Changes between Version 5 and Version 6 of GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/AppendixStitching

Timestamp:

06/14/15 19:47:17 (9 years ago)

Author:

sedwards@bbn.com

Comment:

--

GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/AppendixStitching

@@ -68 +68 @@
       <li>Create a new slice with the name of your choice.</li>
       <li>Click the <i>Add Resources</i> button on the Slice page.</li>
-      <li>Load your 5 node RSpec from before or use: <a href="http://www.gpolab.bbn.com/exp/labone/lab1ccn-5node.xml">http://www.gpolab.bbn.com/exp/labone/lab1ccn-5node.xml</a></li>
+      <li>Load your 5 node RSpec from before or use: <br/><a href="http://www.gpolab.bbn.com/exp/labone/lab1ccn-5node.xml">http://www.gpolab.bbn.com/exp/labone/lab1ccn-5node.xml</a></li>
       <li>Drag a second site onto the canvas.</li>
       <li>Drag <tt>ccnx-router-1</tt> and <tt>user-0</tt> to the second site.</li>
-      <li>When we are done, we will have a total of 6 nodes with 3 nodes at each site.  So set the <tt>NUM_NODES</tt> parameter of <tt>ccnx-setup</tt> from 5 to 3 on all the nodes.
+      <li>When we are done, we will have a total of 6 nodes with 3 nodes at each site.  So set the <tt>NUM_NODES</tt> parameter of <tt>ccnx-setup</tt> from 5 to 3 on all the nodes.  Also adjust the <tt>BARRIER_NODE</tt> for the nodes in the new site.
 <ol>
 <li>