wiki:GENIRacksHome/USIgniteInstageniRacks/ConfirmationTestStatus/UL-IGN

Version 35 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

University of Louisiana at Lafayette InstaGENI US Ignite Confirmation Tests

For details about the tests in this page, see the InstaGENI Confirmation Tests page.
For site status see the InstaGENI New Site Confirmation Tests Status page.

Note: Omni nick_names for site aggregates used for these tests are:

ullafayette-ig=urn:publicid:IDN+instageni.louisiana.edu+authority+cm,https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0

IG-CT-1 - Access to New Site VM resources

Aggregate Version:

$ omni getversion -a ullafayette-ig

The InstaGENI version in "'code_tag':'a4dcba972ec27a89499cbe5500ed6d071a854551'" is the same as the other InstaGENI US Ignite sites:

Site InstaGENI Code tag
louisiana-edu a4dcba972ec27a89499cbe5500ed6d071a854551
utdallas-edu a4dcba972ec27a89499cbe5500ed6d071a854551
uvm-edu a4dcba972ec27a89499cbe5500ed6d071a854551

Get list of "available" compute resources:

$ omni -a ullafayette-ig listresources --available -o

Verified that Advertisement RSpec only includes available resources, as requested:

$ egrep "node comp|available now" rspec-instageni-louisiana-edu.xml 
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="procurve2"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+procurve2"  exclusive="true" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="pc5"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc5"  exclusive="true" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="interconnect-al2s"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+interconnect-al2s"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="pc3"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc3"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="pc2"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc2"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="pc4"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc4"  exclusive="true" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="pc1"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc1"  exclusive="false" >
  <available now="true" />
<node component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" component_name="internet"  component_id="urn:publicid:IDN+instageni.louisiana.edu+node+internet"  exclusive="true" >
  <available now="true" />

Created a slice and a 4 VMs sliver using the RSpec IG-CT-1.rspec:

$ stitcher createsliver -a ullafayette-ig IG-CT-1 IG-CT-1.rspec
09:20:54 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:20:54 INFO    : Not a bound multi-aggregate request - let Omni handle this.
09:20:54 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
09:20:54 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
09:20:54 INFO    : Using control framework portal
09:20:54 INFO    : Member Authority is https://ch.geni.net/MA (from config)
09:20:54 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
09:20:54 INFO    : Substituting AM nickname ullafayette-ig with URL https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.louisiana.edu+authority+cm
09:20:54 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1 expires on 2017-05-16 13:18:22 UTC
09:20:54 INFO    : Creating sliver(s) from rspec file IG-CT-1.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1
09:21:15 INFO    :  (PG log url - look here for details on any failures: https://www.instageni.louisiana.edu/spewlogfile.php3?logfile=a916c495a81e261b973ff969d88bb9c4)
09:21:15 INFO    : Got return from CreateSliver for slice IG-CT-1 at ulla-ig:
09:21:15 INFO    : <?xml version="1.0" ?>
09:21:15 INFO    :   <!-- Reserved resources for:
	Slice: IG-CT-1
	at AM:
	URN: urn:publicid:IDN+instageni.louisiana.edu+authority+cm
	URL: https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0
 -->
09:21:15 INFO    :   <rspec expires="2017-05-16T13:18:22Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd">    

    <node client_id="xen1" component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc1" component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+53">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25042" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25042" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25042" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25042" username="lnevers"/>      <rs:console server="pc1.instageni.louisiana.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen1:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc1:eth1" mac_address="021890cad813" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+59">      
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm1-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen1.IG-CT-1.ch-geni-net.instageni.louisiana.edu"/>  </node>  
    <node client_id="xen2" component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc3" component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+56">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25042" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25042" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25042" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25042" username="lnevers"/>      <rs:console server="pc3.instageni.louisiana.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen2:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc3:eth1" mac_address="02266119e995" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+60">      
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm3-1" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen2.IG-CT-1.ch-geni-net.instageni.louisiana.edu"/>  </node>  
    <node client_id="xen3" component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc1" component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+54">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25043" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25043" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25043" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc1.instageni.louisiana.edu" port="25043" username="lnevers"/>      <rs:console server="pc1.instageni.louisiana.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen3:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc1:eth1" mac_address="025664630d34" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+61">      
            <ip address="192.168.1.3" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm1-3" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen3.IG-CT-1.ch-geni-net.instageni.louisiana.edu"/>  </node>  
    <node client_id="xen4" component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc2" component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+55">    
        <sliver_type name="emulab-xen"/>    
        <services>             <execute command="sudo apt-get install iperf -y" shell="sh"/>             <login authentication="ssh-keys" hostname="pc2.instageni.louisiana.edu" port="25042" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc2.instageni.louisiana.edu" port="25042" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc2.instageni.louisiana.edu" port="25042" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc2.instageni.louisiana.edu" port="25042" username="lnevers"/>      <rs:console server="pc2.instageni.louisiana.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>    
        <interface client_id="xen4:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc2:eth1" mac_address="0279cd6e7a0a" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+62">      
            <ip address="192.168.1.4" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm2-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="xen4.IG-CT-1.ch-geni-net.instageni.louisiana.edu"/>  </node>  
    <link client_id="lan0" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+58" vlantag="258">    
        <component_manager name="urn:publicid:IDN+instageni.louisiana.edu+authority+cm"/>    
        <interface_ref client_id="xen1:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+59"/>    
        <interface_ref client_id="xen2:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc3:eth1" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+60"/>    
        <interface_ref client_id="xen3:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+61"/>    
        <interface_ref client_id="xen4:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc2:eth1" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+62"/>    
        <link_type name="lan"/>    
    </link>  
  <rs:site_info xmlns:rs="http://www.protogeni.net/resources/rspec/ext/site-info/1">    <rs:location country="US" latitude="30.21534" longitude="-92.01917"/>  </rs:site_info></rspec>
09:21:15 INFO    : Reservation at ulla-ig in slice IG-CT-1 expires at 2017-05-16 13:18:22 (UTC).
Got Reserved resources RSpec from instageni-louisiana-edu. Reservation at ulla-ig in slice IG-CT-1 expires at 2017-05-16 13:18:22 (UTC).

The following is login information for the sliver:

$ readyToLogin -a ullafayette-ig IG-CT-1
<...>
xen4's geni_status is: ready 
User lnevers logs in to xen4 using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu

xen3's geni_status is: ready 
User lnevers logs in to xen3 using:
	ssh -p 25043  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.louisiana.edu

xen2's geni_status is: ready 
User lnevers logs in to xen2 using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu

xen1's geni_status is: ready 
User lnevers logs in to xen1 using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.louisiana.edu

Measurements

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

Iperf InstaGENI ULLafayette VM-2 to VM-1 (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   687 MBytes  96.0 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   130 MBytes  18.1 Mbits/sec
[  4]  0.0-60.0 sec   130 MBytes  18.1 Mbits/sec
[  7]  0.0-60.3 sec   175 MBytes  24.3 Mbits/sec
[  3]  0.0-60.5 sec   138 MBytes  19.2 Mbits/sec
[  6]  0.0-60.5 sec   126 MBytes  17.5 Mbits/sec
[SUM]  0.0-60.5 sec   698 MBytes  96.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.0 sec  73.4 MBytes  10.3 Mbits/sec
[ 11]  0.0-60.2 sec  64.5 MBytes  8.99 Mbits/sec
[  9]  0.0-60.4 sec  64.6 MBytes  8.98 Mbits/sec
[  4]  0.0-60.4 sec  74.2 MBytes  10.3 Mbits/sec
[  7]  0.0-60.4 sec  73.9 MBytes  10.3 Mbits/sec
[ 10]  0.0-60.4 sec  65.5 MBytes  9.10 Mbits/sec
[  8]  0.0-60.4 sec  64.2 MBytes  8.92 Mbits/sec
[  6]  0.0-60.5 sec  74.6 MBytes  10.4 Mbits/sec
[  3]  0.0-60.5 sec  65.1 MBytes  9.03 Mbits/sec
[  5]  0.0-60.6 sec  74.1 MBytes  10.3 Mbits/sec
[SUM]  0.0-60.6 sec   694 MBytes  96.1 Mbits/sec

Iperf InstaGENI ULLafayette VM-2 to the VM-1 (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512814 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   688 MBytes  96.2 Mbits/sec   0.017 ms 22095/512813 (4.3%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI ULLafayette VM-2 to the VM-1

60 packets transmitted, 60 received, 0% packet loss, time 58998ms
rtt min/avg/max/mdev = 0.513/0.609/2.749/0.287 ms

IG-CT-2 - Access to New Site bare metal and VM resources

Created a slice and a sliver with one VM and one Raw PC using RSpec IG-CT-2.rspec

$ stitcher createsliver -a ullafayette-ig IG-CT-2 IG-CT-2.rspec
09:55:14 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:55:14 INFO    : Not a bound multi-aggregate request - let Omni handle this.
09:55:14 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
09:55:14 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
09:55:14 INFO    : Using control framework portal
09:55:14 INFO    : Member Authority is https://ch.geni.net/MA (from config)
09:55:14 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
09:55:14 INFO    : Substituting AM nickname ullafayette-ig with URL https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.louisiana.edu+authority+cm
09:55:15 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2 expires on 2017-05-16 13:54:59 UTC
09:55:15 INFO    : Creating sliver(s) from rspec file IG-CT-2.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2
09:55:34 INFO    :  (PG log url - look here for details on any failures: https://www.instageni.louisiana.edu/spewlogfile.php3?logfile=57cc552f2427fdd663dc746634d1ae00)
09:55:34 INFO    : Got return from CreateSliver for slice IG-CT-2 at ulla-ig:
09:55:34 INFO    : <?xml version="1.0" ?>
09:55:34 INFO    :   <!-- Reserved resources for:
	Slice: IG-CT-2
	at AM:
	URN: urn:publicid:IDN+instageni.louisiana.edu+authority+cm
	URL: https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0
 -->
09:55:34 INFO    :   <rspec expires="2017-05-16T13:54:59Z" type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd">    

   <node client_id="VM" component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc3" component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+63">    
        <sliver_type name="emulab-xen"/>    
        <interface client_id="VM:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc3:eth1" mac_address="029855fc7719" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+67">      
            <ip address="192.168.1.1" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="pcvm" name="pcvm3-2" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="VM.IG-CT-2.ch-geni-net.instageni.louisiana.edu"/>    <services>      <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25106" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25106" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25106" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc3.instageni.louisiana.edu" port="25106" username="lnevers"/>      <rs:console server="pc3.instageni.louisiana.edu" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    </services>  </node>  
    <node client_id="PC" component_id="urn:publicid:IDN+instageni.louisiana.edu+node+pc4" component_manager_id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" exclusive="true" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+64">    
       <sliver_type name="raw-pc"> </sliver_type>    
        <interface client_id="PC:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc4:eth1" mac_address="02037bb946ad" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+68">      
            <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
      <rs:vnode hardware_type="dl360" name="pc4" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host ipv4="104.141.5.16" name="PC.IG-CT-2.ch-geni-net.instageni.louisiana.edu"/>    <services>      <login authentication="ssh-keys" hostname="pc4.instageni.louisiana.edu" port="22" username="asydne01"/>      <login authentication="ssh-keys" hostname="pc4.instageni.louisiana.edu" port="22" username="lnevers1"/>      <login authentication="ssh-keys" hostname="pc4.instageni.louisiana.edu" port="22" username="lnevers2"/>      <login authentication="ssh-keys" hostname="pc4.instageni.louisiana.edu" port="22" username="lnevers"/>    </services>  </node>  
    <link client_id="lan0" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+66" vlantag="259">    
        <component_manager name="urn:publicid:IDN+instageni.louisiana.edu+authority+cm"/>    
        <interface_ref client_id="VM:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc3:eth1" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+67"/>    
        <interface_ref client_id="PC:if0" component_id="urn:publicid:IDN+instageni.louisiana.edu+interface+pc4:eth1" sliver_id="urn:publicid:IDN+instageni.louisiana.edu+sliver+68"/>    
        <link_type name="lan"/>    
    </link>  
  <rs:site_info xmlns:rs="http://www.protogeni.net/resources/rspec/ext/site-info/1">    <rs:location country="US" latitude="30.21534" longitude="-92.01917"/>  </rs:site_info></rspec>
09:55:34 INFO    : Reservation at ulla-ig in slice IG-CT-2 expires at 2017-05-16 13:54:59 (UTC).
Got Reserved resources RSpec from instageni-louisiana-edu. Reservation at ulla-ig in slice IG-CT-2 expires at 2017-05-16 13:54:59 (UTC).

Determined login information:

$ readyToLogin -a ullafayette-ig IG-CT-2
<...>
PC's geni_status is: ready 
User lnevers logs in to PC using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.louisiana.edu

VM's geni_status is: ready 
User lnevers logs in to VM using:
	ssh -p 25106  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu

Measurements

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

Iperf InstaGENI ULLafayette PC to VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   685 MBytes  95.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   136 MBytes  18.9 Mbits/sec
[  7]  0.0-60.0 sec   138 MBytes  19.3 Mbits/sec
[  5]  0.0-60.1 sec   144 MBytes  20.1 Mbits/sec
[  6]  0.0-60.1 sec   135 MBytes  18.9 Mbits/sec
[  3]  0.0-60.1 sec   135 MBytes  18.9 Mbits/sec
[SUM]  0.0-60.1 sec   688 MBytes  96.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  68.5 MBytes  9.57 Mbits/sec
[  4]  0.0-60.1 sec  68.5 MBytes  9.57 Mbits/sec
[  6]  0.0-60.2 sec  68.6 MBytes  9.57 Mbits/sec
[ 12]  0.0-60.2 sec  68.6 MBytes  9.57 Mbits/sec
[ 10]  0.0-60.2 sec  68.5 MBytes  9.55 Mbits/sec
[  5]  0.0-60.2 sec  68.5 MBytes  9.55 Mbits/sec
[  7]  0.0-60.2 sec  68.5 MBytes  9.55 Mbits/sec
[ 11]  0.0-60.2 sec  68.5 MBytes  9.55 Mbits/sec
[  9]  0.0-60.3 sec  68.6 MBytes  9.55 Mbits/sec
[  8]  0.0-60.3 sec  68.6 MBytes  9.55 Mbits/sec
[SUM]  0.0-60.3 sec   686 MBytes  95.4 Mbits/sec

Iperf InstaGENI ULLafayette PC to the VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   694 MBytes  97.0 Mbits/sec
[  3] Sent 494952 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   694 MBytes  96.9 Mbits/sec   0.004 ms  127/494951 (0.026%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI ULLafayette PC to VM

60 packets transmitted, 60 received, 0% packet loss, time 58999ms
rtt min/avg/max/mdev = 0.334/0.374/0.407/0.027 ms

Iperf InstaGENI ULLafayette VM to PC (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   686 MBytes  95.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec   134 MBytes  18.7 Mbits/sec
[  3]  0.0-60.1 sec   144 MBytes  20.1 Mbits/sec
[  5]  0.0-60.1 sec   135 MBytes  18.8 Mbits/sec
[  7]  0.0-60.1 sec   133 MBytes  18.6 Mbits/sec
[  4]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec
[SUM]  0.0-60.1 sec   685 MBytes  95.5 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  71.2 MBytes  9.95 Mbits/sec
[  7]  0.0-60.1 sec  67.8 MBytes  9.46 Mbits/sec
[  5]  0.0-60.1 sec  66.4 MBytes  9.26 Mbits/sec
[ 11]  0.0-60.1 sec  68.6 MBytes  9.57 Mbits/sec
[  4]  0.0-60.1 sec  73.0 MBytes  10.2 Mbits/sec
[ 12]  0.0-60.1 sec  66.6 MBytes  9.29 Mbits/sec
[  9]  0.0-60.2 sec  67.1 MBytes  9.36 Mbits/sec
[ 10]  0.0-60.2 sec  70.1 MBytes  9.77 Mbits/sec
[  6]  0.0-60.2 sec  70.1 MBytes  9.77 Mbits/sec
[  8]  0.0-60.5 sec  65.2 MBytes  9.05 Mbits/sec
[SUM]  0.0-60.5 sec   686 MBytes  95.2 Mbits/sec

Iperf InstaGENI ULLafayette VM to the PC (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512816 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   695 MBytes  97.1 Mbits/sec   0.036 ms 17266/512815 (3.4%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI ULLafayette VM to PC

60 packets transmitted, 60 received, 0% packet loss, time 59000ms
rtt min/avg/max/mdev = 0.312/0.370/0.414/0.024 ms

IG-CT-3 - Multiple sites experiment

Created a slice and a sliver with one VM at ULLafayette and one VMi at GPO using RSpec IG-CT-3.rspec. Used stitcher to create both the ULLafayette and GPO slivers:

$ stitcher createsliver IG-CT-3a IG-CT-3.rspec 
10:29:19 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
10:29:19 INFO    : Reading slice IG-CT-3a credential...
10:29:19 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-3a expires on 2017-05-16 14:29:14 UTC
10:29:19 INFO    : Multi-AM reservation will include resources from these aggregates:
10:29:19 INFO    : 	<Aggregate nysernet-ig>
10:29:19 INFO    : 	<Aggregate ulla-ig>
10:29:19 INFO    : Stitcher doing createsliver at <Aggregate nysernet-ig>...
10:29:38 INFO    : ... Allocation at <Aggregate nysernet-ig> complete.
10:29:38 INFO    : Stitcher doing createsliver at <Aggregate ulla-ig>...
10:29:57 INFO    : ... Allocation at <Aggregate ulla-ig> complete.
10:29:57 INFO    : All aggregates are complete.
10:29:57 INFO    : Your resources expire at 2017-05-15T14:19:19 (UTC). 
10:29:57 INFO    : Saved combined reservation RSpec at 2 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-CT-3a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-CT-3a at 2 Aggregates, creating 1 GRE link(s).

Determined login information at each ULLafayette and GPO aggregate:

$ readyToLogin IG-CT-3 --useSliceAggregates
ig-ulla's geni_status is: ready 
User lnevers logs in to ig-ulla using:
	ssh -p 25138  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu

ig-nyse's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.nysernet.org

Measurements

Iperf InstaGENI NYSERNet VM to ULLafayette VM (TCP) - TCP window size: 45.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   651 MBytes  90.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.2 sec   126 MBytes  17.5 Mbits/sec
[  5]  0.0-60.2 sec   130 MBytes  18.0 Mbits/sec
[  3]  0.0-60.2 sec   138 MBytes  19.2 Mbits/sec
[  7]  0.0-60.3 sec   146 MBytes  20.3 Mbits/sec
[  6]  0.0-60.3 sec   120 MBytes  16.7 Mbits/sec
[SUM]  0.0-60.3 sec   659 MBytes  91.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.0 sec  65.2 MBytes  9.12 Mbits/sec
[  6]  0.0-60.0 sec  60.5 MBytes  8.46 Mbits/sec
[  9]  0.0-60.0 sec  61.4 MBytes  8.58 Mbits/sec
[ 12]  0.0-60.0 sec  63.9 MBytes  8.93 Mbits/sec
[  3]  0.0-60.1 sec  62.2 MBytes  8.69 Mbits/sec
[  8]  0.0-60.2 sec  75.0 MBytes  10.5 Mbits/sec
[ 10]  0.0-60.2 sec  69.1 MBytes  9.64 Mbits/sec
[  4]  0.0-60.2 sec  66.6 MBytes  9.29 Mbits/sec
[  5]  0.0-60.2 sec  55.0 MBytes  7.66 Mbits/sec
[  7]  0.0-60.3 sec  79.4 MBytes  11.0 Mbits/sec
[SUM]  0.0-60.3 sec   658 MBytes  91.6 Mbits/sec

Iperf InstaGENI NYSERNet VM to ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512742 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   522 MBytes  72.9 Mbits/sec  11.162 ms 140126/512741 (27%)
[  3]  0.0-60.1 sec  2 datagrams received out-of-order

Ping from InstaGENI NYSERNet VM to the ULLafayette VM

60 packets transmitted, 60 received, 0% packet loss, time 59047ms
rtt min/avg/max/mdev = 55.044/55.197/56.054/0.308 ms

Iperf InstaGENI ULLafayette VM to NYSERNet VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-05-09

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   651 MBytes  90.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   114 MBytes  16.0 Mbits/sec
[  4]  0.0-60.0 sec   138 MBytes  19.3 Mbits/sec
[  7]  0.0-60.0 sec   106 MBytes  14.8 Mbits/sec
[  6]  0.0-60.0 sec   136 MBytes  19.0 Mbits/sec
[  3]  0.0-60.1 sec   158 MBytes  22.0 Mbits/sec
[SUM]  0.0-60.1 sec   652 MBytes  90.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.0 sec  81.5 MBytes  11.4 Mbits/sec
[  6]  0.0-60.0 sec  73.4 MBytes  10.3 Mbits/sec
[ 12]  0.0-60.1 sec  60.1 MBytes  8.40 Mbits/sec
[  7]  0.0-60.1 sec  72.9 MBytes  10.2 Mbits/sec
[ 11]  0.0-60.1 sec  50.2 MBytes  7.01 Mbits/sec
[  9]  0.0-60.1 sec  74.1 MBytes  10.3 Mbits/sec
[  8]  0.0-60.2 sec  53.2 MBytes  7.42 Mbits/sec
[  4]  0.0-60.3 sec  66.1 MBytes  9.20 Mbits/sec
[  5]  0.0-60.3 sec  70.4 MBytes  9.79 Mbits/sec
[  3]  0.0-60.3 sec  57.2 MBytes  7.96 Mbits/sec
[SUM]  0.0-60.3 sec   659 MBytes  91.6 Mbits/sec

Iperf InstaGENI ULLafayette VM to NYSERNet VM (UDP) - 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512817 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   610 MBytes  85.3 Mbits/sec   0.130 ms 77517/512816 (15%)
[  3]  0.0-60.0 sec  4 datagrams received out-of-order

Ping from InstaGENI ULLafayette VM to NYSERNet VM

60 packets transmitted, 60 received, 0% packet loss, time 59068ms
rtt min/avg/max/mdev = 54.932/55.170/55.592/0.221 ms

IG-CT-4 - Multiple sites OpenFlow experiment and interoperability

Meso-scale no longer supported, see Stitching OpenFlow test IG-ST-6 status.

IG-CT-5 - Experiment Monitoring

GENI Monitoring

Check for site's compute aggregate availability and External Checks for site aggregates:

Check for status for one of the site VM Servers:

Check for status of GPO Check for Stitching:

IG-CT-6 - Administrative Tests

Sent request for administrative account to site contact from the ULLafayette InstaGENI aggregate page. Followed instructions at the InstaGENI Administration page for account request. A local administrator account was requested by joining the emulab-ops group at https://www.instageni.louisiana.edu/joinproject.php3. Once the administrative account was approved and the membership to emulab-ops was granted, proceeded to execute administrative tests.

LNM:~$  ssh control.instageni.louisiana.edu
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-119-generic x86_64)

 * Documentation:  https://help.ubuntu.com/

  System information as of Wed May 31 18:49:01 UTC 2017

  System load:     0.03              IP address for xenbr0: 104.141.5.3
  Usage of /:      25.4% of 5.65GB   IP address for xenbr1: 10.1.1.254
  Memory usage:    1%                IP address for xenbr2: 10.2.1.254
  Swap usage:      0%                IP address for xenbr3: 10.3.1.254
  Processes:       372               IP address for tun0:   10.8.0.1
  Users logged in: 0

  Graph this data and manage this system at:
    https://landscape.canonical.com/
New release '16.04.2 LTS' available.
Run 'do-release-upgrade' to upgrade to it.


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

lnevers@ullafayette:~$ sudo whoami
root
lnevers@ullafayette:~$ uname -a
Linux ullafayette.control-nodes.geniracks.net 3.13.0-119-generic #166-Ubuntu SMP Wed May 3 12:18:55 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
lnevers@ullafayette:~$ 

Also access the boss node:

LNM:~$ ssh boss.instageni.louisiana.edu
Last login: Mon May 22 12:43:36 2017 from ops.instageni.louisiana.edu
FreeBSD 10.2-RELEASE-p22 (TESTBED-GENERIC-IB) #0: Fri Sep 30 11:18:46 MDT 2016

Welcome to FreeBSD!

Ever wonder what those numbers after command names were, as in cat(1)?  It's
the section of the manual the man page is in.  "man man" will tell you more.
		-- David Scheidt <dscheidt@tumbolia.com>
lnevers@boss:~ % sudo whoami
root
lnevers@boss:~ % uname -a
FreeBSD boss.instageni.louisiana.edu 10.2-RELEASE-p22 FreeBSD 10.2-RELEASE-p22 #0: Fri Sep 30 11:18:46 MDT 2016     root@node.freebsd102-64.emulab-ops.emulab.net:/usr/obj/usr/src/sys/TESTBED-GENERIC-IB  amd64
lnevers@boss:~ % 

From boss node accessed each of the experiment nodes that support VMs:

[lnevers@boss ~]$ for i in pc1 pc2 pc3; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done
Warning: Permanently added 'pc1.instageni.louisiana.edu' (RSA) to the list of known hosts.
===> Host: vhost1.shared-nodes.emulab-ops.instageni.louisiana.edu
root
Linux vhost1.shared-nodes.emulab-ops.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Warning: Permanently added 'pc2.instageni.louisiana.edu' (RSA) to the list of known hosts.
===> Host: vhost2.shared-nodes.emulab-ops.instageni.louisiana.edu
root
Linux vhost2.shared-nodes.emulab-ops.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Warning: Permanently added 'pc3.instageni.louisiana.edu' (RSA) to the list of known hosts.
===> Host: vhost3.shared-nodes.emulab-ops.instageni.louisiana.edu
root
Linux vhost3.shared-nodes.emulab-ops.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

[lnevers@boss ~]$ 

In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pc4 and pc5):

[lnevers@boss ~]$ for i in pc4 pc5 ; do sudo ssh $i "echo -n '===> Host: ';hostname;whoami;uname -a;echo"; done 
===> Host: pc.2pc.ch-geni-net.instageni.louisiana.edu
root
Linux pc.2pc.ch-geni-net.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

===> Host: pc2.2pc.ch-geni-net.instageni.louisiana.edu
root
Linux pc2.2pc.ch-geni-net.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

[lnevers@boss ~]$ 

Further verified access by ssh from ops.instageni.louisiana.edu to boss.instageni.louisiana.edu, which is usually restricted for non-admin users:

LNM:~$ ssh ops.instageni.louisiana.edu
Last login: Mon May 22 12:43:31 2017 from 128.89.73.1
FreeBSD 10.2-RELEASE-p22 (TESTBED-GENERIC-IB) #0: Fri Sep 30 11:18:46 MDT 2016

Welcome to FreeBSD!

Want colour in your directory listings?  Use "ls -G".  "ls -F" is also useful,
and they can be combined as "ls -FG".
lnevers@ops:~ % ssh boss
Last login: Wed May 31 15:16:13 2017 from 128.89.73.1
FreeBSD 10.2-RELEASE-p22 (TESTBED-GENERIC-IB) #0: Fri Sep 30 11:18:46 MDT 2016

Welcome to FreeBSD!

In order to search for a string in some files, use 'grep' like this:

	 grep "string" filename1 [filename2 filename3 ...]

This will print out the lines in the files that contain the string.  grep can
also do a lot more advanced searches - type 'man grep' for details.
lnevers@boss:~ % 

Access infrastructure switches using documented password. First connect to the switch named procurve1 the control network switch:

[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
XXXXXXXXX
[lnevers@boss ~]$ sudo ssh procurve1
We'd like to keep you up to date about:
  * Software feature updates
  * New product announcements
  * Special events
Please register your products now at:  www.hpe.com/networking/register


Aruba JL071A 3810M-24G-1-slot Switch
Software revision KB.16.01.0004

Copyright (C) 2016 Aruba, a Hewlett Packard Enterprise company.

                   RESTRICTED RIGHTS LEGEND
 Confidential computer software.  Valid license from  Hewlett Packard
 Enterprise required for possession, use or copying. Consistent with FAR
 12.211 and 12.212, Commercial Computer Software, Computer Software
 Documentation, and Technical Data for Commercial Items are licensed to
 the U.S. Government under vendor's standard commercial license.

Press any key to continue

Aruba-3810M-24G-1-slot# 
Aruba-3810M-24G-1-slot# show version  
Image stamp:   
 /ws/swbuildm/rel_richmond_qaoff/code/build/bom(swbuildm_rel_richmond_qaoff_rel_
richmond)
                Jan 17 2016 15:59:54
                KB.16.01.0004
                215
Boot Image:     Primary

Boot ROM Version:    KB.16.01.0005
Active Boot ROM:     Primary

Aruba-3810M-24G-1-slot# show vlan

 Status and Counters - VLAN Information

  Maximum VLANs to support : 256                  
  Primary VLAN : DEFAULT_VLAN     
  Management VLAN : control-hardware 

  VLAN ID Name                             | Status     Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1       DEFAULT_VLAN                     | Port-based No    No   
  10      control-hardware                 | Port-based No    No   
  11      control-alternate                | Port-based No    No   
 

Aruba-3810M-24G-1-slot# sho interfaces brief 

 Status and Counters - Port Status

                          | Intrusion                           MDI  Flow Bcast
  Port         Type       | Alert     Enabled Status Mode       Mode Ctrl Limit
  ------------ ---------- + --------- ------- ------ ---------- ---- ---- -----
  1            100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  2            100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  3            100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  4            100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  5            100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  6            100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  7            100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  8            100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  9            100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  10           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  11           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  12           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  13           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  14           100/1000T  | No        Yes     Down   1000FDx    NA   off  0    
  15           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  16           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  17           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  18           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  19           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  20           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  21           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  22           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  23           100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  24           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A1                      | No        Yes     Down   .               off  0    
  A2                      | No        Yes     Down   .               off  0    
  A3                      | No        Yes     Down   .               off  0    
  A4                      | No        Yes     Down   .               off  0    
 
Aruba-3810M-24G-1-slot# show running-config 

Running configuration:

; JL071A Configuration Editor; Created on release #KB.16.01.0004
; Ver #0c:01.7c.59.f4.7b.ff.ff.fc.ff.ff.3f.ef:

hostname "Aruba-3810M-24G-1-slot"
module 1 type jl071x
flexible-module A type JL083A
telnet-server listen data
no web-management
web-management listen data
ip default-gateway 10.1.1.254
ip ssh listen data
snmp-server community "xxx" unrestricted
snmp-server listen data
aaa authentication ssh login public-key
aaa authentication ssh enable public-key
oobm
   disable
   ip address dhcp-bootp
   exit
vlan 1
   name "DEFAULT_VLAN"
   no untagged 18-19
   untagged 1-17,20-24,A1-A4
   ip address 10.254.254.253 255.255.255.0
   ip igmp
   exit
vlan 10
   name "control-hardware"
   untagged 18
   ip address 10.1.1.253 255.255.255.0
   exit
vlan 11
   name "control-alternate"
   untagged 19
   ip address 10.2.1.253 255.255.255.0
   exit
management-vlan 10
no tftp server
tftp server listen data
no autorun
no dhcp config-file-update
no dhcp image-file-update
password xx
password xxx

Aruba-3810M-24G-1-slot# 


Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password:

[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
xxxxxxx
[lnevers@boss ~]$ sudo ssh procurve2
We'd like to keep you up to date about:
  * Software feature updates
  * New product announcements
  * Special events
Please register your products now at:  www.hpe.com/networking/register


manager@10.3.1.253's password: 
HP J9850A Switch 5406Rzl2
Software revision KB.16.02.0018

 (C) Copyright 2017 Hewlett Packard Enterprise Development LP

                      RESTRICTED RIGHTS LEGEND
 Confidential computer software. Valid license from Hewlett Packard Enterprise
 Development LP required for possession, use or copying. Consistent with FAR
 12.211 and 12.212, Commercial Computer Software, Computer Software
 Documentation, and Technical Data for Commercial Items are licensed to the
 U.S. Government under vendor's standard commercial license.

Press any key to continue

HP 5406R# show version
Management Module 1: Active
Image stamp:   
 /ws/swbuildm/rel_spokane_qaoff/code/build/bom(swbuildm_rel_spokane_qaoff_rel_sp
okane)
                Mar 30 2017 09:10:47
                KB.16.02.0018
                526
Boot Image:     Primary

Boot ROM Version:    KB.16.01.0006
Active Boot ROM:     Primary

HP 5406R# show vlan

 Status and Counters - VLAN Information

  Maximum VLANs to support : 256                  
  Primary VLAN : DEFAULT_VLAN    
  Management VLAN : control-hardware

  VLAN ID Name                             | Status     Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1       DEFAULT_VLAN                     | Port-based No    No   
  10      control-hardware                 | Port-based No    No   
  257     5008                             | Port-based No    No   
  258     5154                             | Port-based No    No   
  3995    5023                             | Port-based No    No   
 

HP 5406R# show interfaces brief 

 Status and Counters - Port Status

                          | Intrusion                           MDI  Flow Bcast
  Port         Type       | Alert     Enabled Status Mode       Mode Ctrl Limit
  ------------ ---------- + --------- ------- ------ ---------- ---- ---- -----
  A1           100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  A2           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A3           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A4           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A5           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A6           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A7           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A8           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A9           100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A10          100/1000T  | No        Yes     Up     1000FDx    MDIX off  0    
  A11          100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  A12          100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  A13          100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  A14          100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  A15          100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  A16          100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  A17          100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  A18          100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  A19          100/1000T  | No        Yes     Down   1000FDx    Auto off  0    
  A20          100/1000T  | No        Yes     Up     1000FDx    MDI  off  0    
  A21          SFP+LR     | No        Yes     Up     10GigFD    NA   off  0    
  A22                     | No        Yes     Down   .               off  0    
  A23                     | No        Yes     Down   .               off  0    
  A24                     | No        Yes     Down   .               off  0    
  B1           10GbE-T    | No        Yes     Up     1000FDx    MDIX off  0    
  B2           10GbE-T    | No        Yes     Up     1000FDx    MDIX off  0    
  B3           10GbE-T    | No        Yes     Up     1000FDx    MDI  off  0    
  B4           10GbE-T    | No        Yes     Up     1000FDx    MDI  off  0    
  B5           10GbE-T    | No        Yes     Up     1000FDx    MDIX off  0    
  B6           10GbE-T    | No        Yes     Down   10GigFD    Auto off  0    
  B7           10GbE-T    | No        Yes     Down   10GigFD    Auto off  0    
  B8           10GbE-T    | No        Yes     Up     1000FDx    MDI  off  0    
 
HP 5406R# show running-config 

Running configuration:

; J9850A Configuration Editor; Created on release #KB.16.02.0018
; Ver #10:08.01.81.b3.ff.7c.59.fc.7b.ff.ff.fc.ff.ff.3f.ef:5a
hostname "HP 5406R"
module A type j9990a
module B type j9995a
telnet-server listen data
no web-management
web-management listen data
ip default-gateway 10.3.1.7
ip ssh listen data
interface A1
   speed-duplex auto-1000
   exit
interface A2
   speed-duplex auto-1000
   exit
interface A3
   speed-duplex auto-1000
   exit
interface A4
   speed-duplex auto-1000
   exit
interface A5
   speed-duplex auto-1000
   exit
interface A6
   speed-duplex auto-1000
   exit
interface A7
   speed-duplex auto-1000
   exit
interface A8
   speed-duplex auto-1000
   exit
interface A9
   speed-duplex auto-1000
   exit
interface A10
   speed-duplex auto-1000
   exit
interface A13
   speed-duplex auto-1000
   exit
snmp-server community "xxx" unrestricted
snmp-server listen data
openflow
   enable
   exit
oobm
   disable
   ip address dhcp-bootp
   exit
vlan 1
   name "DEFAULT_VLAN"
   no untagged A1-A10,A13,A20-A21
   untagged A11-A12,A14-A19,A22-A24,B1-B8
   no ip address
   forbid A1-A9
   exit
vlan 10
   name "control-hardware"
   untagged A20
   ip address 10.3.1.253 255.255.255.0
   exit
vlan 257
   name "5008"
   untagged A1-A9
   no ip address
   exit
vlan 258
   name "5154"
   untagged A10,A13
   no ip address
   exit
vlan 3995
   name "5023"
   tagged A4,A21
   no ip address
   exit
management-vlan 10
no tftp server
tftp server listen data
no autorun
no dhcp config-file-update
no dhcp image-file-update
device-profile name "default-ap-profile"
   cos 0
   exit
no allow-v2-modules
activate provision disable
password xxx
password xxx

HP 5406R# ping 172.217.7.228
172.217.7.228 is alive, time = 48 ms
HP 5406R# 

Access the FlowVisor VM and gather version information:

LNM:~$ ssh flowvisor.instageni.louisiana.edu
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-116-generic x86_64)

 * Documentation:  https://help.ubuntu.com/
New release '16.04.2 LTS' available.
Run 'do-release-upgrade' to upgrade to it.


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

lnevers@SDNnat:~$ sudo whoami 
root
lnevers@SDNnat:~$ uname -a
Linux SDNnat 3.13.0-116-generic #163-Ubuntu SMP Fri Mar 31 14:13:22 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
lnevers@SDNnat:~$ 

IG-ST-1 New Site to GPO IG topology

The ULLafayette site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2017-05-09T13:24:24Z" >
<aggregate id="urn:publicid:IDN+instageni.louisiana.edu+authority+cm" url="https://www.instageni.louisiana.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2017-05-09T13:24:24Z</start>
    <end type="time">2017-05-09T13:24:24Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.louisiana.edu+node+procurve2">
  <port id="urn:publicid:IDN+instageni.louisiana.edu+stitchport+procurve2:1.21.al2s">
    <capacity>10000000</capacity>
    <maximumReservableCapacity>10000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.louisiana.edu+interface+procurve2:1.21.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.bato.net.internet2.edu:et-8/0/0.0:ullafayette-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>10000000</capacity>
      <maximumReservableCapacity>10000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>3980-3986,3988-3994,3996-3999</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1.rspec:

$ stitcher.py createsliver IG-ST-1 IG-ST-1.rspec -o
09:04:29 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:04:29 INFO    : Reading slice IG-ST-1 credential...
09:04:29 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2017-06-26 13:04:18 UTC
09:04:29 INFO    : Calling SCS...
09:04:35 INFO    : Multi-AM reservation will include resources from these aggregates:
09:04:35 INFO    : 	<Aggregate ulla-ig>
09:04:35 INFO    : 	<Aggregate gpo-ig>
09:04:35 INFO    : 	<Aggregate al2s>
09:04:35 INFO    : Stitcher doing createsliver at <Aggregate ulla-ig>...
09:04:54 INFO    : ... Allocation at <Aggregate ulla-ig> complete.
09:04:54 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:05:15 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:05:15 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:05:23 INFO    : ... Allocation at <Aggregate al2s> complete.
09:05:23 INFO    : All aggregates are complete.
09:05:23 INFO    : Your resources expire at 2017-06-25T12:54:35 (UTC). 
09:05:23 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-1-manifest-rspec-multiam-combined.xml'

Determined login information at each ULLafayette and GPO aggregate:

$ readyToLogin.py IG-ST-1a --useSliceAggregates
  ....

ig-ulla's geni_status is: ready 
User lnevers logs in to ig-ulla using:
        ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu


ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

....NO IP CONNECTIVITY....05/09, 05/26

Measurements

Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-06-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   575 MBytes  80.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   153 MBytes  21.3 Mbits/sec
[  4]  0.0-60.1 sec   133 MBytes  18.5 Mbits/sec
[  5]  0.0-60.1 sec   131 MBytes  18.3 Mbits/sec
[  7]  0.0-60.1 sec   129 MBytes  18.0 Mbits/sec
[  6]  0.0-60.1 sec   119 MBytes  16.5 Mbits/sec
[SUM]  0.0-60.1 sec   664 MBytes  92.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.0 sec  72.2 MBytes  10.1 Mbits/sec
[ 10]  0.0-60.0 sec  68.5 MBytes  9.57 Mbits/sec
[ 12]  0.0-60.1 sec  69.0 MBytes  9.64 Mbits/sec
[  4]  0.0-60.1 sec  64.8 MBytes  9.04 Mbits/sec
[  3]  0.0-60.2 sec  61.4 MBytes  8.55 Mbits/sec
[  9]  0.0-60.2 sec  62.0 MBytes  8.64 Mbits/sec
[  5]  0.0-60.2 sec  66.0 MBytes  9.19 Mbits/sec
[  6]  0.0-60.3 sec  63.4 MBytes  8.82 Mbits/sec
[ 11]  0.0-60.3 sec  78.5 MBytes  10.9 Mbits/sec
[  7]  0.0-60.3 sec  67.1 MBytes  9.34 Mbits/sec
[SUM]  0.0-60.3 sec   673 MBytes  93.7 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512816 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   691 MBytes  96.5 Mbits/sec   0.023 ms 20228/512815 (3.9%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI ULLafayette VM

60 packets transmitted, 60 received, 0% packet loss, time 59076ms
rtt min/avg/max/mdev = 47.994/48.246/50.873/0.470 ms

Iperf InstaGENI ULLafayette VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-06-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec   598 MBytes  83.4 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   110 MBytes  15.4 Mbits/sec
[  3]  0.0-60.1 sec  93.1 MBytes  13.0 Mbits/sec
[  6]  0.0-60.1 sec   269 MBytes  37.6 Mbits/sec
[  4]  0.0-60.1 sec   118 MBytes  16.4 Mbits/sec
[  7]  0.0-60.2 sec  84.5 MBytes  11.8 Mbits/sec
[SUM]  0.0-60.2 sec   674 MBytes  94.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.0 sec  70.6 MBytes  9.87 Mbits/sec
[  5]  0.0-60.0 sec  71.5 MBytes  9.99 Mbits/sec
[  7]  0.0-60.0 sec  71.8 MBytes  10.0 Mbits/sec
[  4]  0.0-60.0 sec  59.6 MBytes  8.33 Mbits/sec
[  9]  0.0-60.1 sec  71.2 MBytes  9.94 Mbits/sec
[ 11]  0.0-60.1 sec  59.2 MBytes  8.27 Mbits/sec
[  3]  0.0-60.2 sec  70.2 MBytes  9.79 Mbits/sec
[ 12]  0.0-60.2 sec  64.4 MBytes  8.97 Mbits/sec
[  6]  0.0-60.2 sec  75.8 MBytes  10.5 Mbits/sec
[  8]  0.0-60.3 sec  61.6 MBytes  8.58 Mbits/sec
[SUM]  0.0-60.3 sec   676 MBytes  94.1 Mbits/sec

Iperf InstaGENI ULLafayette VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512816 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   692 MBytes  96.7 Mbits/sec   0.016 ms 19538/512815 (3.8%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI ULLafayette VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59072ms
rtt min/avg/max/mdev = 48.045/48.161/48.595/0.243 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
09:44:34 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2017-06-26 13:44:33 UTC
09:44:34 INFO    : Calling SCS...
09:44:35 INFO    : Multi-AM reservation will include resources from these aggregates:
09:44:35 INFO    : 	<Aggregate ulla-ig>
09:44:35 INFO    : 	<Aggregate gpo-ig>
09:44:35 INFO    : 	<Aggregate al2s>
09:44:35 INFO    : Stitcher doing createsliver at <Aggregate ulla-ig>...
09:44:58 INFO    : ... Allocation at <Aggregate ulla-ig> complete.
09:44:58 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:45:18 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:45:18 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:45:32 INFO    : ... Allocation at <Aggregate al2s> complete.
09:45:32 INFO    : All aggregates are complete.
09:45:32 INFO    : Your resources expire at 2017-06-25T13:34:35 (UTC). 
09:45:32 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each ULLafayette and GPO aggregate:

$ readyToLogin.py IG-ST-2 --useSliceAggregates
 ....
ig-ulla's geni_status is: ready 
User lnevers logs in to ig-ulla using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.louisiana.edu

ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25298  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2x
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59067ms
rtt min/avg/max/mdev = 47.992/48.893/96.224/6.167 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59014ms
rtt min/avg/max/mdev = 47.930/49.009/96.294/6.182 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
09:50:14 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:50:14 INFO    : Reading slice IG-ST-3 credential...
09:50:14 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2017-06-26 13:50:14 UTC
09:50:14 INFO    : Calling SCS...
09:50:17 INFO    : Multi-AM reservation will include resources from these aggregates:
09:50:17 INFO    : 	<Aggregate ulla-ig>
09:50:17 INFO    : 	<Aggregate gpo-ig>
09:50:17 INFO    : 	<Aggregate al2s>
09:50:17 INFO    : 	<Aggregate uwashington-ig>
09:50:17 INFO    : Stitcher doing createsliver at <Aggregate ulla-ig>...
09:50:40 INFO    : ... Allocation at <Aggregate ulla-ig> complete.
09:50:40 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:51:00 ERROR   :  {'output': "*** SetNodeHistory: No control interface for [Node: interconnect-poblanovm-6]\n*** WARNING: mapper:\n***   DB Query failed:\n***     Query: insert into interface_state set   node_id='pcvm5-2',   card=0, port=1, iface='eth0'\n***     Error: Duplicate entry 'pcvm5-2-0-1' for key 1 (1062)\n*** CreateVnodes: Could not create interface for pcvm5-2\n*** ERROR: mapper: Could not allocate vnodes on pc5\n*** ERROR: mapper: Could not allocate virtual nodes\n*** ERROR: mapper: Unretriable error. Giving up.\n*** ERROR: mapper: 1 warnings.\n", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+ccacc0d7bf93f99e64c104504c2e8e1f', 'am_type': 'protogeni', 'geni_code': 2, 'am_code': 28, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=ccacc0d7bf93f99e64c104504c2e8e1f'}, 'value': 'Could not map to resources'}
09:51:00 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate gpo-ig> (AMAPIError: Error from Aggregate: code 2. protogeni AM code: 28: *** SetNodeHistory: No control interface for [Node: interconnect-poblanovm-6]
*** WARNING: mapper:
***   DB Query failed:
***     Query: insert into interface_state set   node_id='pcvm5-2',   card=0, port=1, iface='eth0'
***     Error: Duplicate entry 'pcvm5-2-0-1' for key 1 (1062)
*** CreateVnodes: Could not create interface for pcvm5-2
*** ERROR: mapper: Could not allocate vnodes on pc5
*** ERROR: mapper: Could not allocate virtual nodes
*** ERROR: mapper: Unretriable error. Giving up.
*** ERROR: mapper: 1 warnings.
.). Try again from the SCS
09:51:00 INFO    : Deleting existing reservations...
09:51:00 INFO    : Doing deletesliver at <Aggregate ulla-ig>...
09:51:03 INFO    : Deleted reservation at <Aggregate ulla-ig>.
09:51:03 INFO    : Calling SCS for the 2nd time...
09:51:03 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


09:51:33 INFO    : Multi-AM reservation will include resources from these aggregates:
09:51:33 INFO    : 	<Aggregate ulla-ig>
09:51:33 INFO    : 	<Aggregate gpo-ig>
09:51:33 INFO    : 	<Aggregate al2s>
09:51:33 INFO    : 	<Aggregate uwashington-ig>
09:51:33 INFO    : Stitcher doing createsliver at <Aggregate ulla-ig>...
09:51:56 INFO    : ... Allocation at <Aggregate ulla-ig> complete.
09:51:56 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:52:14 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:52:14 INFO    : Stitcher doing createsliver at <Aggregate uwashington-ig>...
09:52:37 INFO    : ... Allocation at <Aggregate uwashington-ig> complete.
09:52:37 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:52:45 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3718', 'code': {'geni_code': 24}}
09:52:45 INFO    : Deleting some reservations to retry, avoiding failed VLAN...
09:52:45 INFO    : Doing deletesliver at <Aggregate gpo-ig>...
09:54:16 ERROR   :  {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+ccf919fcca89cc6691f88b1c203d0c17', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=ccf919fcca89cc6691f88b1c203d0c17'}, 'value': 0}
09:54:26 INFO    :  ... aggregate was busy, will retry ...
09:55:11 INFO    :  ... done.
09:55:11 INFO    : Will put <Aggregate al2s> back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at <Aggregate al2s>....
09:55:11 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


09:55:41 INFO    : Checking that prior reservation at <Aggregate gpo-ig> has been cleared up....
09:55:43 ERROR   :  {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+3587969c16fb07f29dc1b83303e49170', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=3587969c16fb07f29dc1b83303e49170'}, 'value': 0}
09:55:43 INFO    : ... it is, so can try a new reservation.
09:55:43 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:56:23 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:56:23 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:56:37 INFO    : ... Allocation at <Aggregate al2s> complete.
09:56:37 INFO    : All aggregates are complete.
09:56:37 INFO    : Your resources expire at 2017-06-25T13:41:33 (UTC). 
09:56:37 INFO    : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the ULLafayette host:

$ readyToLogin.py IG-ST-3 --useSliceAggregates
....
ig-ulla's geni_status is: ready 
User lnevers logs in to ig-ulla using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu

ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

ig-wash's geni_status is: ready 
User lnevers logs in to ig-wash using:
	ssh -p 25074  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.washington.edu

Login to the ULLafayette host and ping each remote:

#ping GPO IG 

lnevers@ig-ulla:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59071ms
rtt min/avg/max/mdev = 48.002/48.935/96.357/6.176 ms
lnevers@ig-ulla:~$

# Washington IG

lnevers@ig-ulla:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 67.794/69.061/135.858/8.703 ms
lnevers@ig-ulla:~$ 

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. Note "--defaultCapacity=100000" was used to get around the ExoGENI bug where request fails if no link speed is specified.

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o --defaultCapacity=100000
10:06:48 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
10:06:48 INFO    : Reading slice IG-ST-4 credential...
10:06:48 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2017-06-26 14:06:47 UTC
10:06:48 INFO    : Calling SCS...
10:06:49 INFO    : Multi-AM reservation will include resources from these aggregates:
10:06:49 INFO    : 	<Aggregate ulla-ig>
10:06:49 INFO    : 	<Aggregate al2s>
10:06:49 INFO    : 	<Aggregate gpo-eg>
10:06:49 INFO    : Stitcher doing createsliver at <Aggregate ulla-ig>...
10:07:11 INFO    : ... Allocation at <Aggregate ulla-ig> complete.
10:07:11 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
10:07:21 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
10:07:21 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
10:07:29 INFO    : ... Allocation at <Aggregate al2s> complete.
10:07:29 INFO    : All aggregates are complete.
10:07:29 INFO    : Your resources expire at 2017-06-25T13:56:49 (UTC). 
10:07:29 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each ULLafayette and GPO aggregate:

$ readyToLogin.py IG-ST-4 --useSliceAggregates

eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.9

ig-ulla's geni_status is: ready 
User lnevers logs in to ig-ulla using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu

Measurements

Iperf ExoGENI GPO VM to InstaGENI ULLafayette VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-06-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   498 MBytes  69.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec   125 MBytes  17.5 Mbits/sec
[  4]  0.0-60.0 sec   141 MBytes  19.7 Mbits/sec
[  5]  0.0-60.1 sec   147 MBytes  20.6 Mbits/sec
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec
[  6]  0.0-60.2 sec   132 MBytes  18.4 Mbits/sec
[SUM]  0.0-60.2 sec   685 MBytes  95.5 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.0 sec  68.2 MBytes  9.54 Mbits/sec
[  6]  0.0-60.0 sec  78.2 MBytes  10.9 Mbits/sec
[  5]  0.0-60.0 sec  75.2 MBytes  10.5 Mbits/sec
[  7]  0.0-60.1 sec  72.4 MBytes  10.1 Mbits/sec
[  8]  0.0-60.1 sec  69.1 MBytes  9.65 Mbits/sec
[  9]  0.0-60.2 sec  61.9 MBytes  8.63 Mbits/sec
[  3]  0.0-60.2 sec  65.6 MBytes  9.15 Mbits/sec
[ 12]  0.0-60.2 sec  73.0 MBytes  10.2 Mbits/sec
[  4]  0.0-60.2 sec  65.2 MBytes  9.09 Mbits/sec
[ 11]  0.0-60.4 sec  58.9 MBytes  8.17 Mbits/sec
[SUM]  0.0-60.4 sec   688 MBytes  95.5 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   696 MBytes  97.1 Mbits/sec   0.010 ms 16333/512820 (3.2%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI ULLafayette VM

60 packets transmitted, 60 received, 0% packet loss, time 59071ms
rtt min/avg/max/mdev = 47.893/48.095/50.512/0.427 ms

Iperf InstaGENI ULLafayette VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-06-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   412 MBytes  57.4 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  90.5 MBytes  12.7 Mbits/sec
[  3]  0.0-60.0 sec  96.8 MBytes  13.5 Mbits/sec
[  6]  0.0-60.1 sec   133 MBytes  18.6 Mbits/sec
[  5]  0.0-60.1 sec  98.1 MBytes  13.7 Mbits/sec
[  4]  0.0-60.8 sec   227 MBytes  31.4 Mbits/sec
[SUM]  0.0-60.8 sec   646 MBytes  89.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  65.8 MBytes  9.19 Mbits/sec
[  6]  0.0-60.1 sec  65.2 MBytes  9.11 Mbits/sec
[ 10]  0.0-60.1 sec  60.5 MBytes  8.45 Mbits/sec
[  5]  0.0-60.1 sec  66.8 MBytes  9.32 Mbits/sec
[  8]  0.0-60.1 sec  66.0 MBytes  9.21 Mbits/sec
[ 12]  0.0-60.1 sec  72.9 MBytes  10.2 Mbits/sec
[  3]  0.0-60.1 sec  74.8 MBytes  10.4 Mbits/sec
[  9]  0.0-60.2 sec  65.4 MBytes  9.11 Mbits/sec
[  4]  0.0-60.3 sec  83.4 MBytes  11.6 Mbits/sec
[ 11]  0.0-60.3 sec  52.9 MBytes  7.35 Mbits/sec
[SUM]  0.0-60.3 sec   674 MBytes  93.7 Mbits/sec

Iperf InstaGENI ULLafayette VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512813 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   691 MBytes  96.6 Mbits/sec   0.019 ms 19774/512812 (3.9%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI ULLafayette VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59072ms
rtt min/avg/max/mdev = 47.922/48.187/50.663/0.593 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the ULLafayette Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs reviewed. No longer possible
  1. Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
15:34:38 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
15:34:38 INFO    : Reading slice IG-ST-6 credential...
15:34:38 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2017-06-26 19:34:37 UTC
15:34:38 INFO    : Calling SCS...
15:34:39 INFO    : Multi-AM reservation will include resources from these aggregates:
15:34:39 INFO    : 	<Aggregate ulla-ig>
15:34:39 INFO    : 	<Aggregate gpo-ig>
15:34:39 INFO    : 	<Aggregate al2s>
15:34:39 INFO    : Stitcher doing createsliver at <Aggregate ulla-ig>...
15:35:01 INFO    : ... Allocation at <Aggregate ulla-ig> complete.
15:35:02 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:35:18 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:35:18 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
15:35:21 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3731', 'code': {'geni_code': 24}}
15:35:21 INFO    : Deleting some reservations to retry, avoiding failed VLAN...
15:35:21 INFO    : Doing deletesliver at <Aggregate gpo-ig>...
15:36:28 INFO    : Will put <Aggregate al2s> back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at <Aggregate al2s>....
15:36:28 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


15:36:58 INFO    : Checking that prior reservation at <Aggregate gpo-ig> has been cleared up....
15:37:46 ERROR   :  {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+d4e842cf9d3ca184364d5f6b6d4888fa', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=d4e842cf9d3ca184364d5f6b6d4888fa'}, 'value': 0}
15:37:46 INFO    : ... it is, so can try a new reservation.
15:37:46 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:38:06 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:38:06 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
15:38:14 INFO    : ... Allocation at <Aggregate al2s> complete.
15:38:14 INFO    : All aggregates are complete.
15:38:14 INFO    : Your resources expire at 2017-06-25T19:24:39 (UTC). 
15:38:14 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-6-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each ULLafayette and GATech aggregate:

$ readyToLogin.py IG-ST-6 --useSliceAggregates

ig-ulla's geni_status is: ready 
User lnevers logs in to ig-ulla using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu

ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25042  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-06-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec   138 MBytes  19.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec  30.4 MBytes  4.23 Mbits/sec
[  6]  0.0-60.4 sec  26.9 MBytes  3.73 Mbits/sec
[  4]  0.0-60.5 sec  25.4 MBytes  3.52 Mbits/sec
[  7]  0.0-60.5 sec  29.1 MBytes  4.04 Mbits/sec
[  5]  0.0-60.6 sec  25.6 MBytes  3.55 Mbits/sec
[SUM]  0.0-60.6 sec   137 MBytes  19.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-59.4 sec  16.6 MBytes  2.35 Mbits/sec
[  9]  0.0-59.7 sec  13.2 MBytes  1.86 Mbits/sec
[  4]  0.0-59.7 sec  13.6 MBytes  1.91 Mbits/sec
[  8]  0.0-59.7 sec  13.8 MBytes  1.93 Mbits/sec
[ 12]  0.0-60.1 sec  11.8 MBytes  1.64 Mbits/sec
[  3]  0.0-60.2 sec  12.6 MBytes  1.76 Mbits/sec
[  6]  0.0-60.2 sec  13.6 MBytes  1.90 Mbits/sec
[  5]  0.0-60.4 sec  16.5 MBytes  2.29 Mbits/sec
[ 10]  0.0-60.6 sec  13.2 MBytes  1.83 Mbits/sec
[ 11]  0.0-60.6 sec  13.9 MBytes  1.92 Mbits/sec
[SUM]  0.0-60.6 sec   139 MBytes  19.2 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512816 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  13.869 ms 413578/512815 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI ULLafayette VM

60 packets transmitted, 60 received, 0% packet loss, time 59069ms
rtt min/avg/max/mdev = 47.958/48.088/48.328/0.162 ms

Iperf InstaGENI ULLafayette VM to InstaGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-06-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   137 MBytes  19.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  27.6 MBytes  3.86 Mbits/sec
[  6]  0.0-60.2 sec  27.4 MBytes  3.82 Mbits/sec
[  4]  0.0-60.2 sec  29.1 MBytes  4.06 Mbits/sec
[  5]  0.0-60.4 sec  27.5 MBytes  3.82 Mbits/sec
[  7]  0.0-60.6 sec  27.2 MBytes  3.77 Mbits/sec
[SUM]  0.0-60.6 sec   139 MBytes  19.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.5 sec  14.6 MBytes  2.03 Mbits/sec
[  3]  0.0-60.6 sec  16.8 MBytes  2.32 Mbits/sec
[ 12]  0.0-60.8 sec  12.8 MBytes  1.76 Mbits/sec
[  4]  0.0-60.8 sec  13.6 MBytes  1.88 Mbits/sec
[  6]  0.0-60.9 sec  13.6 MBytes  1.88 Mbits/sec
[ 10]  0.0-61.0 sec  12.2 MBytes  1.69 Mbits/sec
[  7]  0.0-61.0 sec  14.9 MBytes  2.05 Mbits/sec
[  9]  0.0-61.0 sec  13.8 MBytes  1.89 Mbits/sec
[ 11]  0.0-61.0 sec  14.4 MBytes  1.98 Mbits/sec
[  8]  0.0-61.0 sec  12.9 MBytes  1.77 Mbits/sec
[SUM]  0.0-61.0 sec   140 MBytes  19.2 Mbits/sec

Iperf InstaGENI ULLafayette VM to InstaGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512815 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.143 ms 413662/512814 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI ULLafayette VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59069ms
rtt min/avg/max/mdev = 47.836/48.003/48.070/0.042 ms

Email help@geni.net for GENI support or email me with feedback on this page!

Attachments (3)

Download all attachments as: .zip