Changes between Version 12 and Version 13 of GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup

Timestamp:

03/01/17 14:56:19 (7 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup

@@ -33 +33 @@
 In the URLs below, replace the <AGGREGATE-NAME> with the name of the site you are using (clemson, cornell,  kansas, uky, max, stanford or wisconsin). The RSpec for the second slice is available at: 
 
-{{{https://raw.githubusercontent.com/GENI-NSF/geni-tutorials/master/OpenFlowHW/pvtVlan/ig-<AGGREGATE-NAME>.rspec}}}. 
+ {{{ https://raw.githubusercontent.com/GENI-NSF/geni-tutorials/master/OpenFlowHW/pvtVlan/ig-<AGGREGATE-NAME>.rspec}}}. 
 
 For example, if you are working with max-ig, then you can get the sample RSPec as follows:
@@ -44 +44 @@
 Open your RSpec in a text editor to insert the IP address of your controller. This is done by replacing the string <CONTROLLER_IP> at the bottom of the RSpec with the IP address of your controller.  The controller line looks as follows:
  
-{{{<emulab:openflow_controller url="tcp:CONTROLLER_IP:6633"/>}}}
+ {{{ <emulab:openflow_controller url="tcp:CONTROLLER_IP:6633"/>}}}
 
 
@@ -52 +52 @@
 Use your favorite resource reservation tool (Omni, jFed, Portal) to reserve your resources.  For example, if you are using Omni and the MAX IG aggregate:
 
-{{{omni -a max-ig createsliver <YOUR_SLICE_NAME> ig-max.rspec }}}
+ {{{ omni -a max-ig createsliver <YOUR_SLICE_NAME> ig-max.rspec }}}
 
 
@@ -73 +73 @@
 
  {{{ curl http://localhost:8080/wm/device/ | python -m json.tool}}}
-[[BR]]