Changes between Version 35 and Version 36 of GENILTE/LTEDeployment
- Timestamp:
- 06/16/17 08:23:40 (7 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENILTE/LTEDeployment
v35 v36 24 24 25 25 = Get GENI Resource = 26 Reserve a dedicate raw pc for use as the ePC hosts. Use the following RSpecs: 27 - [Attach InstaGENI Gen7/8/9 Ubuntu14 raw pc request Rspec] 28 - [Attach ExoGENI bare metal node request RSpec] 29 30 Request the appropriate device for you site (IG, EG). 26 27 Reserve a dedicate GENI Raw PC running Ubuntu 16.04 to use as the ePC hosts. Note that the RSpec should include a request for the GENI AL2S LTE Multipoint VLAN. 28 Here is a sample RSpec [https://raw.githubusercontent.com/GENI-NSF/geni-support/master/wireless/lte-raw-pc-default-image.rspec lte-raw-pc-default-image.rspec] for requesting the raw-pc on the LTE Multipoint VLAN. 31 29 32 30 … … 37 35 = InstaGENI Site Installation = 38 36 39 == Installing 4.8 Kernel on I GEPC Resource ==40 41 After an Ubuntu 16 Raw PC was reserved in the GPO IGrack, the following procedure was followed to create the ePC setup:37 == Installing 4.8 Kernel on InstaGENI EPC Resource == 38 39 After an Ubuntu 16 Raw PC was reserved in the BBN InstaGENI rack, the following procedure was followed to create the ePC setup: 42 40 {{{ 43 41 … … 82 80 == Installing OAI Software == 83 81 84 Assuming you have completed the 4.8 Kernel installation , we proceed to install the !OpenAirInterface software as specified in the [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/GetSources OAI Repository]. Follow the instructions on the [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/GetSources OAI Repository] page.82 Assuming you have completed the 4.8 Kernel installation and enabled the GPRS module, we proceed to install the !OpenAirInterface software as specified in the [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/GetSources OAI Repository]. Follow the instructions on the [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/GetSources OAI Repository] page. 85 83 86 84 The wiki OAI Repository has a wiki page that captures [https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/HowToConnectCOTSUEwithOAIeNBNew How to Connect OAI ePC with COTS User Equipment]. Following are installation steps followed: