Changes between Version 37 and Version 38 of GENIExperimenter/Tutorials/OpenFlowOVS/Appendix
- Timestamp:
- 07/22/14 10:50:54 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/OpenFlowOVS/Appendix
v37 v38 3 3 = Appendix - Move to HW switches = 4 4 5 '''Note:" This is not a standalone tutorial. Please refer to the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS Intro to OpenFlow using OVS] for background. 5 '''Notes about this tutorial:''' 6 * This is '''not''' a standalone tutorial. Please refer to the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS Intro to OpenFlow using OVS] for background. 7 * The topology used in this experiment is the same as the one used in the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS Intro to OpenFlow using OVS] tutorial: Three virtual machines (VMs) connected by an !OpenFLow switch. However this tutorial uses the hardware !OpenFlow switch on the rack instead of a software OVS switch. 8 * You will use the same controller you developed in the previous tutorial. Make sure it is still running. 6 9 7 The topology used in this experiment is the same as the one used in the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS Intro to OpenFlow using OVS] tutorial: Three virtual machines (VMs) connected by an !OpenFLow switch. However this tutorial uses the hardware !OpenFlow switch on the rack instead of a software OVS switch.8 9 You will use the same controller you developed in the previous tutorial. Make sure it is still running.10 10 11 11 GENI offers access to hardware !OpenFlow switches. Each !OpenFlow switch, in most cases, can support only one controller. There are two ways of slicing the controller flowspace: … … 18 18 * Bind the Xen VMs to different physical hosts. 19 19 20 == = 1. !Design/Setup ===20 == 1. !Design/Setup == 21 21 22 22 The RSpecs for this tutorial are site specific. If you are attending a tutorial, use the site and IP network that was given to you on your worksheet. If you are doing this at home, choose a site from : `clemson, cornell, gatech, gpo, illinois, kansas, kentucky, kettering, max, missouri, northwestern, nysernet, nyu, sox, stanford, wisconsin`. 23 23 24 === = 1.1 Find your RSPecs ====24 === 1.1 Find your RSPecs === 25 25 26 26 ''In the URLs below, replace <AGGREGATE-NAME> with the name of the site you are using (clemson, cornell, kansas, kentucky, kettering, max, northwestern, nysernet, stanford or wisconsin). '' … … 34 34 35 35 36 === = 1.2 Edit your RSpecs ====36 === 1.2 Edit your RSpecs === 37 37 38 38 Open your RSpec in a text editor to make the following changes: … … 48 48 49 49 50 === =1.3 Reserve Resources ===50 === 1.3 Reserve Resources === 51 51 52 52 '''If you are using a private VLAN:''' [[BR]]