Changes between Version 5 and Version 6 of GENIExperimenter/Tutorials/PortalOmniExample/ExecuteExperiment

Timestamp:

07/05/13 14:23:40 (11 years ago)

Author:

Gary Wong

Comment:

Renumber the steps to continue from the previous page.

GENIExperimenter/Tutorials/PortalOmniExample/ExecuteExperiment

@@ -48 +48 @@
 
 
-= Instructions =
+== 6.1 Wait for experiment setup ==
 
 Although the Omni {{{createsliver}}} client request has finished, the
@@ -71 +71 @@
 manager nickname and your slice name (both found on your worksheet).
 
-If it reports that the sliver is not yet ready (for example, it might say that the status is "changing"), then please wait a minute
+2. If it reports that the sliver is not yet ready (for example, it might say that the status is "changing"), then please wait a minute
 or two and try again.  Once everything is complete, {{{readyToLogin.py}}}
 will give output that should look something like this:
@@ -85 +85 @@
 }}}
 
-2. Copy and paste the {{{ssh}}} command lines directly into your terminal
+== 6.2 Log in to nodes ==
+
+1. Copy and paste the {{{ssh}}} command lines directly into your terminal
 to log in to either of your hosts.  While you're welcome to inspect either
 one, for the purpose of this experiment, the {{{client}}} host is the one
@@ -107 +109 @@
 double-check the {{{rspec}}} you used in the previous step.)
 
-The client machine is saving all the test results in the {{{/tmp/iperf-logs}}}
+2. The client machine is saving all the test results in the {{{/tmp/iperf-logs}}}
 directory.  Files with timestamps in the names will gradually appear
 there (there are 100 tests overall, and it may take 20 minutes for all