Changes between Version 5 and Version 6 of GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/DesignSetup

Timestamp:

10/30/14 17:50:55 (9 years ago)

Author:

sedwards@bbn.com

Comment:

--

GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/DesignSetup

@@ -319 +319 @@
          <ol  type='a' start='11'>
             <li>Now click on the unlabeled box in the middle of the link.</li>
-            <li>Enter an IP Address for the "node-0/client" interface of <i>10.1.1.1</i>.</li>
+            <li>Enter an IP Address for the "node-0/NodeA" interface of <i>192.168.1.10</i>.</li>
             <li>Enter a Mask of <i>255.255.255.0</i>.</li>
-            <li>Scroll down further and set IP Address of the "node-1/server" interface to <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li>
+            <li>Scroll down further and set IP Address of the "node-1/NodeB" interface to <i>192.168.1.11</i> and a Mask of <i>255.255.255.0</i>.</li>
+            <li>Continue by setting the IP addresses and masks as shown in Figure X-X.</li>
           </ol>
        </td>