Changes between Version 13 and Version 14 of GEC17Agenda/AdvancedOpenFlow/Procedure/Execute
- Timestamp:
- 07/20/13 02:23:55 (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GEC17Agenda/AdvancedOpenFlow/Procedure/Execute
v13 v14 61 61 ovs-vsctl del-controller br0 62 62 }}} 63 - '''Note''':Do not start another experiment (i.e., drag and drop the file icon in !LabWiki and press "Start Experiment") before your current experiment is finished.63 [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:warning-icon-hi.png,5%)]] Do not start another experiment (i.e., drag and drop the file icon in !LabWiki and press "Start Experiment") before your current experiment is finished. 64 64 65 65 === 3.2 Run the experiment in paths with different bandwidth === … … 99 99 - Copy the above solution into your home directory then re-do the experiment on !LabWiki. 100 100 101 '''Note:'''you need to change your script to use the correct Load Balancing controller (e.g., if your controller is "load-balancer-solution.rb", you should run "/opt/trema-trema-f995284/trema run /root/load-balancer-solution.rb")101 [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png,5%)]] you need to change your script to use the correct Load Balancing controller (e.g., if your controller is "load-balancer-solution.rb", you should run "/opt/trema-trema-f995284/trema run /root/load-balancer-solution.rb") 102 102 - Reren the experiment using your new OpenFlow Controller following steps in Section 2.5, check the graphs plotted on !LabWiki as well as the controller's log on node "Switch" and see the difference. 103 103 - When your experiment is done, you need to stop the Load Balancer: