Changes between Version 31 and Version 32 of GENIExperimenter/Tutorials/OpenFlowOVS/Appendix

Timestamp:

07/22/14 10:13:04 (10 years ago)

Author:

Vic Thomas

Comment:

--

GENIExperimenter/Tutorials/OpenFlowOVS/Appendix

@@ -16 +16 @@
    * Bind the Xen VMs to different physical hosts.
 
-
-=== Design/Setup ===
+=== 1. !Design/Setup ===
 
 The rspecs for this tutorial are site specific. If you are attending a tutorial then use the site and IP network that was given to you on your worksheet, if you are doing this at home choose a site out of : `clemson, cornell, gatech, gpo, illinois, kansas, kentucky, kettering, max, missouri, northwestern, nysernet, nyu, sox, stanford, wisconsin`. 
 
-==== Find your RSPecs ====
+==== 1.1 Find your RSPecs ====
 
 ''In the URLs below, replace <AGGREGATE-NAME> with the name of the site you are using (clemson, cornell,  kansas, kentucky, kettering, max, northwestern, nysernet, stanford or wisconsin). ''
@@ -33 +32 @@
 
 
+==== 1.2 Edit your RSpecs ====
 
+Open your RSpec in a text editor to make the following changes:
+
+'''If you are using a private VLAN:'''   [[BR]]
+    * Replace the string <CONTROLLER_IP> (at the bottom of the RSpec) with the IP address of your controller.
+
+'''If you are using a shared VLAN:'''[[BR]]
+    * In the RSpec for flowspace resources, replace:
+         - SITE with the site you are using
+         - NETWORK with the one in your worksheet.  If you are doing this at home, use a network between 10.20.30 - 10.20.49