Changes between Version 117 and Version 118 of GENIExperimenter/ExperimentExample-OF-FOAM

Timestamp:

04/25/12 11:25:50 (12 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIExperimenter/ExperimentExample-OF-FOAM

@@ -223 +223 @@
    * VLAN 1750 is mapped to the Core VLAN 3715 on ''poblano'' port 3.
 
-Note: For the BBN ''habanero'' OF switch *only*, you must add 24 to the physical port number to determine the port to use in the rspec.  
-
-Based on the image details you can determine the following:
+As described in the diagram, for the BBN ''habanero'' OF switch *only*, you must add 24 to the physical port number to determine the port to use in the RSpec, which has the following implications:
  * The host ''navis.bbn.com'' is on port 32 to which you add the required 24 (32+24=56),  which means your RSpec will use  port ''56''. 
  * The switch ''habanero'' is connected to poblano via port 47 to which you add the required 24 (47+24=71), which means your RSpec will use port ''71''.  
@@ -329 +327 @@
  * Host ''wings-openflow-2.wail.wisc.edu'' is connected to port ''22''.
  * The OF switch with the host has a DPID of ''06:d6:00:23:47:cc:44:00'' 
- * The OF switch with the hosts uses port ''1'' to connect to another switch where VLAN 1750 is mapped to 3715.
+ * The OF switch with the hosts uses port ''1'' to connect to a second switch where VLAN 1750 is mapped to 3715.
+ * The second OF switch has a DPID os ''06:d6:00:21:f7:be:8d:00''.
  * The second OF switch uses port ''C3'' to map VLAN 1750 to 3715. Following instruction on diagram, you must add 48 to the C port number to determine the !OpenFlow port number to use in the RSpec. The !OpenFlow port number to use is ''51'' (48+3).