Changes between Version 48 and Version 49 of GENIExperimenter/Tutorials/OpenFlowOVS/Appendix


Ignore:
Timestamp:
02/20/15 14:06:10 (9 years ago)
Author:
Aaron Helsinger
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIExperimenter/Tutorials/OpenFlowOVS/Appendix

    v48 v49  
    55'''Notes about this tutorial'''
    66   * This is '''not''' a standalone tutorial.  Please refer to the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS Intro to OpenFlow using OVS] for background.
    7    * The topology used in this experiment is the same as the one used in the  [wiki:GENIExperimenter/Tutorials/OpenFlowOVS Intro to OpenFlow using OVS] tutorial: Three virtual machines (VMs) connected by an !OpenFLow switch. However this tutorial uses the hardware !OpenFlow switch on the rack instead of a software OVS switch.
     7   * The topology used in this experiment is the same as the one used in the  [wiki:GENIExperimenter/Tutorials/OpenFlowOVS Intro to OpenFlow using OVS] tutorial: Three virtual machines (VMs) connected by an !OpenFlow switch. However this tutorial uses the hardware !OpenFlow switch on the rack instead of a software OVS switch.
    88   * If you have not reserved a controller yet, make sure you to create a slice that will run the !OpenFlow controller: Reserve a VM running the controller using the request RSpec [http://www.gpolab.bbn.com/exp/OpenFlowOVS/pox-controller.rspec].  This RSpec is available at the Portal and is called  "XEN VM POX Ctrl"
    99