Changes between Version 6 and Version 7 of GENILTE/LTEDeploymentRutgers

Timestamp:

09/19/17 13:00:00 (7 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENILTE/LTEDeploymentRutgers

@@ -261 +261 @@
 http://www.orbit-lab.org/wiki/Documentation/gWide/bLTESIM
 The last change that needs to be made is uncommenting the "persistent user
-database" 
-eld at the very end of mme.cfg:
+database" eld at the very end of mme.cfg:
 
   __Before:__
@@ -278 +277 @@
 
 
-= Licensing the EPC =
+= 5.0 Licensing the EPC =
 
 In order to license the Amarisoft EPC, one must use the provided USB-key.
 It must be plugged in directly to the GENI LTE EPC. First, mount the USB
-drive. Then, copy over the key 
-les to the home folder of the root user. For
+drive. Then, copy over the key les to the home folder of the root user. For
 convenience, it is worthwhile to edit /etc/fstab to have this drive auto mount
 in case it is ever unplugged:
@@ -289 +287 @@
 `UUID="device_block_id" /opt/license ext4 ro 0 0`
 
+
+**Important Note:** This will work for the current configuration, however, if
+the Amarisoft system ever gets re-licensed it will simply be a key file, with no
+USB drive. The same procedure (copying over to root's home folder) will still
+apply.
+
+
+= 6.0 GENI-site Base Station Con
+guration =
+
+GENI LTE EPC. It is important to note that all GENI sites should use the
+same network profile to connect to the EPC, unless if they need a local VLAN
+configured a new profile will need to be configured. This newly configured profile
+should be almost identical other than the newly updated VLAN tags. Within Netspan:
+
+ * Make a profile named AmarisoftMME1000 if one is not already there
+ * Set the following parameters:
+   {{{
+    MCC: 001
+    MNC: 01
+    MME IP: 10.3.0.250
+    SCTP Port: 36412
+
+ * Once the necessary changes have been made, restart your base station using the forced reset node option
+
+For convenience, the following image is included to help show how Netspan should be configured:
+
+
+
    __Before:__
   {{{