Changes between Version 14 and Version 15 of GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup
- Timestamp:
- 03/02/17 09:28:29 (7 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup
v14 v15 7 7 == Step 1. Obtain Controller Resources == 8 8 9 The topology in this experiment is the same as the one in the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/DesignSetup OpenFlow using OVS with Floodlight] tutorial: Three Virtual Machines (VMs)connected by an !OpenFlow switch. However, this tutorial uses a hardware !OpenFlow switch instead of a software OVS switch.9 The topology in this experiment is similar to the one in the [wiki:GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/DesignSetup OpenFlow using OVS with Floodlight] tutorial. It uses three Virtual Machines (VMs) that are connected by an !OpenFlow switch. However, this tutorial uses a hardware !OpenFlow switch instead of a software OVS switch. 10 10 11 11 [[Image(GENIExperimenter/Graphics:SimpleHardwareOpenFlow.jpg,40%)]] … … 44 44 Open your RSpec in a text editor to insert the IP address of your controller. This is done by replacing the string <CONTROLLER_IP> at the bottom of the RSpec with the IP address of your controller. The controller line looks as follows: 45 45 46 {{{ <emulab:openflow_controller url="tcp:CONTROLLER_IP:6633"/>}}} 46 {{{ 47 <emulab:openflow_controller url="tcp:CONTROLLER_IP:6633"/> 48 }}} 47 49 48 50