Changes between Version 20 and Version 21 of GENIExperimenter/Tutorials/GettingStarted_PartII_Hadoop/Procedure/DesignSetup
- Timestamp:
- 03/07/14 13:37:29 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/GettingStarted_PartII_Hadoop/Procedure/DesignSetup
v20 v21 241 241 242 242 </ol> 243 <li>Repeat for each of the three nodes and the link.</li> 243 <li>Repeat for each of the three nodes.</li> 244 <li>For the link, go to the <i>Interfaces</i> tab and set the IP addresses and masks as specified in the table below.</li> 245 <li>Switch to the properties tab and set the link’s bandwidth 100Mb/s Set capacity: 100000000 (note: Flack will report that this is 100Gb/s but it is actually 100Mb/s) 244 246 245 247 <table border="0" cellpadding="0" cellspacing="0"><tr><td><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/warning-icon-hi.png?format=raw" width='50' height='50'/></td><td>Be very careful when entering this information -- these commands will not