Changes between Version 1 and Version 2 of GENIExperimenter/Tutorials/GettingStarted_PartI/Procedure/DesignSetup
- Timestamp:
- 01/16/14 16:04:06 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/GettingStarted_PartI/Procedure/DesignSetup
v1 v2 318 318 <ol type='a' start='10'> 319 319 <li>Now click on "Interfaces and Links" (this is the middle tab with the "link" symbol").</li> 320 <li>Enter the Desired IP Address for this node which is listed on your worksheet.</li>321 <li>Enter the DesiredMask of <i>255.255.255.0</i>.</li>320 <li>Enter an IP Address for this node of <i>10.1.1.1</i>.</li> 321 <li>Enter a Mask of <i>255.255.255.0</i>.</li> 322 322 <li>Then Press "Apply" at the bottom of the screen.</li> 323 <li>Repeat the above six steps for the second VM, labeling it "server" and setting the server's Desired IP Address.</li>323 <li>Repeat the above six steps for the second VM, labeling it "server" and setting the server's IP Address to <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li> 324 324 </ol> 325 325 </td>