Changes between Version 19 and Version 20 of GENIExperimenter/Tutorials/jFed/GettingStarted_PartII_ccn/Procedure/Setup

Timestamp:

10/17/14 14:34:09 (10 years ago)

Author:

rrhain@bbn.com

Comment:

--

GENIExperimenter/Tutorials/jFed/GettingStarted_PartII_ccn/Procedure/Setup

@@ -267 +267 @@
 <ol  type='a' start='3'>
 <li>
-First, select "<tt>Boot Scripts</tt>" tab as shown and then the green "+" button.  In the URL box enter (cut-and-paste): <br>
+First, select "<tt>Boot Scripts</tt>" tab as shown and then the green "+" button after <b>Download Sources:</b>.  In the URL box enter (cut-and-paste): <br>
 <pre>http://www.gpolab.bbn.com/experiment-support/ccnx/ccnx-0.6.1-F15-x64.tar.gz</pre>
 and enter
@@ -274 +274 @@
 <br>
 <br>
-Now, select the green "<tt>+</tt>" again.  This time add: <br>
+Now, select the green "<tt>+</tt>" after <b>Download Sources:</b> again.  This time add: <br>
 <pre>http://www.gpolab.bbn.com/experiment-support/ccnx/ccnx-atmos-F15-x64.tar.gz</pre>
 and enter <br>
@@ -289 +289 @@
 <br>
 
-  <li>In a similar manner, use the "<tt>+ Add Execute Service</tt>" button to add three execute services on this node:
+  <li>In a similar manner, use the green "<tt>+</tt>" button after <b>Execute Commands:</b>to add three execute services on this node:
 <br>
 <pre>