EG-EXP-5: ExoGENI OpenFlow Network Resources Acceptance Test
This page captures status for the test case EG-EXP-5, which verifies the ability to <<insert goal here>>. For overall status see the ExoGENI Acceptance Test Status page.
Test Status
This section captures the status for each step in the acceptance test plan.
Step | State | Date completed | Ticket | Comments
|
Step 1 | | | |
|
Step 2 | | | |
|
Step 3 | | | |
|
Step 4 | | | |
|
Step 5 | | | |
|
Step 6 | | | |
|
Step 7 | | | |
|
Step 8 | | | |
|
Step 9 | | | |
|
Step 10 | | | |
|
Step 11 | | | |
|
Step 12 | | | |
|
Step 13 | | | |
|
Step 14 | | | |
|
Step 15 | | | |
|
Step 16 | | | |
|
Step 17 | | | |
|
Step 18 | | | |
|
Step 19 | | | |
|
Step 20 | | | |
|
Step 21 | | | |
|
Step 22 | | | |
|
Step 23 | | | |
|
Step 24 | | | |
|
Step 25 | | | |
|
Step 26 | | | |
|
Step 27 | | | |
|
Step 28 | | | |
|
Step 29 | | | |
|
Test Plan Steps
- As Experimenter1, Determine GPO compute resources and define RSpec.
- Determine remote meso-scale compute resources and define RSpec.
- Define a request RSpec for OF network resources at the BBN ExoGENI FOAM.
- Define a request RSpec for OF network resources at the remote I2 meso-scale site.
- Define a request RSpec for the OpenFlow Core resources
- Create the first slice
- Create a sliver for the GPO compute resources.
- Create a sliver at the I2 meso-scale site using FOAM at site.
- Create a sliver at of the BBN ExoGENI FOAM Aggregate.
- Create a sliver for the OpenFlow resources in the core.
- Create a sliver for the meso-scale compute resources.
- Log in to each of the compute resources and send traffic to the other end-point.
- Verify that traffic is delivered to target.
- Review baseline, GMOC, and meso-scale monitoring statistics.
- As Experimenter2, determine GPO compute resources and define RSpec.
- Determine remote meso-scale compute resources and define RSpec.
- Define a request RSpec for OF network resources at the BBN ExoGENI FOAM.
- Define a request RSpec for OF network resources at the remote NLR meso-scale site.
- Define a request RSpec for the OpenFlow Core resources
- Create the second slice
- Create a sliver for the GPO compute resources.
- Create a sliver at the meso-scale site using FOAM at site.
- Create a sliver at of the BBN ExoGENI FOAM Aggregate.
- Create a sliver for the OpenFlow resources in the core.
- Create a sliver for the meso-scale compute resources.
- Log in to each of the compute resources and send traffic to the other endpoint.
- As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers.
- Verify that traffic is delivered to target according to the flowmods settings.
- Review baseline, GMOC, and monitoring statistics.
- Stop traffic and delete slivers.