IG-EXP-1: Bare Metal Support Acceptance Test

This page captures status for the test case IG-EXP-1, which verified support for bare metal nodes. For overall status see the ExoGENI Acceptance Test Status page.

Test Status

This section captures the status for each step in the acceptance test plan.

Step	State	Date completed	Ticket	Comments
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8

State Legend	Description
Color(green,Pass)?	Test completed and met all criteria
Color( #98FB98, #100000 , Pass)?	Test completed and met most criteria. Exceptions documented
Color( #F0FFF0, #100000 , Complete)?	Test completed but requiring re-execution due to expected changes
Color( #B0E0E6, #100000 , Complete)?	Test completed with workaround for ticketed issue(s)
Color(#CAE1FF,Workaround)?	Test in progress with workaround for ticketed issue(s).
Color(#63B8FF,In Progress)?	Currently under test.
Color(red,Fail)?	Test completed and failed to meet criteria.
Color(orange,Blocked)?	Blocked by ticketed issue(s).

Test Plan Steps

1. Determine which nodes can be used as exclusive nodes.
2. Obtain 2 licensed recent Microsoft OS images for physical nodes from the site (BBN).
3. Reserve and boot 2 physical nodes using Microsoft image.
4. Obtain a recent Linux OS image for physical nodes from the InstaGENI list.
5. Reserve and boot a physical node using this Linux OS image.
6. Release physical node resource.
7. Modify Aggregate resource allocation for the rack to add 1 additional physical node.