| 40 | 1. As Experimenter1, Request !ListResources RENCI ExoGENI. |
| 41 | 2. Review !ListResources output. |
| 42 | 3. Define a request RSpec for a VM at BBN ExoGENI, a VM at RENCI ExoGENI and an unbound exclusive non-!OpenFlow VLAN to connect the 2 endpoints. |
| 43 | 4. Create the first slice. |
| 44 | 5. Create a sliver at the RENCI ExoGENI aggregate using the RSpecs defined above. |
| 45 | 6. Log in to each of the systems, and send traffic to the other system, leave traffic running. |
| 46 | 7. As Experimenter2, Request !ListResources from RENCI ExoGENI. |
| 47 | 8. Define a request RSpec for one VM and one bare metal node each with two interfaces in the BBN ExoGENI rack, two VMs at RENCI, and two VLANs to connect the BBN ExoGENI to the RENCI ExoGENI. |
| 48 | 9. Create a second slice. |
| 49 | 10. In the second slice, create a sliver at the RENCI ExoGENI aggregate using the RSpecs defined above. |
| 50 | 11. Log in to each of the end-point systems, and send traffic to the other end-point system which shares the same VLAN. |
| 51 | 12. Verify traffic handling per experiment, VM isolation, and MAC address assignment. |
| 52 | 13. Construct and send a non-IP ethernet packet over the data plane interface. |
| 53 | 14. Review baseline monitoring statistics. |
| 54 | 15. Run test for at least 4 hours. |
| 55 | 16. Review baseline monitoring statistics. |
| 56 | 17. Stop traffic and delete slivers. |