Changes between Version 111 and Version 112 of GENIExperimenter/ExperimentExample-OF-FOAM

Timestamp:

04/23/12 15:53:00 (12 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIExperimenter/ExperimentExample-OF-FOAM

@@ -359 +359 @@
 ==== NLR !OpenFlow Aggregate ====
 
-To define the NLR OF RSpec review the [http://groups.geni.net/geni/wiki/SiteNlr#OpenFlow OpenFlow DPIDs] table for the core in the [http://groups.geni.net/geni/wiki/SiteNlr National LambaRail] GENI page. From the table you can see the DPIDs for NLR !OpenFlow VLAN 3715. You may choose to use only the two core sites (Chicago and Atlanta) associated with the three experiment sites, but you can also choose to define all DPIDs in the NLR Core for VLAN 3715, which is how this example is shown:
+To define the NLR OF RSpec review the [http://groups.geni.net/geni/wiki/SiteNlr#OpenFlow OpenFlow DPIDs] table for the core in the [http://groups.geni.net/geni/wiki/SiteNlr National LambaRail] GENI page. From the table you can see the DPIDs for NLR !OpenFlow VLAN 3715. You may choose to use only the two core sites (Chicago and Atlanta) associated with the three experiment sites, but you can also choose to define all DPIDs in the NLR Core for VLAN 3715. This example  uses all sites and does not define any port to simplify the experiment workflow. So if you add a site, there is no need to delete, re-create, and re-approved the sliver.  Here are the NLR definitions:
 {{{
    <openflow:group name="nlr-3715">
@@ -378 +378 @@
    </openflow:match>
 }}}
-
 
 The NLR !OpenFlow request RSpec will be completed in [wiki:GENIExperimenter/ExperimentExample-OF-FOAM#Step3:GenerateOpenFlowV3RSpec Step 3].