Changes between Version 9 and Version 10 of GENIExperimenter/Tutorials/GENI_Desktop_and_GEMINI_tables/ExecuteExperiment

Timestamp:

06/24/13 11:00:24 (11 years ago)

Author:

griff@netlab.uky.edu

Comment:

--

GENIExperimenter/Tutorials/GENI_Desktop_and_GEMINI_tables/ExecuteExperiment

@@ +1 @@
+[[PageOutline]]
 {{{
 #!html
@@ -24 +25 @@
 of the topology, it is not immediately obvious which slivers (nodes) are managed by each of the GNs.  Consequently, to find 
 the GN for any particular node in the topology, one can select the desired sliver (node) and then click on the live view button.
-This will bring up a "live view" window (see below).
+This will bring up a '''live view''' window (see below).
 
 [[Image(LiveView.png)]]
@@ -30 +31 @@
 == Viewing packet traces  ==
 
-To view packet traffic traces, 
+To view packet traffic traces, you can run the '''wireshark''' application on a node to capture and display packet traces.
+To launch wireshark on a node, open up the node's menu item (on the left in the live view window).  Select the 
+VNC link.  You will be presented with the option to run wireshark or to run an xterm.  Select wireshark which will generate a list of log messages and then will open the wireshark in an X-window.  You can then run wireshark as normal.
+
+[[Image(VNC.png)]]
 
 == Access X-based Applications ==
 
-say something
+You can run any X-based application on your VM nodes by selecting VNC and then selecting xterm.  This will 
+open up an xterm on an X-window display (all inside your browser).  You can then run any X-window application 
+from the xterm.
 
 == Configure and Manage the GN(s) ==
 
-talk about configuration
+To configure which data the GENI Desktop collects by default, click on the "Config" link in the live view's menu on the left hand side and then select "Configure Data Collection & Display Settings".
 
 == __Exercise Tasks__ ==