a
Linux utdallas.control-nodes.geniracks.net 3.13.0-117-generic #164-Ubuntu SMP Fri Apr 7 11:05:26 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
lnevers@utdallas:~$ 
lnevers@utdallas:~$ cat /etc/issue
Ubuntu 14.04.5 LTS \n \l
lnevers@utdallas:~$ 

Also access the boss node:

LNM:~$ ssh boss.instageni.utdallas.edu
Last login: Mon May 15 14:18:52 2017 from 128.89.73.1
FreeBSD 10.2-RELEASE-p28 (TESTBED-GENERIC-IB) #0: Mon Apr  3 10:24:14 MDT 2017

Welcome to FreeBSD!

Simple tcsh prompt: set prompt = '%# '
lnevers@boss:~ % sudo whoami
root
lnevers@boss:~ %  uname -a
FreeBSD boss.instageni.utdallas.edu 10.2-RELEASE-p28 FreeBSD 10.2-RELEASE-p28 #0: Mon Apr  3 10:24:14 MDT 2017     root@node.freebsd102-64.emulab-ops.emulab.net:/usr/obj/usr/src/sys/TESTBED-GENERIC-IB  amd64
lnevers@boss:~ % 

From boss node accessed each of the experiment nodes that support VMs:

[lnevers@boss ~]$ for i in pc1 pc2 pc3; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done
Warning: Permanently added 'pc1.instageni.utdallas.edu' (RSA) to the list of known hosts.
===> Host: vhost1.shared-nodes.emulab-ops.instageni.utdallas.edu
root
Linux vhost1.shared-nodes.emulab-ops.instageni.utdallas.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Warning: Permanently added 'pc2.instageni.utdallas.edu' (RSA) to the list of known hosts.
===> Host: vhost2.shared-nodes.emulab-ops.instageni.utdallas.edu
root
Linux vhost2.shared-nodes.emulab-ops.instageni.utdallas.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Warning: Permanently added 'pc3.instageni.utdallas.edu' (RSA) to the list of known hosts.
===> Host: vhost3.shared-nodes.emulab-ops.instageni.utdallas.edu
root
Linux vhost3.shared-nodes.emulab-ops.instageni.utdallas.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

[lnevers@boss ~]$ 

In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pc4 and pc5):

[lnevers@boss ~]$ for i in pc4 pc5 ; do sudo ssh $i "echo -n '===> Host: ';hostname;whoami;uname -a;echo"; done 
===> Host: pc2.ln2pc.ch-geni-net.instageni.utdallas.edu
root
Linux pc2.ln2pc.ch-geni-net.instageni.utdallas.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

===> Host: pc.ln2pc.ch-geni-net.instageni.utdallas.edu
root
Linux pc.ln2pc.ch-geni-net.instageni.utdallas.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

[lnevers@boss ~]$ 

Further verified access by ssh from ops.instageni.gpolab.bbn.com to boss.instageni.gpolab.bbn.com, which is usually restricted for non-admin users:

LNM:~$ ssh ops.instageni.utdallas.edu

Access infrastructure switches using documented password. First connect to the switch named procurve1 the control network switch:

[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
xxxxxxxxx
[lnevers@boss ~]$ sudo ssh procurve1
We'd like to keep you up to date about:
  * Software feature updates
  * New product announcements
  * Special events
Please register your products now at:  www.hpe.com/networking/register


Aruba JL071A 3810M-24G-1-slot Switch
Software revision KB.16.02.0018

 (C) Copyright 2017 Hewlett Packard Enterprise Development LP

                      RESTRICTED RIGHTS LEGEND
 Confidential computer software. Valid license from Hewlett Packard Enterprise
 Development LP required for possession, use or copying. Consistent with FAR
 12.211 and 12.212, Commercial Computer Software, Computer Software
 Documentation, and Technical Data for Commercial Items are licensed to the
 U.S. Government under vendor's standard commercial license.

Press any key to continue

Aruba-3810M-24G-1-slot# show version
Image stamp:    /ws/swbuildm/rel_spokane_qaoff/code/build/bom(swbuildm_rel_spokane_qaoff_rel_spokane)
                Mar 30 2017 09:10:47
                KB.16.02.0018
                526
Boot Image:     Primary

Boot ROM Version:    KB.16.01.0008
Active Boot ROM:     Primary

Aruba-3810M-24G-1-slot# show vlan 

 Status and Counters - VLAN Information

  Maximum VLANs to support : 256                  
  Primary VLAN : DEFAULT_VLAN     
  Management VLAN : control-hardware 

  VLAN ID Name                             | Status     Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1       DEFAULT_VLAN                     | Port-based No    No   
  10      control-hardware                 | Port-based No    No   
  11      control-alternate                | Port-based No    No   
 

Aruba-3810M-24G-1-slot# show running-config 

Running configuration:

; JL071A Configuration Editor; Created on release #KB.16.02.0018
; Ver #10:08.01.81.b3.ff.7c.59.fc.7b.ff.ff.fc.ff.ff.3f.ef:5a

hostname "Aruba-3810M-24G-1-slot"
module 1 type jl071x
flexible-module A type JL083A
telnet-server listen data
no web-management
web-management listen data
ip default-gateway 10.1.1.254
ip ssh listen data
interface A4
   speed-duplex auto-10g
   exit
snmp-server community "xxxx" unrestricted
snmp-server listen data
aaa authentication ssh login public-key
aaa authentication ssh enable public-key
oobm
   disable
   ip address dhcp-bootp
   exit
vlan 1
   name "DEFAULT_VLAN"
   no untagged 18-19
   untagged 1-17,20-24,A1-A4
   ip address 10.254.254.253 255.255.255.0
   ip igmp
   exit
vlan 10
   name "control-hardware"
   untagged 18
   ip address 10.1.1.253 255.255.255.0
   exit
vlan 11
   name "control-alternate"
   untagged 19
   ip address 10.2.1.253 255.255.255.0
   exit
management-vlan 10
allow-unsupported-transceiver
no tftp server
tftp server listen data
no autorun
no dhcp config-file-update
no dhcp image-file-update
device-profile name "default-ap-profile"
   cos 0
   exit
activate provision disable
password xxxx
password xxxx

Aruba-3810M-24G-1-slot# 


Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password:

[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
xxxxxxx
[lnevers@boss ~]$ sudo ssh procurve2
We'd like to keep you up to date about:
  * Software feature updates
  * New product announcements
  * Special events
Please register your products now at:  www.hpe.com/networking/register


manager@10.3.1.253's password: 
HP J9850A Switch 5406Rzl2
Software revision KB.16.02.0018

 (C) Copyright 2017 Hewlett Packard Enterprise Development LP

                      RESTRICTED RIGHTS LEGEND
 Confidential computer software. Valid license from Hewlett Packard Enterprise
 Development LP required for possession, use or copying. Consistent with FAR
 12.211 and 12.212, Commercial Computer Software, Computer Software
 Documentation, and Technical Data for Commercial Items are licensed to the
 U.S. Government under vendor's standard commercial license.

Press any key to continue

HP 5406R# show version
Management Module 1: Active
Image stamp:    /ws/swbuildm/rel_spokane_qaoff/code/build/bom(swbuildm_rel_spokane_qaoff_rel_spokane)
                Mar 30 2017 09:10:47
                KB.16.02.0018
                526
Boot Image:     Primary

Boot ROM Version:    KB.16.01.0006
Active Boot ROM:     Primary

HP 5406R# show vlan

 Status and Counters - VLAN Information

  Maximum VLANs to support : 256                  
  Primary VLAN : DEFAULT_VLAN    
  Management VLAN : control-hardware

  VLAN ID Name                             | Status     Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1       DEFAULT_VLAN                     | Port-based No    No   
  10      control-hardware                 | Port-based No    No   
  257     5003                             | Port-based No    No   
  258     5018                             | Port-based No    No   
  259     5051                             | Port-based No    No   
  901     5050                             | Port-based No    No   
  911     5048                             | Port-based No    No   
 

HP 5406R# show running-config 

Running configuration:

; J9850A Configuration Editor; Created on release #KB.16.02.0018
; Ver #10:08.01.81.b3.ff.7c.59.fc.7b.ff.ff.fc.ff.ff.3f.ef:5a
hostname "HP 5406R"
module A type j9990a
module B type j9995a
telnet-server listen data
no web-management
web-management listen data
ip default-gateway 10.3.1.7
ip ssh listen data
interface A1
   speed-duplex auto-1000
   exit
interface A2
   speed-duplex auto-1000
   exit
interface A3
   speed-duplex auto-1000
   exit
interface A4
   speed-duplex auto-1000
   exit
interface A5
   speed-duplex auto-1000
   exit
interface A6
   speed-duplex auto-1000
   exit
interface A7
   speed-duplex auto-1000
   exit
interface A8
   speed-duplex auto-1000
   exit
interface A9
   speed-duplex auto-1000
   exit
interface A10
   speed-duplex auto-1000
   exit
interface A13
   speed-duplex auto-1000
   exit
interface A14
   disable
   speed-duplex auto-1000
   exit
interface A19
   disable
   speed-duplex auto-1000
   exit
snmp-server community "xxxx" unrestricted
snmp-server community "xxxx" unrestricted
snmp-server listen data
openflow
   controller-id 1 ip 206.196.180.241 controller-interface vlan 10
   instance "instance_1"
      member vlan 911
      controller-id 1
      version 1.3
      max-backoff-interval 10
      enable
      exit
   enable
   exit
oobm
   disable
   ip address dhcp-bootp
   exit
vlan 1
   name "DEFAULT_VLAN"
   no untagged A1-A10,A13,A20-A21
   untagged A11-A12,A14-A19,A22-A24,B1-B8
   no ip address
   forbid A1-A9
   exit
vlan 10
   name "control-hardware"
   untagged A20
   ip address 10.3.1.253 255.255.255.0
   exit
vlan 257
   name "5003"
   no ip address
   exit
vlan 258
   name "5018"
   untagged A1-A9
   no ip address
   exit
vlan 259
   name "5051"
   untagged A10,A13
   no ip address
   exit
vlan 901
   name "5050"
   tagged A1,A21
   no ip address
   exit
vlan 911
   name "5048"
   tagged A1,A21
   no ip address
   exit
management-vlan 10
allow-unsupported-transceiver
no tftp server
tftp server listen data
no autorun
no dhcp config-file-update
no dhcp image-file-update
device-profile name "default-ap-profile"
   cos 0
   exit
no allow-v2-modules
activate provision disable
password xxx
password xxx

HP 5406R# 

HP 5406R# ping 172.217.7.228     
172.217.7.228 is alive, time = 34 ms
HP 5406R# 

Access the FlowVisor VM and gather version information:

LNM:~$ ssh lnevers@flowvisor.instageni.utdallas.edu
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-116-generic x86_64)

 * Documentation:  https://help.ubuntu.com/
New release '16.04.2 LTS' available.
Run 'do-release-upgrade' to upgrade to it.

Last login: Mon May 15 15:19:12 2017 from 128.89.73.1
lnevers@SDNnat:~$ sudo whoami
root
lnevers@SDNnat:~$ cat /etc/issue
Ubuntu 14.04.5 LTS \n \l

lnevers@SDNnat:~$ uname -a
Linux SDNnat 3.13.0-116-generic #163-Ubuntu SMP Fri Mar 31 14:13:22 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
lnevers@SDNnat:~$ 

IG-ST-1 New Site to GPO IG topology

The UTDallas site advertises the following stitching details:

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1.rspec:

$ stitcher.py createsliver IG-ST-1c IG-ST-1.rspec -o
13:10:59 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:10:59 INFO    : Reading slice IG-ST-1c credential...
13:11:00 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1c expires on 2017-05-16 17:10:59 UTC
13:11:00 INFO    : Calling SCS...
13:11:02 INFO    : Multi-AM reservation will include resources from these aggregates:
13:11:02 INFO    : 	<Aggregate utdallas-ig>
13:11:02 INFO    : 	<Aggregate gpo-ig>
13:11:02 INFO    : 	<Aggregate al2s>
13:11:02 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
13:11:23 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
13:11:23 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:11:49 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:11:49 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:11:57 INFO    : ... Allocation at <Aggregate al2s> complete.
13:11:57 INFO    : All aggregates are complete.
13:11:57 INFO    : Your resources expire at 2017-05-15T17:01:02 (UTC). 
13:11:57 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/UTDallas/IG-ST-1c-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1c at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UTDallas and GPO aggregate:

$ readyToLogin.py IG-ST-1c --useSliceAggregates
  ....
ig-gpo's geni_status is: ready[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   680 MBytes  95.0 Mbits/sec 
User lnevers logs in to ig-gpo using:
	ssh -p 25298  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

ig-utd's geni_status is: ready 
User lnevers logs in to ig-utd using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.utdallas.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI UTDallas VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   680 MBytes  95.0 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.1 sec   107 MBytes  14.9 Mbits/sec
[  5]  0.0-60.3 sec  93.8 MBytes  13.1 Mbits/sec
[  7]  0.0-60.3 sec   104 MBytes  14.5 Mbits/sec
[  6]  0.0-60.4 sec  98.5 MBytes  13.7 Mbits/sec
[  3]  0.0-60.4 sec   275 MBytes  38.1 Mbits/sec
[SUM]  0.0-60.4 sec   678 MBytes  94.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.0 sec  43.5 MBytes  6.08 Mbits/sec
[  9]  0.0-60.0 sec   168 MBytes  23.5 Mbits/sec
[  3]  0.0-60.1 sec  48.1 MBytes  6.72 Mbits/sec
[ 12]  0.0-60.4 sec  52.6 MBytes  7.31 Mbits/sec
[  7]  0.0-60.5 sec  46.6 MBytes  6.47 Mbits/sec
[  8]  0.0-60.6 sec  41.5 MBytes  5.75 Mbits/sec
[  6]  0.0-60.7 sec  58.4 MBytes  8.07 Mbits/sec
[  5]  0.0-60.8 sec  54.8 MBytes  7.56 Mbits/sec
[ 10]  0.0-60.8 sec  35.6 MBytes  4.92 Mbits/sec
[  4]  0.0-61.0 sec   141 MBytes  19.4 Mbits/sec
[SUM]  0.0-61.0 sec   690 MBytes  94.9 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI UTDallas VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512809 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   684 MBytes  95.6 Mbits/sec   0.125 ms 25209/512808 (4.9%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI UTDallas VM

60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 48.794/49.267/52.962/0.866 ms

Iperf InstaGENI UTDallas VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   584 MBytes  81.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   171 MBytes  23.8 Mbits/sec
[  7]  0.0-60.1 sec   157 MBytes  21.9 Mbits/sec
[  3]  0.0-60.5 sec   121 MBytes  16.7 Mbits/sec
[  4]  0.0-60.5 sec  90.2 MBytes  12.5 Mbits/sec
[  5]  0.0-60.5 sec   122 MBytes  17.0 Mbits/sec
[SUM]  0.0-60.5 sec   661 MBytes  91.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.0 sec  54.5 MBytes  7.61 Mbits/sec
[  6]  0.0-60.2 sec  87.4 MBytes  12.2 Mbits/sec
[ 11]  0.0-60.2 sec  82.8 MBytes  11.5 Mbits/sec
[  3]  0.0-60.2 sec  62.9 MBytes  8.76 Mbits/sec
[  9]  0.0-60.2 sec  56.4 MBytes  7.85 Mbits/sec
[ 10]  0.0-60.2 sec  56.8 MBytes  7.91 Mbits/sec
[  4]  0.0-60.3 sec  62.8 MBytes  8.73 Mbits/sec
[  5]  0.0-60.4 sec  69.5 MBytes  9.65 Mbits/sec
[  8]  0.0-60.5 sec  65.2 MBytes  9.05 Mbits/sec
[  7]  0.0-60.5 sec  78.0 MBytes  10.8 Mbits/sec
[SUM]  0.0-60.5 sec   676 MBytes  93.7 Mbits/sec

Iperf InstaGENI UTDallas VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512819 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   686 MBytes  95.7 Mbits/sec   0.064 ms 23504/512818 (4.6%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI UTDallas VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59036ms
rtt min/avg/max/mdev = 48.762/49.224/50.600/0.373 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
13:56:39 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:56:39 INFO    : Reading slice IG-ST-2 credential...
13:56:39 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2017-05-16 17:56:37 UTC
13:56:39 INFO    : Calling SCS...
13:56:40 INFO    : Multi-AM reservation will include resources from these aggregates:
13:56:40 INFO    : 	<Aggregate utdallas-ig>
13:56:40 INFO    : 	<Aggregate gpo-ig>
13:56:40 INFO    : 	<Aggregate al2s>
13:56:40 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
13:57:02 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
13:57:02 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:57:21 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:57:21 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:57:30 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3729', 'code': {'geni_code': 24}}
13:57:30 INFO    : Deleting some reservations to retry, avoiding failed VLAN...
13:57:30 INFO    : Doing deletesliver at <Aggregate gpo-ig>...
13:58:58 ERROR   :  {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+c79b2116fbfc2aaa7b4eccc1994d7f24', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=c79b2116fbfc2aaa7b4eccc1994d7f24'}, 'value': 0}
13:59:08 INFO    :  ... aggregate was busy, will retry ...
14:00:35 ERROR   :  {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+fd6007c609110185d5a28617a7ad2399', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=fd6007c609110185d5a28617a7ad2399'}, 'value': 0}
14:00:45 INFO    :  ... aggregate was busy, will retry ...
14:02:12 ERROR   :  {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+74fbb420536cd633968f44e460f5919f', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=74fbb420536cd633968f44e460f5919f'}, 'value': 0}
14:02:22 INFO    :  ... aggregate was busy, will retry ...
14:03:53 INFO    :  ... done.
14:03:53 INFO    : Will put <Aggregate al2s> back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at <Aggregate al2s>....
14:03:53 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


14:04:23 INFO    : Checking that prior reservation at <Aggregate gpo-ig> has been cleared up....
14:04:25 ERROR   :  {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+33de209c9bb005d993ea19d71362171f', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=33de209c9bb005d993ea19d71362171f'}, 'value': 0}
14:04:25 INFO    : ... it is, so can try a new reservation.
14:04:25 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:05:15 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:05:15 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
14:05:28 INFO    : ... Allocation at <Aggregate al2s> complete.
14:05:28 INFO    : All aggregates are complete.
14:05:28 INFO    : Your resources expire at 2017-05-15T17:46:40 (UTC). 
14:05:28 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/UTDallas/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each UTDallas and GPO aggregate:

$ readyToLogin.py IG-ST-2 --useSliceAggregates

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59055ms
rtt min/avg/max/mdev = 48.882/49.906/98.181/6.299 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 48.797/49.875/98.031/6.287 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3f IG-ST-3.rspec -o
14:25:35 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
14:25:35 INFO    : Reading slice IG-ST-3f credential...
14:25:36 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3f expires on 2017-05-16 18:25:30 UTC
14:25:36 INFO    : Calling SCS...
14:25:36 INFO    : Multi-AM reservation will include resources from these aggregates:
14:25:36 INFO    : 	<Aggregate utdallas-ig>
14:25:36 INFO    : 	<Aggregate gpo-ig>
14:25:36 INFO    : 	<Aggregate al2s>
14:25:36 INFO    : 	<Aggregate uwashington-ig>
14:25:36 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
14:25:59 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
14:25:59 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:26:17 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:26:17 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
14:26:38 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
14:26:39 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
14:26:52 INFO    : ... Allocation at <Aggregate al2s> complete.
14:26:52 INFO    : All aggregates are complete.
14:26:52 INFO    : Your resources expire at 2017-05-15T18:15:36 (UTC). 
14:26:52 INFO    : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/instarspec/UTDallas/IG-ST-3f-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3f at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the UTDallas host:

$ readyToLogin.py IG-ST-3f --useSliceAggregates
 ....
ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 25330  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

ig-utd's geni_status is: ready 
User lnevers logs in to ig-utd using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.utdallas.edu

ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 25170  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu

Login to the UTDallas host and ping each remote:

#ping GPO IG 
lnevers@ig-utd:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59073ms
rtt min/avg/max/mdev = 48.879/49.911/97.875/6.245 ms
lnevers@ig-utd:~$ 

# Washington IG

lnevers@ig-utd:~$  ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59076ms
rtt min/avg/max/mdev = 53.042/54.116/106.511/6.824 ms
lnevers@ig-utd:~$ 

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. Note "--defaultCapacity=100000" was used to get around the ExoGENI bug where request fails if no link speed is specified.

$ stitcher.py createsliver IG-ST-4w IG-ST-4.rspec -o --defaultCapacity=100000
14:48:10 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
14:48:10 INFO    : Reading slice IG-ST-4w credential...
14:48:10 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4w expires on 2017-05-16 18:48:10 UTC
14:48:10 INFO    : Calling SCS...
14:48:11 INFO    : Multi-AM reservation will include resources from these aggregates:
14:48:11 INFO    : 	<Aggregate utdallas-ig>
14:48:11 INFO    : 	<Aggregate al2s>
14:48:11 INFO    : 	<Aggregate gpo-eg>
14:48:11 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
14:48:33 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
14:48:33 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
14:48:47 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
14:48:47 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
14:48:49 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3738', 'code': {'geni_code': 24}}
14:48:49 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate al2s>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3738.))
14:48:49 INFO    : Deleting existing reservations...
14:48:49 INFO    : Doing deletesliver at <Aggregate utdallas-ig>...
14:48:52 INFO    : Deleted reservation at <Aggregate utdallas-ig>.
14:48:52 INFO    : Doing deletesliver at <Aggregate gpo-eg>...
14:48:58 INFO    : Deleted reservation at <Aggregate gpo-eg>.
14:48:58 INFO    : Calling SCS for the 2nd time...
14:48:59 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


14:49:29 INFO    : Multi-AM reservation will include resources from these aggregates:
14:49:29 INFO    : 	<Aggregate utdallas-ig>
14:49:29 INFO    : 	<Aggregate al2s>
14:49:29 INFO    : 	<Aggregate gpo-eg>
14:49:29 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
14:49:51 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
14:49:51 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
14:50:02 ERROR   :  {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/c401be4e-ff1b-4bd0-88b4-52560d6ed85e#/ef26a9cc-87c1-4c57-a7d2-cea4fea63b16.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
14:50:02 INFO    : Got an error reserving resources in IG-ST-4w at <Aggregate gpo-eg>
14:50:08 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4w at gpo-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4w among active slices.
14:50:08 INFO    : Will put <Aggregate gpo-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate gpo-eg> 2nd time with new suggested VLANs
14:50:08 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


14:50:38 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
14:50:47 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
14:50:48 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
14:50:55 INFO    : ... Allocation at <Aggregate al2s> complete.
14:50:55 INFO    : All aggregates are complete.
14:50:55 INFO    : Your resources expire at 2017-05-15T18:39:29 (UTC). 
14:50:55 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/UTDallas/IG-ST-4w-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4w at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UTDallas and GPO aggregate:

$ readyToLogin.py IG-ST-4w --useSliceAggregates
 ...
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.6

ig-utd's geni_status is: ready 
User lnevers logs in to ig-utd using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.utdallas.edu

Measurements

Iperf ExoGENI GPO VM to InstaGENI UTDallas VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   544 MBytes  76.0 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   140 MBytes  19.6 Mbits/sec
[  5]  0.0-60.0 sec   140 MBytes  19.5 Mbits/sec
[  6]  0.0-60.1 sec   129 MBytes  18.1 Mbits/sec
[  3]  0.0-60.1 sec   135 MBytes  18.9 Mbits/sec
[  7]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec
[SUM]  0.0-60.1 sec   685 MBytes  95.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.0 sec  0.00 ? ??s  2459565630537502208 Bytes/sec
[  4]  0.0-60.0 sec  81.1 MBytes  11.3 Mbits/sec
[  5]  0.0-60.1 sec  76.6 MBytes  10.7 Mbits/sec
[  7]  0.0-60.2 sec  76.6 MBytes  10.7 Mbits/sec
[  8]  0.0-60.2 sec  76.4 MBytes  10.6 Mbits/sec
[  3]  0.0-60.2 sec  75.9 MBytes  10.6 Mbits/sec
[ 11]  0.0-60.2 sec  76.4 MBytes  10.6 Mbits/sec
[  6]  0.0-60.2 sec  74.0 MBytes  10.3 Mbits/sec
[  9]  0.0-60.3 sec  76.2 MBytes  10.6 Mbits/sec
[ 12]  0.0-60.3 sec  74.5 MBytes  10.4 Mbits/sec
[SUM]  0.0-60.3 sec   684 MBytes  95.2 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI UTDallas VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   695 MBytes  97.1 Mbits/sec   0.015 ms 17105/512820 (3.3%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI UTDallas VM

60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 48.781/48.941/50.100/0.220 ms

Iperf InstaGENI UTDallas VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   421 MBytes  58.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   135 MBytes  18.9 Mbits/sec
[  3]  0.0-60.1 sec   127 MBytes  17.8 Mbits/sec
[  7]  0.0-60.1 sec   121 MBytes  16.9 Mbits/sec
[  4]  0.0-60.1 sec   144 MBytes  20.0 Mbits/sec
[  6]  0.0-60.2 sec   128 MBytes  17.8 Mbits/sec
[SUM]  0.0-60.2 sec   655 MBytes  91.3 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  71.8 MBytes  10.0 Mbits/sec
[  8]  0.0-60.0 sec  64.0 MBytes  8.95 Mbits/sec
[ 11]  0.0-60.0 sec  63.9 MBytes  8.93 Mbits/sec
[  3]  0.0-60.1 sec  62.6 MBytes  8.74 Mbits/sec
[  4]  0.0-60.2 sec  82.9 MBytes  11.6 Mbits/sec
[  6]  0.0-60.2 sec  63.6 MBytes  8.87 Mbits/sec
[ 10]  0.0-60.3 sec  70.4 MBytes  9.80 Mbits/sec
[  9]  0.0-60.3 sec  67.1 MBytes  9.34 Mbits/sec
[ 12]  0.0-60.3 sec  67.9 MBytes  9.45 Mbits/sec
[  5]  0.0-60.8 sec  64.2 MBytes  8.87 Mbits/sec
[SUM]  0.0-60.8 sec   678 MBytes  93.6 Mbits/sec

Iperf InstaGENI UTDallas VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512816 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   694 MBytes  97.0 Mbits/sec   0.038 ms 17913/512815 (3.5%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI UTDallas VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59111ms
rtt min/avg/max/mdev = 48.679/48.897/50.311/0.234 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the UTDallas Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs reviewed. No longer possible
  1. TO BE Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher createsliver IG-ST-6l ./IG-ST-6.rspec 
11:33:07 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
11:33:07 INFO    : Reading slice IG-ST-6l credential...
11:33:07 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6l expires on 2017-05-19 15:33:06 UTC
11:33:07 INFO    : Calling SCS...
11:33:08 INFO    : Multi-AM reservation will include resources from these aggregates:
11:33:08 INFO    : 	<Aggregate utdallas-ig>
11:33:08 INFO    : 	<Aggregate gpo-ig>
11:33:08 INFO    : 	<Aggregate al2s>
11:33:08 INFO    : Stitcher doing createsliver at <Aggregate utdallas-ig>...
11:33:28 INFO    : ... Allocation at <Aggregate utdallas-ig> complete.
11:33:28 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:33:45 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:33:45 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
11:33:53 INFO    : ... Allocation at <Aggregate al2s> complete.
11:33:53 INFO    : All aggregates are complete.
11:33:53 INFO    : Your resources expire at 2017-05-18T15:23:08 (UTC). 
11:33:53 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/UTDallas/IG-ST-6l-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6l at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UTDallas and GATech aggregate:

$ readyToLogin.py IG-ST-6l --useSliceAggregates
 ...
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pcvm2-1.instageni.gpolab.bbn.com

ig-utd's geni_status is: ready 
User lnevers logs in to ig-utd using:
	ssh -p 25074  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.utdallas.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI UTDallas VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-12

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  29.6 MBytes  4.14 Mbits/sec
[  4]  0.0-60.2 sec  29.0 MBytes  4.04 Mbits/sec
[  5]  0.0-60.8 sec  30.0 MBytes  4.14 Mbits/sec
[  6]  0.0-61.0 sec  25.1 MBytes  3.46 Mbits/sec
[  7]  0.0-61.1 sec  28.2 MBytes  3.88 Mbits/sec
[SUM]  0.0-61.1 sec   142 MBytes  19.5 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  14.1 MBytes  1.97 Mbits/sec
[  7]  0.0-60.4 sec  14.4 MBytes  2.00 Mbits/sec
[ 12]  0.0-60.4 sec  16.2 MBytes  2.26 Mbits/sec
[  4]  0.0-60.6 sec  12.5 MBytes  1.73 Mbits/sec
[ 11]  0.0-60.6 sec  14.8 MBytes  2.04 Mbits/sec
[  6]  0.0-60.8 sec  11.5 MBytes  1.59 Mbits/sec
[  8]  0.0-60.9 sec  11.4 MBytes  1.57 Mbits/sec
[ 10]  0.0-61.0 sec  9.62 MBytes  1.32 Mbits/sec
[  9]  0.0-61.1 sec  12.4 MBytes  1.70 Mbits/sec
[  3]  0.0-62.2 sec  25.6 MBytes  3.46 Mbits/sec
[SUM]  0.0-62.2 sec   142 MBytes  19.2 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI UTDallas VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512805 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   139 MBytes  19.4 Mbits/sec   0.103 ms 413659/512800 (81%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI UTDallas VM

60 packets transmitted, 60 received, 0% packet loss, time 59093ms
rtt min/avg/max/mdev = 48.798/49.344/56.532/1.163 ms

Iperf InstaGENI UTDallas VM to InstaGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-12

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   137 MBytes  19.1 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.4 sec  28.2 MBytes  3.93 Mbits/sec
[  6]  0.0-60.4 sec  28.9 MBytes  4.01 Mbits/sec
[  5]  0.0-60.4 sec  30.6 MBytes  4.25 Mbits/sec
[  4]  0.0-60.5 sec  27.8 MBytes  3.85 Mbits/sec
[  7]  0.0-60.6 sec  22.1 MBytes  3.06 Mbits/sec
[SUM]  0.0-60.6 sec   138 MBytes  19.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-59.7 sec  12.8 MBytes  1.79 Mbits/sec
[  6]  0.0-59.7 sec  16.5 MBytes  2.32 Mbits/sec
[  4]  0.0-59.8 sec  14.8 MBytes  2.07 Mbits/sec
[  8]  0.0-59.9 sec  13.6 MBytes  1.91 Mbits/sec
[  7]  0.0-59.9 sec  12.6 MBytes  1.77 Mbits/sec
[  5]  0.0-60.0 sec  13.4 MBytes  1.87 Mbits/sec
[  9]  0.0-60.1 sec  13.4 MBytes  1.87 Mbits/sec
[ 10]  0.0-60.1 sec  14.8 MBytes  2.06 Mbits/sec
[  3]  0.0-60.3 sec  14.0 MBytes  1.95 Mbits/sec
[ 11]  0.0-60.9 sec  13.8 MBytes  1.90 Mbits/sec
[SUM]  0.0-60.9 sec   140 MBytes  19.2 Mbits/sec

Iperf InstaGENI UTDallas VM to InstaGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512811 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.4 Mbits/sec  14.127 ms 413589/512809 (81%)
[  3]  0.0-60.3 sec  1 datagrams received out-of-order

Ping from InstaGENI UTDallas VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 48.755/48.931/49.271/0.124 ms

Email help@geni.net for GENI support or email me with feedback on this page!

Attachments (3)

Download all attachments as: .zip