Changes between Version 7 and Version 8 of GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5

Timestamp:

07/03/12 14:26:00 (12 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5

@@ -110 +110 @@
 The OF core resources for VLAN 3716 were defined as follows:
  
- * IG-EXP-5-openflow-i2.rspec = Internet2 Core FOAM Aggregate network resources request RSpec. 
+ * IG-EXP-5-openflow-i2.rspec - Internet2 Core FOAM Aggregate network resources request RSpec. 
  * IG-EXP-5-openflow-nlr.rspec - NLR Core FOAM Aggregate network resources request RSpec.
 
@@ -192 +192 @@
 
 == 12. Verify that traffic is delivered to target ==
+Ping traffic was successfully exchange between each compute resource reserved,
+
 == 13. Review baseline, GMOC, and meso-scale monitoring statistics  ==
+No monitoring data available for InstaGENI rack at this time.  Will revisit after GEC14.
 
 == 14. As Experimenter2, determine BBN compute resources and define RSpec ==
@@ -198 +201 @@
 
 == 15. Determine remote meso-scale NLR compute resources and define RSpec ==
-Created slivers at Internet2 and NLR FOAM network resource aggregate:
+
+NLR OpenFlow Rspec was defined in step 5.
+
+== 16. Define a request RSpec for !OpenFlow network resources at the BBN InstaGENI AM ==
+
+For the initial run which combined the two experiments, these steps were completed above
+in step 9.
+
+== 17. Define a request RSpec for !OpenFlow network resources at the remote NLR Meso-scale site ==
+
+== 18. Define a request RSpec for the !OpenFlow Core resources ==
+Created sliver at NLR and Internet2 FOAM network resource aggregates:
 {{{ 
 omni.py -a of-i2 createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-i2.rspec 
@@ -204 +218 @@
 }}}
 
-== 16. Define a request RSpec for !OpenFlow network resources at the BBN InstaGENI AM ==
-
-== 17. Define a request RSpec for !OpenFlow network resources at the remote NLR Meso-scale site ==
-
-== 18. Define a request RSpec for the !OpenFlow Core resources ==
-
 == 19. Create the second slice ==
+For the initial run which combined the two experiments, there is no second slice.
 
 == 20. Create a sliver for the BBN compute resources ==
+See step 10a.
 
 == 21. Create a sliver at the meso-scale site using FOAM at site ==
+See step 10a.
 
 == 22. Create a sliver at of the BBN InstaGENI AM ==
 
+See step 9.
+
 == 23. Create a sliver for the !OpenFlow resources in the core ==
 
+See step 10.
+
 == 24. Create a sliver for the meso-scale compute resources ==
 
+See step 10a.
+
 == 25. Log in to each of the compute resources and send traffic to the other endpoint ==
 
+Was able to exchange ping traffic between each of the compute resources.
+
 == 26. As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers ==
 
+Nox controller with support for flow-mods available after GEC14.
+
 == 27. Verify that traffic is delivered to target according to the flowmods settings ==
+See step 26.
 
 == 28. Review baseline, GMOC, and monitoring statistics ==
 
+Reviewed impact of this experiment on available monitoring at:
+
+  http://monitor.gpolab.bbn.com/vlans/
+
+ 
 == 29. Stop traffic and delete slivers ==
+
+Stopped traffic to review statistics, but did not delete slivers, trying to run experiment as long as possible before GEC14.