Changes between Version 22 and Version 23 of GEMINIv3/genidesktop_faq
- Timestamp:
- 03/06/14 14:00:09 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GEMINIv3/genidesktop_faq
v22 v23 10 10 === After login , i see my slices , but it says "No Resources Present" even though i have slivers reserved. === 11 11 You may have the wrong Aggregate managers selected, or they system automatically picked some for you which are not correct. You need to manually select the Aggregate managers you have used for this slice, so that the Genidesktop knows who to communicate with in-order to get information about your slice and nodes. Follow the arrows to set the AMs appropriately. Then select the slice using the checkbox and perform the "Update Status" operation again on that slice. [[BR]] 12 [=#set_ams] 12 13 [[Image(wiki:GD:no_resources.png,25%,align=left)]] 13 14 [[Image(wiki:GD:set_am.png,10%,align=center)]][[BR]] … … 35 36 }}} 36 37 If your slice details (when you mouse over) has any of the _IN_PROGRESS states, then this may not be recoverable and you may have to delete the slice and start over. 37 3. Change the AM selection for this slice to the one with the least state. In our example from (2) GN0 is in the CREATED state which is the least. So we set the AM to KY-IG using the method mentioned .38 3. Change the AM selection for this slice to the one with the least state. In our example from (2) GN0 is in the CREATED state which is the least. So we set the AM to KY-IG using the method mentioned [#set_ams [here].