| 21 | | || '''Step''' || '''State''' |
| 22 | | || 1 || [[Color(green,Pass)]] |
| 23 | | || 2A || [[Color(orange,Blocked)]] |
| 24 | | || 2B || [[Color(orange,Blocked)]] |
| 25 | | || 2C || [[Color(orange,Blocked)]] |
| 26 | | || 3A || [[Color(green,Pass)]] |
| 27 | | || 3B || [[Color(#B0E0E6,Complete)]] |
| 28 | | || 3C || [[Color(green,Pass)]] || || || || |
| 29 | | || 3D || [[Color(green,Pass)]] || || || || |
| 30 | | || 3E || [[Color(orange,Blocked)]] |
| 31 | | || 4A || || || || ready to test || |
| 32 | | || 4B || |
| 33 | | || 4C || |
| 34 | | || 4D || [[Color(orange,Blocked)]] |
| 35 | | || 5A || |
| 36 | | || 5B || |
| 37 | | || 5C || |
| 38 | | || 5D || |
| 39 | | || 6A || |
| 40 | | || 6B || |
| 41 | | || 6C || |
| | 21 | || '''Step''' || '''State''' || '''Date completed''' || '''Open Tickets''' || '''Closed Tickets/Comments''' || |
| | 22 | || 1 || [[Color(green,Pass)]] || 2012-02-24 || || || |
| | 23 | || 2A || [[Color(orange,Blocked)]] || || exoticket:11 || blocked on a full IP-to-hostname mapping for the subnet || |
| | 24 | || 2B || [[Color(orange,Blocked)]] || || || blocked on 2A || |
| | 25 | || 2C || [[Color(orange,Blocked)]] || || || blocked on 2B || |
| | 26 | || 3A || [[Color(green,Pass)]] || 2012-05-10 || || || |
| | 27 | || 3B || [[Color(#B0E0E6,Complete)]] || || exoticket:20 || (exoticket:10) [[BR]] access works properly for `xoadmins` members, but not for `bbnadmins` || |
| | 28 | || 3C || [[Color(green,Pass)]] || 2012-05-10 || || || |
| | 29 | || 3D || [[Color(green,Pass)]] || 2012-05-11 || || || |
| | 30 | || 3E || [[Color(orange,Blocked)]] || || || blocked on a working bare metal node implementation (vjo) || |
| | 31 | || 4A || [[Color(63B8FF,In progress)]] || || exoticket:22 || need to clarify a couple of inconsistencies in the rack layout diagram || |
| | 32 | || 4B || || || || ready to test || |
| | 33 | || 4C || || || || ready to test || |
| | 34 | || 4D || [[Color(orange,Blocked)]] || || exoticket:12 || blocked on government property form || |
| | 35 | || 5A || || || || ready to test || |
| | 36 | || 5B || || || || Tim is working with ExoGENI to get the vlan 1750 interface setup || |
| | 37 | || 5C || || || || ready to test || |
| | 38 | || 5D || || || || ready to test || |
| | 39 | || 6A || || || || ready to test || |
| | 40 | || 6B || || || || ready to test || |
| | 41 | || 6C || || || || ready to test || |
| | 471 | ==== Results of testing: 2012-05-11 ==== |
| | 472 | |
| | 473 | * Physical objects found in the rack: |
| | 474 | {{{ |
| | 475 | 41 management switch: 8052.bbn.xo |
| | 476 | 40 |
| | 477 | 39 dataplane switch: 8264.bbn.xo |
| | 478 | 38 |
| | 479 | 37 |
| | 480 | 36 |
| | 481 | 35 |
| | 482 | 34 |
| | 483 | 33 |
| | 484 | 32 |
| | 485 | 31 |
| | 486 | 30 |
| | 487 | 29 |
| | 488 | 28 |
| | 489 | 27 SSG5 (not mounted) |
| | 490 | 26 ^ ^ |
| | 491 | 25 iSCSI |
| | 492 | 24 |
| | 493 | 23 |
| | 494 | 22 |
| | 495 | 21 |
| | 496 | 20 |
| | 497 | 19 console |
| | 498 | 18 |
| | 499 | 17 |
| | 500 | 16 |
| | 501 | 15 |
| | 502 | 14 |
| | 503 | 13 |
| | 504 | 12 |
| | 505 | 11 |
| | 506 | 10 ^ ^ |
| | 507 | 09 worker 4: bbn-w4.bbn.xo |
| | 508 | 08 ^ ^ |
| | 509 | 07 worker 3: bbn-w3.bbn.xo |
| | 510 | 06 ^ ^ |
| | 511 | 05 worker 2: bbn-w2.bbn.xo |
| | 512 | 04 ^ ^ |
| | 513 | 03 worker 1: bbn-w1.bbn.xo |
| | 514 | 02 ^ ^ |
| | 515 | 01 head: bbn-hn.bbn.xo |
| | 516 | }}} |
| | 517 | * I was able to get the names of most objects (inlined above) from [https://wiki.exogeni.net/doku.php?id=public:hardware:rack_layout]. I found a few small issues: |
| | 518 | * Our iSCSI is mounted at U25-U26, where the diagram shows U24-U25. Is this an error in the diagram or an error in our rack? If the latter, should it be fixed, or just noted as a footnote on the rack diagram or elsewhere? |
| | 519 | * The SSG5 is not shown in that diagram. It's not rackmounted, but it is a networked device in the rack, so i think it would be good to label it so people can tell what it is. |
| | 520 | * No hostnames are given in the layout page for the iSCSI array, the SSG5, or the console. Of those, i think the iSCSI array and the SSG5 actually have hostnames (since they are networked), so let's agree on what they are. |
| | 521 | * Physical labelling of devices: |
| | 522 | * I assumed the names `bbn-iscsi`, `bbn-ssg5`, and `bbn-console` for the devices that don't have hostnames in ExoGENI's rack diagram, and will iterate later if needed. |
| | 523 | * I chose to label the SSG5 on the back only, because it doesn't take up an entire U, so the front is blocked by a panel, and turning the device around to label the other side seemed needlessly risky. |
| | 524 | * The switches don't really have any room on the front or back plates for labels, so i labelled them on the top edge on the front (i don't think anyone is ever going to look there), and on the bottom edge on the back (where i believe they are mounted at or above eye level for everyone who will be looking at the rack). |
| | 525 | * I updated our inventory without issue, and transferred a copy of my ascii rack diagram (above) over to that page. |
| | 526 | |
