Changes between Version 3 and Version 4 of GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/AppendixStitching

Timestamp:

06/14/15 19:38:17 (9 years ago)

Author:

sedwards@bbn.com

Comment:

--

GENIExperimenter/Tutorials/jacks/GettingStarted_PartII_ccn/Procedure/AppendixStitching

@@ -60 +60 @@
     </ol>
 <h3><u> 2. Setup the Topology: </u></h3>
+<h4><u> 2b. Add a second site: </u></h4>
 <table>
 <tr>
@@ -76 +77 @@
       <li>Auto-IP all of the links.</li>
       <li>Set the <tt>NEXT_HOP</tt> node on <tt>ccnx-router-1</tt> to be the IP address of the <tt>ccnx-router</tt>'s data interface on the link between the two <tt>ccnx-router</tt> nodes.
-
+   </ol>
+</td>
+<td>
+<img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/Tutorials/Stitching/Procedure/SetLinkType.png" alt="route topology"  align="center" width="350" title="topology" /> 
+<br/>
+<b>Figure 1</b> Set the Link Type on the inter-aggregate link.
+</td>
+</tr>
+</table>
+
+
+<h4><u> 2b. Make the link be stitched: </u></h4>
+<table>
+<tr>
+<td>
+   <ol>
       <li>Click on the unlabeled box in the middle of the link.  Select "Stitched Ethernet" as the link type.</li>
    </ol>