Changes between Version 39 and Version 40 of GENIExperimenter/Tutorials/GettingStarted_PartII_Hadoop/Procedure/DesignSetup
- Timestamp:
- 03/09/14 15:13:03 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/GettingStarted_PartII_Hadoop/Procedure/DesignSetup
v39 v40 411 411 <ol type='a' start='4'> 412 412 <li>Now set the properties of the links in your topology: IP addresses, net masks and link capacity. To do this click on the i button on <i>link0</i>. </li> 413 <li>Specify the IP addresses and netmasks by switching tothe Interfaces tab and enter the information from Table 3-4.</li>413 <li>Specify the IP addresses and netmasks on the Interfaces tab and enter the information from Table 3-4.</li> 414 414 <li>Switch to the Properties tab and set the link’s capacity to 100Mbps by entering 100000000 in the box labeled Capacity. (Note: Flack will report that this is 100Gb/s but it is actually 100Mb/s.) Click "Apply" when you are done. 415 415 </li>