Changes between Version 18 and Version 19 of GENIExperimenter/ExperimentExample-stitching


Ignore:
Timestamp:
07/16/13 09:26:39 (11 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIExperimenter/ExperimentExample-stitching

    v18 v19  
    77
    88
    9 The experiment uses [http://groups.geni.net/geni/wiki/GeniClearinghouse GENI Clearinghouse] credentials with the omni tool named ''stitcher.py''.  GENI network stitching does not require any special configuration. If you haven't already configured Omni, please follow [http://trac.gpolab.bbn.com/gcf/wiki/OmniConfigure/Automatic these configuration instructions].
     9The experiment uses [http://groups.geni.net/geni/wiki/GeniClearinghouse GENI Clearinghouse] credentials with the omni tool named ''stitcher.py''.  GENI network stitching does not require any special configuration. If you haven't already configured Omni, please follow [http://trac.gpolab.bbn.com/gcf/wiki/OmniConfigure/Automatic these configuration instructions]. If you need assistance, please contact [mailto:help@geni.net].
    1010
    1111== 1. Design the Stitching Experiment ==
    … …  
    439439== Additional Stitching Scenarios ==
    440440
    441 
     441Additional stitching scenarios have been tested and some example request RSpec can be used as a reference at
     442this [http://groups.geni.net/geni/browser/trunk/stitch-examples location]:
     443
     444  - stitch-pg-utah-ig-utah.rspec  - Utah PG to Utah InstaGENI
     445  - stitch-ig-gpo-pg-uky.rspec  - GPO InstaGENI to UKY PG       
     446  - stitch-eg-gpo-ig-utah.rspec - GPO ExoGENI to Utah InstaGENI         
     447  - stitch-ig-gpo-pg-utah.rspec - GPO IG to Utah PG     
     448  - stitch-pg-uky-ig-utah.rspec - UKY PG to Utah InstaGENI     
     449  - stitch-pg-utah-pg-uky.rspec - Utah PG to UKY PG
     450  - stitch-max-ig-utah.rspec -  MAX MyPLC to Utah InstaGENI             
     451  - stitch-pg-utah-ig-gpo.rspec - Utah PG to Utah InstaGENI             
     452  - stitch-3linear.rspec - 3 node linear topology (Utah IG <=> Utah PG <=> GPO IG)             
     453  - stitch-4linear.rspec - 4 node linear topology (Utah IG <=> Utah PG <=> GPO IG <=> MAX MyPLC)                         
     454  - stitch-triangle.rspec - triangle topology (Utah PG<=>Utah KY<=> GPO IG <==> Utah PG)
     455
     456
     457If additional help is needed please contact [mailto:help@geni.net]
     458