University of Utah Stitch Aggregate Operational Data

This page captures information that is intended for Operators. The goal is to capture site contacts, connectivity, and VLANs.

Contacts

Site contact information.

Contact Name: Robert Ricci Contact Email: ​ricci@cs.utah.edu Also ​instageni-ops@flux.utah.edu

---

Data Plane

This section captures Data plane information for detailing site topology, VLAN, Network Providers (I2/Regional) and network address information. Additional site which is not specified, but deemed important, can also be captured here.

Data plane connectivity diagram

Port numbers for this drawing have been requested.

Layer 2 information

*In the VLAN column, a single ID indicates that the port is an access port. A T followed by one or more IDs indicates that the port is a trunk (aka tagged) port with those VLAN IDs.

Rack Data Plane 5406

Port	Connects To	VLAN Config*
A23
A24	XXX	vlan XXX

VLAN 1750, GENI BACKBONE On Ramp: NLR.CHIC Te 7/4

Project based VLANs to XXX

Layer 3 information

NONE

Experimental VLANs

VLAN ID	OF Controlled?	Purpose
XXX

VLAN Translation Table

Project based VLAN translations provisioned as needed.

Non-VLAN Connections

NONE

Campus Connections

The "campus" connections actually span several locations associated with the University of Utah, but not all on one campus.

There are 6 connections shown in the diagram above, and others expected to UEN and at least one Utah location (a dorm) in the near future.

Public Internet

via Internet2

---

Control Plane

This section captures control plane information for Utah-stitch.

Control plane connectivity diagram

Resource control subnets

IP addresses: 192.XXX.XXX.XXX

DNS: XXX

Firewall/IP tables

unknown

---

Experiment Resources

This aggregate does not currently support OpenFlow.

Links to resource and network aggregates available for experimenters for Utah-stitch:

• ​http://groups.geni.net/geni/wiki/GeniAggregate/UtahStitch