Changes between Version 5 and Version 6 of GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5


Ignore:
Timestamp:
07/03/12 10:41:53 (12 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5

    v5 v6  
    1717|| Step 7     ||[[Color(yellow,Complete)]] ||                         ||               ||               
    1818|| Step 8     ||[[Color(yellow,Complete)]] ||                         ||               ||               
    19 || Step 9     ||                      ||                         ||               ||               
    20 || Step 10    ||                      ||                         ||               ||               
    21 || Step 11    ||                      ||                         ||               ||               
     19|| Step 9     ||[[Color(yellow,Complete)]] ||                         ||               ||               
     20|| Step 10    ||[[Color(yellow,Complete)]] ||                         ||               ||               
     21|| Step 11    ||[[Color(yellow,Complete)]] ||                         ||               ||               
    2222|| Step 12    ||                       ||                         ||               ||               
    2323|| Step 13    ||                       ||                         ||               ||               
     
    7171}}}
    7272
    73 == 1. As Experimenter1, Determine BBN compute resources and define RSpec.==
     73== 1. As Experimenter1, Determine BBN compute resources and define RSpec ==
    7474Collect list resources from InstaGENI compute and network aggregate managers.
    7575{{{
     
    8080}}}
    8181
    82 == 2. Determine remote meso-scale compute resources and define RSpec. ==
     82== 2. Determine remote meso-scale compute resources and define RSpec ==
    8383Rspec defined for the meso-scale sites, there are 3 meso-scale sites:
    8484
     
    8787   - 1 MyPLC node (navis.gpolab.bbn.com) at BBN Site Via NLR
    8888
    89 == 3. Define a request RSpec for !OpenFlow network resources at the BBN InstaGENI AM.==
     89== 3. Define a request RSpec for !OpenFlow network resources at the BBN InstaGENI AM ==
    9090
    9191Defined the RSpec for the Utah !OpenFlow switch in the ExoGENI rack to the core VLAN 3716.
     
    9595 * IG-EXP-5-compute-pg.rspec - Utah ProtoGENI FOAM Aggregate Network resources request Rspec.
    9696
    97 == 4. Define a request RSpec for !OpenFlow network resources at the remote I2 Meso-scale site. ==
     97== 4. Define a request RSpec for !OpenFlow network resources at the remote I2 Meso-scale site ==
    9898An RSpec was defined for each site FOAM aggregate and compute resources aggregate.  The following RSpec were used for the meso-scale sites:
    9999  * IG-EXP-5-wapg-rutgers.rspec - Rutgers WAPG nodes pg51 compute resource request RSpec.
     
    118118omni.py createslice IG-EXP-5
    119119}}}
    120 == 7. Create a sliver for the BBN compute resources. ==
     120== 7. Create a sliver for the BBN compute resources ==
    121121Created slivers at:
    122122 - PG Utah compute resource aggregate
     
    125125omni.py -a pg createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-compute-pg.rspec
    126126}}}
    127 == 8. Create a sliver at the I2 meso-scale site using FOAM at site. ==
     127== 8. Create a sliver at the I2 meso-scale site using FOAM at site ==
    128128Created a sliver at the Rutgers FOAM for VLAN 3716:
    129129{{{
     
    131131
    132132}}}
    133 == 9. Create a sliver at of the BBN InstaGENI AM. ==
     133== 9. Create a sliver at of the BBN InstaGENI AM ==
    134134Created slivers at:
    135135 - InstaGENI rack compute resource aggregate
     
    147147}}}
    148148
    149 == 10. Create a sliver for the !OpenFlow resources in the core. ==
     149== 10. Create a sliver for the !OpenFlow resources in the core ==
    150150
    151151Created slivers at Internet2 and NLR FOAM network resource aggregate:
     
    155155}}}
    156156
    157 == 10a. Create a sliver for all remaining Meso-scale compute and network resources. ==
     157== 10a. Create a sliver for all remaining Meso-scale compute and network resources ==
    158158The following slivers were created:
    159159{{{
     
    166166}}}
    167167
    168 == 11. Log in to each of the compute resources and send traffic to the other end-point. ==
     168== 11. Log in to each of the compute resources and send traffic to the other end-point ==
    169169The nodes assigned for compute resources were determined as follows:
    170170{{{
     
    191191}}}
    192192
    193 == 12. Verify that traffic is delivered to target.==
    194 == 13. Review baseline, GMOC, and meso-scale monitoring statistics. ==
    195 
    196 == 14. As Experimenter2, determine BBN compute resources and define RSpec.==
     193== 12. Verify that traffic is delivered to target ==
     194== 13. Review baseline, GMOC, and meso-scale monitoring statistics  ==
     195
     196== 14. As Experimenter2, determine BBN compute resources and define RSpec ==
    197197Note: for initial run through of this test only one set of credentials were used
    198198
    199 == 15. Determine remote meso-scale compute resources and define RSpec. ==
    200 
    201  16. Define a request RSpec for !OpenFlow network resources at the BBN InstaGENI AM.
    202  17. Define a request RSpec for !OpenFlow network resources at the remote NLR Meso-scale site.
    203  18. Define a request RSpec for the !OpenFlow Core resources
    204  19. Create the second slice
    205  20. Create a sliver for the BBN compute resources.
    206  21. Create a sliver at the meso-scale site using FOAM at site.
    207  22. Create a sliver at of the BBN InstaGENI AM.
    208  23. Create a sliver for the !OpenFlow resources in the core.
    209  24. Create a sliver for the meso-scale compute resources.
    210  25. Log in to each of the compute resources and send traffic to the other endpoint.
    211  26. As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers.
    212  27. Verify that traffic is delivered to target according to the flowmods settings.
    213  28. Review baseline, GMOC, and monitoring statistics.
    214  29. Stop traffic and delete slivers.
     199== 15. Determine remote meso-scale compute resources and define RSpec ==
     200
     201== 16. Define a request RSpec for !OpenFlow network resources at the BBN InstaGENI AM ==
     202
     203== 17. Define a request RSpec for !OpenFlow network resources at the remote NLR Meso-scale site ==
     204
     205== 18. Define a request RSpec for the !OpenFlow Core resources ==
     206
     207== 19. Create the second slice ==
     208
     209== 20. Create a sliver for the BBN compute resources ==
     210
     211== 21. Create a sliver at the meso-scale site using FOAM at site ==
     212
     213== 22. Create a sliver at of the BBN InstaGENI AM ==
     214
     215== 23. Create a sliver for the !OpenFlow resources in the core ==
     216
     217== 24. Create a sliver for the meso-scale compute resources ==
     218
     219== 25. Log in to each of the compute resources and send traffic to the other endpoint ==
     220
     221== 26. As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers ==
     222
     223== 27. Verify that traffic is delivered to target according to the flowmods settings ==
     224
     225== 28. Review baseline, GMOC, and monitoring statistics ==
     226
     227== 29. Stop traffic and delete slivers ==