Context Navigation

DesignSetup

-                      v38
+                      v39
   <ol type='a' start='4'>
 <li>Now set the properties of the links in your topology: IP addresses, net masks and link capacity. To do this click on the i button on <i>link0</i>. </li>
+<li>Specify the IP addresses and netmasks by switching to the Interfaces tab and enter the information from Table 3-4.
+  Click "Apply" when you are done.</li>
+<li>Switch to the Properties tab and set the link’s capacity to 100Mbps by entering 100000000 in the box labeled Capacity.  (Note: Flack will report that this is 100Gb/s but it is actually 100Mb/s.)
+<li>Specify the IP addresses and netmasks by switching to the Interfaces tab and enter the information from Table 3-4.</li>
+<li>Switch to the Properties tab and set the link’s capacity to 100Mbps by entering 100000000 in the box labeled Capacity.  (Note: Flack will report that this is 100Gb/s but it is actually 100Mb/s.)   Click "Apply" when you are done.
   </li>
 </ol>