Changes between Version 1 and Version 2 of GENIRacksHome/OpenGENIRacks/AcceptanceTestStatusApr2014/OG-MON-1

Timestamp:

05/23/14 12:51:22 (10 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIRacksHome/OpenGENIRacks/AcceptanceTestStatusApr2014/OG-MON-1

@@ -1 @@
-= GR-MON-1: Control Network Software and VLAN Inspection Test =
-
-This page captures status for the test case GR-MON-1. For additional information see the [wiki:GENIRacksHome/GRAMRacks/AcceptanceTestStatusApr2014 Acceptance Test Status - April 2014] page overall status, or the [wiki:GENIRacksHome/AcceptanceTests/GRAMAcceptanceTestsPlan GRAM Acceptance Test Plan] for details about the planned evaluation.
+= OG-MON-1: Control Network Software and VLAN Inspection Test =
+
+This page captures status for the test case OG-MON-1. For additional information see the [wiki:GENIRacksHome/OpenGENIRacks/AcceptanceTestStatusApr2014 Acceptance Test Status - April 2014] page overall status, or the [wiki:GENIRacksHome/AcceptanceTests/OpenGENIAcceptanceTestsPlan OpenGENI Acceptance Test Plan] for details about the planned evaluation.
 
 || '''Step''' || '''State'''||''' Notes '''            || '''Tickets'''  ||
@@ -66 +66 @@
 }}}
 
-the following are major services for GRAM:
+the following are major services for OpenGENI:
  - ''gram-am'' - the aggregate manager that handles AM API calls for resources
  - ''gram-vnoc'' - VMOC controller that manages OpenFlow traffic for switch(es) and experimenter controller(s).  
@@ -72 +72 @@
  - ''gram-mon''- Data collection, not sure how it fits in to current plan.
 
-On the Clemson rack, the GRAM software is installed in /home/gram/gram on the control node named "clemson-clemson-control-1" (130.127.88.98) and the GRAM services listed above are started by scripts in the /home/gram/gram/src/services directory:
+On the Clemson rack, the OpenGENI software is installed in /home/gram/gram on the control node named "clemson-clemson-control-1" (130.127.88.98) and the OpenGENI services listed above are started by scripts in the /home/gram/gram/src/services directory:
 {{{
 $ ls -ltr /home/gram/gram/src/services
@@ -152 +152 @@
 }}}
 
-Additionally GRAM software configuration is captured on the control node: 
+Additionally OpenGENI software configuration is captured on the control node: 
 {{{
 $ more  /etc/gram/config.json 
 {
-   "__001": "This file contains GRAM installation-specific", 
+   "__001": "This file contains OpenGENI installation-specific", 
    "__002": "parameters and structures. The values contained here",
    "__003": "override values in the gram.am.gram.config module.",
@@ -292 +292 @@
 == Step 2. Review control network configuration ==
 
-A site administrator reviews the configuration of the rack control plane switch and verifies that each experimental node's control and console access interfaces are on the expected VLANs.  According to [https://superior.bbn.com/trac/bbn-rack/wiki/ClemsonRackDetails Details on Clemson GRAM Rack Installation and Configuration] document interfaces are configured as follows on the GRAM nodes: 
+A site administrator reviews the configuration of the rack control plane switch and verifies that each experimental node's control and console access interfaces are on the expected VLANs.  According to [https://superior.bbn.com/trac/bbn-rack/wiki/ClemsonRackDetails Details on Clemson OpenGENI Rack Installation and Configuration] document interfaces are configured as follows on the OpenGENI nodes: 
     - eth0: Control network configured for 10.10.8.0
     - eth1 : Data plane network configured for 10.10.5.0