Changes between Version 38 and Version 39 of GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-MON-3

Timestamp:

03/06/13 12:33:55 (11 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-MON-3

@@ -741 +741 @@
 For each of the above experiment clicking on the topology diagram on the left hand side panel will result in a details page that includes specific configuration and allocation for the experiment.
 
-Clicking on the topology for the experiment IG-MON-3 (2 raw pc experiment)  show:
+Clicking on the topology diagram for the experiment IG-MON-3 (2 raw pc experiment), this  shows node mapping, IP Port allocation, and other useful information:
 
 [[Image(IG-MON-3-2pc-detail.jpg)]]
 
-The above shows node mapping, IP Port allocation, and other useful information.
-
-
-For the OpenFlow experiment, the 
-
-{{{
-  { 'attributes':
-    { 'client_id': 'phys1:if0',
-      'component_id': 'urn:publicid:IDN+utah.geniracks.net+interface+pc3:eth1',
-      'mac_address': 'e83935b14e8a',
-...
-  { 'attributes':
-    { 'client_id': 'virt1:if0',
-      'component_id': 'urn:publicid:IDN+utah.geniracks.net+interface+pc5:eth1',
-      'mac_address': '00000a0a0102',
-}}}
-   * So i think it should be possible for the admin interface to know that virtual mac address too.
-   * Huh, but also, that mac address reported in sliverstatus is in fact wrong.  Let me summarize:
-{{{
-MAC addrs reported for phys1:0 == 10.10.1.1
-  E8:39:35:B1:4E:8A: from /sbin/ifconfig eth1 run on phys1 (authoritative)
-  e83935b14e8a:      from sliverstatus as experimenter (correct)
-  e8:39:35:b1:4e:8a: from: https://boss.utah.geniracks.net/showexp.php3?experiment=363#details (correct)
-
-MAC addrs reported for virt1:0 == 10.10.1.2
-  82:01:0A:0A:01:02: from /sbin/ifconfig mv1.1 run on virt1 (authoritative)
-  00000a0a0102:      from sliverstatus as experimenter (incorrect: first four digits are wrong)
-  -                : from https://boss.utah.geniracks.net/showexp.php3?experiment=363#details (not reported)
-}}}
-   I opened [instaticket:26] for this issue.
+For the experiment IG-MON-3-OF (2 VM !OpenFlow experiment), click the topology diagram and the experiment topology along with the experiment details for Virtual Nodes, Physical Nodes Mapping, Port Allocation, Virtual Links, Physical Links, Links Mappings, and VLAN settings are shown:
+
+[[Image(IG-MON-3-2vm-of-detail.jpg)]] 
+
+[[BR]]
+
+Compared the MAC addresses show on this page with the ones collected in earlier steps from logging into the experiment nodes and found them to be the same.
+
+
+}}}
+
+As administrator, log into the OpenVZ host pc2.instageni.gpolab.bbn.com
+
+
+
+
+
+
  * Now, use the OpenVZ host itself to view activity:
    * As an admin, login to pc5.utah.geniracks.net