Changes between Version 11 and Version 12 of GENIExperimenter/Tutorials/NFV/Ryu


Ignore:
Timestamp:
05/17/17 15:24:27 (7 years ago)
Author:
matta@cs.bu.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIExperimenter/Tutorials/NFV/Ryu

    v11 v12  
    1212== Part I: !Design/Setup ==
    1313      - First complete steps 1-3 in this [wiki:GENIExperimenter/Tutorials/NFV/DesignSetup page].
    14       - Ryu controller should be installed on your controller node (reserved in Step 3.1). You can verify it by running following command on controller node. [[BR]]
     14      - The Ryu controller should be installed on your controller node (reserved in Step 3.1). You can verify it by running the following command on the controller node. [[BR]]
    1515      '''/tmp/ryu/bin/ryu-manager --verbose /tmp/ryu/ryu/app/simple_switch.py'''  [[BR]] If Ryu is installed correctly, you should see the following output:
    1616