InstaGENI Racks Project

The InstaGENI Racks address the GENI Rack Requirements and follow the process below to deliver experimenter resources:

InstaGENI Design

An InstaGENI Design document version has been made available:

​InstaGENI Design Document

Initial version before InstaGENI design review

In response to the proposed design the following were discussed on the mail list ​instageni-design@geni.net:

• InstaGENI Use Cases - Nine Use Cases were submitted for discussion in the design review, discussions are captured in this page.
  
• InstaGENI Open Questions - Page capturing InstaGENI design question discussed at Design meeting and on the mail list.

During this phase, periodic InstaGENI aggregate surveys are conducted and results are captured here.

InstaGENI Links

• ​InstaGENI Project page

Acceptance Test Plans

Although GENI Rack Requirements are the same for each of the GENI rack projects, a separate acceptance test plan is defined for InstaGENI Racks based on the InstaGENI Use Cases:

• InstaGENI System Acceptance Tests

GPO Status and Reports

Various pages are generated by the GPO to capture:

• InstaGENI Aggregate Surveys - This page capture initial testing including the following: a simple 2 node experiment, AM API Acceptance test results and the GPO Development Analysis of the results.
• InstaGENI Acceptance Test Status - This page will capture test status updates as the InstaGENI Acceptance Tests are executed.
• InstaGENI Acceptance Test Report - Upon project completion, this page will capture all test findings, configurations used, unresolved issues, etc.

---

Email help@geni.net for GENI support or email me with feedback on this page!