Changes between Version 4 and Version 5 of GEMINI/Tutorial/GEC21/GENI_Desktop_and_GEMINI_blipp/ExecuteExperiment


Ignore:
Timestamp:
10/22/14 09:00:54 (9 years ago)
Author:
mkeele@indiana.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEMINI/Tutorial/GEC21/GENI_Desktop_and_GEMINI_blipp/ExecuteExperiment

    v4 v5  
    3535
    3636----
    37 [[Image(wiki:GEMINI/Tutorial/Images:start_blipp_log.png)]]
     37[[Image(wiki:GEMINI/Tutorial/Images:services.png)]]
    3838----
    3939
    40 Click the 'BLiPP Test' tab. Here you can configure a measurement probe to be run by BLiPP. We'll start with a Ping test. Select a node to configure from the source dropdown menu [[Image(wiki:GEMINI/Tutorial/Images:select_node.png)]], then fill the rest of the form.
     40Click the 'BLiPP Test' tab. Here you can configure a measurement probe to be run by BLiPP. We'll start with a Ping test. Select a node to configure from the source dropdown menu [[Image(wiki:GEMINI/Tutorial/Images:blipp_test.png)]], then fill the rest of the form.
    4141
    4242For example, below we configure a ping test. At the moment, only a single target may be configured per test.  You can also add external hosts (i.e., outside of the slice) to ping by entering an IP or hostname in the Destination box.
    4343
    44 [[Image(wiki:GEMINI/Tutorial/Images:ping_test.png)]]
     44[[Image(wiki:GEMINI/Tutorial/Images:measurements.png)]]
    4545----
    4646
    47 Once configured, BLiPP will poll UNIS, update its configuration, and begin collecting the desired measurements.  The scheduled measurement will be seen below in the log by clicking the 'BLiPP Log' button. Be sure to click the 'BLiPP Log' button as you schedule new tests. If you would like a bigger view, click the 'Full Log' button. The event types for each measurement will be displayed alongside each scheduled test row.  Once data is available (give it a few minutes to begin collecting!), you can select an event type and display the associated graph.
     47Once configured, BLiPP will poll UNIS, update its configuration, and begin collecting the desired measurements.  The scheduled measurement will be seen above in the table by clicking the 'Measurements' tab. On the 'Metadata' tab you can see event types generated for each measurement submitted.  Once data is available (give it a few minutes to begin collecting!), you can select an event type, 'View Data', and display the associated graph.
     48
     49[[Image(wiki:GEMINI/Tutorial/Images:ping_metadata.png)]]
     50
     51[[Image(wiki:GEMINI/Tutorial/Images:ping_graph.png)]]
    4852
    4953----
     
    156160 *   - 'r': the ratio of the value/duration(ns) (prefix=r for rate)       
    157161
    158