Changes between Version 52 and Version 53 of GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/Execute

Timestamp:

03/02/17 10:17:38 (7 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/Execute

@@ -185 +185 @@
 === 4f. Topology Details ===
 
-Before we insert flows into the Open vSwitch, we are going to need all the details regarding the topology such as the DPID of the Open vSwitch, MAC addresses of the hosts, the port numbers on which the Hosts are connected to the Open vSwitch etc. These details can be found out by issuing the following command in a new Controller terminal:
+Before we insert flows into the Open vSwitch, we are going to need all the details regarding the topology such as the Data Path IDentifier (DPID) of the Open vSwitch, the MAC addresses of the hosts, and the port numbers on which the Hosts are connected to the Open vSwitch etc. These details can be found by issuing the following command in a new Controller terminal:
 
 {{{
@@ -197 +197 @@
 [[Image(GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/Execute:Topology_Details.png, 90%)]]
 
-[[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png, 5%, nolink)]] Highlighted are all the important details you need to note down before you start manipulating flows. Note down all the highlighted details for each '''Host'''. The Host IP's will be of the form 10.0.0.* for Host *.
+[[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png, 5%, nolink)]] Highlighted are all the important details you need to note down before you start manipulating flows. Note the highlighted details are for the Switch Data Path IDentifier (DPID) and for each '''Host'''. The Host IP's will be of the form 10.0.0.* for Host *.