Changes between Version 25 and Version 26 of GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-5


Ignore:
Timestamp:
07/03/12 14:06:47 (12 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-5

    v25 v26  
    3434|| Step 24    ||[[Color(yellow,Complete)]]||                ||               ||
    3535|| Step 25    ||[[Color(yellow,Complete)]]||                ||               ||
    36 || Step 26    ||                       ||                   ||               ||
    37 || Step 27    ||                      ||                   ||               ||
    38 || Step 28    ||                       ||                   ||               ||
    39 || Step 29    ||                       ||                   ||               ||
     36|| Step 26    ||[[Color(#63B8FF,In Progress)]] ||                   ||Need to get NOX controller that supports flowmods from Niky Riga||
     37|| Step 27    ||[[Color(#63B8FF,In Progress)]] ||                   ||               ||
     38|| Step 28    ||[[Color(yellow,Complete)]]||                   ||               ||
     39|| Step 29    ||[[Color(yellow,Complete)]]||                   ||               ||
    4040
    4141
     
    281281
    282282
    283 
    284283== Step 26. As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers.  ==
     284Will get a NOX controller after GEC, checked with Niki Riga who will provide the controller.
    285285
    286286== Step 27. Verify that traffic is delivered to target according to the flowmods settings. ==
     287Same as previous step.
    287288
    288289== Step 28. Review baseline, GMOC, and monitoring statistics.  ==
     290Reviewed information for the ExoGENI port 15 on poblano for VLAN 1750 at:
     291
     292  http://monitor.gpolab.bbn.com/vlans/1750.html
     293
     294Port 15 is the port used the connect the ExoGENI rack switch to BBN OF site switch, which has the connections to the backbone and to another OpenFlow switch at BBN (habanero) where the local meso-scale MyPLC host is connected.
    289295
    290296== Step 29. Stop traffic and delete slivers. ==
    291297
     298Stopped ping traffic and review the statistics. Issue a delete sliver at each aggregate, which has not been yet completed, trying to run experiment as long as possible before GEC.