Changes between Version 27 and Version 28 of GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/Setup

Timestamp:

10/19/14 00:33:10 (10 years ago)

Author:

sedwards@bbn.com

Comment:

--

GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/Setup

@@ -267 +267 @@
 <ol  type='a' start='3'>
 <li>
-First, select "<tt>+ Add</tt>" under the <b>Install Scripts</b> sections as shown.  In the box in the <b>URL</b> field enter (cut-and-paste): <br>
+First, select "<tt>Add</tt>" under the <b>Install Scripts</b> sections as shown.  In the box in the <b>URL</b> field enter (cut-and-paste): <br>
 <pre>http://www.gpolab.bbn.com/experiment-support/ccnx/ccnx-0.6.1-F15-x64.tar.gz</pre>
 and enter
@@ -274 +274 @@
 <br>
 <br>
-Now, select "<tt>+ Add</tt>" under the <b>Install Scripts</b> again.  This time add: <br>
+Now, select "<tt>Add</tt>" under the <b>Install Scripts</b> again.  This time add: <br>
 <pre>http://www.gpolab.bbn.com/experiment-support/ccnx/ccnx-atmos-F15-x64.tar.gz</pre>
 and enter <br>
@@ -289 +289 @@
 <br>
 
-  <li>In a similar manner, use the "<tt>+ Add</tt>" button under the <b>Execute Scripts</b> section to add three execute services on this node:
+  <li>In a similar manner, use the "<tt>Add</tt>" button under the <b>Execute Scripts</b> section to add three execute services on this node:
 <br>
 <pre>