214 | | For this step, we'll change the approach a bit and switch to a new client tool: the command line Omni client. |
215 | | |
216 | | === 5.1. Configure Omni === |
217 | | |
218 | | 1. Go to your browser tab with the GENI Portal page. |
219 | | 1. On that page, select the tab labeled "Profile". This is on the upper right of the page. |
220 | | 1. Scroll down to the section labeled "Option 1: Automatic omni configuration". |
221 | | 1. Click on "customized configuration data" in Step 2 of this section. |
222 | | 1. Make sure your default project is "ICDCS13". If not, make that your default. |
223 | | 1. Click "Download omni bundle" and "save" the file. The file is saved in your Downloads folder. |
224 | | 1. Open a terminal window and type {{{omni-configure.py -f portal}}}. The cert and key files you need will be installed in the appropriate folders. |
225 | | |
226 | | === 5.2. Send the {{{CreateSliver}}} request to the AM === |
227 | | |
228 | | Once Omni is installed and configured, bringing up the sliver you designed earlier is a one-step procedure. Just enter the command: |
| 214 | For this step, we'll change the approach a bit and switch to a new client tool: the command line Omni client. From a terminal, please enter the command: |